ReviewsPetg Filament

XYZPrinting PETG Filament 1.75mm, NFC Chip, 3D Printer Filament, 600g (1.3lbs), Dimensional Accuracy +/- 0.02 mm, Fit Most 3D Printers, Clear Blue

【Accuracy & Consistency】--- XYZprinting PETG filament has strict tolerance. Diameter 1.75mm, dimensional accurcy +/- 0.02mm. produces quality prints with good tensile strength, surface quality, minimal warping and surface finish. It can be printed at a low temperature and does not require a heated bed..
【Clog-free & Bubble-Free】-- Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience. Complete drying for 24 hours before vacuum aluminum foil packaging, which can effectively protect the PETG filament from moisture. As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result.
【Less- tangle and Easy to Use】-- Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed.
Larger spool inner diameter design makes feeding smoother.
【NFC Chip】--- XYZprinting NFC chip is attached to the filament spool ring and sends pre-set print settings to the 3D printer. This automatically sets up the optimized profile of your material and lets you know how much filament is left..
【Wide Compatibility】--- Create prints with XYZprinting PETG filame....

Check Stock

NovaMaker PETG 3D Printer Filament 1.75 - Black 1.75mm PETG Filament, PETG 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.03mm.

✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
✅【Best Quality PETG Filament】Made by USA virgin PETG material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.02 mm..
✅【Tangle-Free Tips】Black PETG Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
✅【Printing Tips】Recommended Prting Temperature 230°C - 250°C, Bed 70°C - 80°C. PETG Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..

Check Stock

NovaMaker PETG 3D Printer Filament 1.75, Clear PETG Filament 1.75mm, Transparent PETG 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm

✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
✅【Best Quality PETG Filament】Made by USA virgin PETG material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.02 mm..
✅【Tangle-Free Tips】Clear PETG Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
✅【Printing Tips】Recommended Prting Temperature 230°C - 250°C, Bed 70°C - 80°C. PETG Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..

Check Stock

Inland 1.75mm White PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.

Check Stock

Inland 1.75mm Black PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.

Check Stock

NOVAMAKER PETG Black Filament 1.75mm ,Toughness Enhanced petg Vacuum Sealed,Accuracy +/- 0.02mm, 1kg(2.2lbs) Spool, 3D Filament petg

✅【Toughness Enhanced】Ease of printing, high purity with low shrinkage and superb layer bonding.Novamaker PETG filaments will meet your demands for printing projects of functional parts with higher toughness..
✅【Clog-Free & Bubble-Free】Novamaker dry petg 1.75mm filament for 48 hours before packaging and vacuum sealed in nylon rebag. No stringing and warping issues,easy to use..
✅【Tangle Less】Advanced take-up device, PLC automatic precise wire arranging to make sure the line tidy and less-tangle and guarantee the petg filament 1.75 tidy and easy to be fed..
✅【Dimensional Consistency】1.75 mm petg, dimensional accuracy + / - 0.02 mm,giving you a great printing experience with no clog. 1 kg spool..
✅【All Lifetime Warranty】Recommended extrusion/nozzle temperature 230°C - 250°C,net weight 1kg spool. Fast and effective 24 x 7 professional customer support providing technical solution of novamaker petg black filament..

Check Stock

Inland 1.75mm Translucent Blue PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.

Check Stock

SUNLU PETG-G 3D Printer Filament 1.75mm 1 kg Spool, Better Flow of SUNLU no plugging Premium PETG-G Filament 1.75 +/- 0.02 mm for 3D Printing，Black

【Tangle Free& No Plugging】 Better flow of SUNLU no plugging premium 1.75mm PETG-G filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. 100% New Virgin Material FROM Korea..
【High Precision +/- 0.02mm Tolerance】: 1.75mm PETG-G 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy..
【Rigid, Tough, High Performance 3D Printing Material】3d printer filament PETG-G 1.75 is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It's about as stiff as PLA. and is highly resistant to temperatures at above 60°C(140°F)..
【Recommended Printing Temp/Nozzle Temperature】: PETG-G 3d printer filament suggest printing temperature is 215-230°C(419-446°F).Bed/Platform temperature of 60-80°C(140-176°F)..
【High Compatiblity &100% Enviromental Material】: Works and harmonizes....

Check Stock

TPOIMNS PETG Filament 1.75mm, 3D Printer Filament, 1kg Roll Spool(2.2lbs), Dimensional Accuracy +/- 0.02 mm, Compatible with Most FDM 3D Printers, Black

【Strong PETG Filament】PETG is a thermoplastic material that is essentially odorless when printed, has printability close to PLA+, has outstanding toughness and high impact strength, is weather resistant, and is your filament of choice for printing tough items and providing a glossy finish..
【High Accuracy & Consistency】Advanced CCD diameter measurement and adaptive control system in manufacturing ensure that these PETG filaments have a diameter of 1.75 mm with a dimensional accuracy of +/-0.02 mm and a net weight of 1kg spool (2.2 lbs)..
【Neatly arranged & Easy to Use】 Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed, Larger spool inner diameter design makes feeding smoother..
【No Clogging & No Bubble】The raw materials are dried before manufacturing, no clogging, super strong interlayer bonding and great fluidity, making the extrusion process smooth and stable. Completely dried for 24 hours before packing and vacuum sealed with desiccant inside the bag to protect the filament from moisture and no clogging and bubbling problems..

Check Stock

MSNJ PTEG K6 Filament 1.75mm 3D Printer Filament Food Contact Grade High Temperature Resistance 1kg Spool

PETG K6 is a performance-upgraded PETG with more excellent mechanical properties and high temperature resistance, making 3D printing more versatile..
PETG K6's food contact characteristics make it safe and reliable to contact food with a temperature of up to 100C. In the scene of printing tableware,....
PREMIUM PETG FILAMENT: PETG 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, meeting your demands for....
HIGH COMPATIBILITY & WIDE APPLICABILITY:Support almost all FDM 3D printers on market，which are widely used in industrial production, medical....
DIMENSIONAL ACCURACY & CONSISTENCY: Advanced CCD diameter measuring and self-adaptive control system in the manufacturing ensure strict tolerances.....

Check Stock

GIANTARM PETG 3D Printer Filament Toughness Enhanced 1kg (2.2lbs),1.75mm Dimensional Accuracy +/-0.03mm, 1080 Feet（330m)/Roll, Vacuum Package, Fit for Most 3D FDM Printer, Green

【Premium PETG Filament】GIANTARM PETG filament combine the advantages of PLA and ABS, it’s hard and durable, with high purity, low shrinkage and excellent adhesion, which makes your printing more delicate..
【High Print Quality】No clogging, no tangles, no bubbles to ensure smooth feeding and stable printing, so that the printed parts have excellent surface finish and high precision. Recommended PETG Filament Extrusion/Nozzle Temperature 220-250°C, heated Bed Temp:80°C-90°C..
【Dimensional Accuracy】Diameter: 1.75mm.
Tolerances: +/- 0.03 mm, 1 kg spool (2.2lbs).Perfectly suitable for common FDM 3D printers on the market..
【Professional vacuum sealed packaging】The filament is placed in a sealed vacuum bag with desiccant to prevent moisture absorption and keep out dust, and to avoid nozzle clogging..
【Service After Sale】Each PETG is carefully designed and produced by our team, and has been thoroughly tested to ensure quality. If you are not satisfied or do not meet your expectations, please feel free to contact us and we will try our best to help you solve the problem..

Check Stock