ReviewsPetrol Boring Tools

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

STP Gas Treatment (3 pack)

  • STP Car Petrol Treatment 200ml (CLO51200EN) New..
  • STP Petrol Treatment used regularly helps save fuel by keeping fuel intake systems clean of harmful deposits.
  • fight rust and corrosion in the fuel system.
  • reduce exhaust emissions. Use every 1000 miles / 1600 kms. Safe to use with other STP additives..
  • Suitable for all classic and modern engines, catalytic converters..
Check Stock

DASBET 12V 60W Oil Change Pump Extractor, Oil/Diesel Fluid Pump Extractor Scavenge Oil Change Pump Transfer Suction Transfer Pump + Tubes Truck Rv Boat ATV

  • 【Specificaiton】: Input Voltage: DC 12V.
  • Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min.
  • 【 Ideal Equipment For 】: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
  • 【Easy Installation】: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly..
  • 【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc).
Check Stock

Electric Fuel Pump Assembly for Ram 1500 2012 Ram 2500 2011-2018 Ram 3500 2013-2017

  • YHTAUTO Affordable and Prime Fuel Pump Module Assembly, Directly Fit.
  • Ram 2500 2011-2018 V8 5.7L, 2014-2018 V8 6.4L Petrol.
  • Fits Ram 3500 2013-2017 V8 5.7L, 2014-2017 V8 6.4L Petrol.
  • Reference Number: 4792870AB, 5145587AC, 68086502AA, E7275M, 375GE, FG1432.
  • 1 year unlimited-mileage quality guarantee.
Check Stock

Amarine Made 12V 60W Oil Change Pump Extractor, Oil/Diesel Fluid Pump Extractor Scavenge Oil Change Pump Transfer Suction Transfer Pump with Tubes Truck Rv Boat ATV (60W)

  • 【Specificaiton】: Input Voltage: DC 12V.
  • Motor Oil (40-60 degrees) Flow Rate: approx. 0.8-1.0L / min.
  • 【Easy Installation】: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly..
  • 【 Ideal Equipment For 】: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
  • 【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc).
Check Stock

ASZLBYM 5/8'' inch CNC Lathe Indexable Turning Tool Holder with Nickel Plated,CNC Heavy-Duty Metal Lathe Bit Set with Tin Coated Carbide Turning Inserts WNMG431 CNMG431 TNMG331 16ER AG60

  • ◆ UNIQUE: Boring Bar suitable for finishing and semi-finishing, good toughness..
  • ◆QUALITY: Boring Bar Lathe high strength and hardness, durable in use, improved the surface gloss of the cutting pieces.
  • ◆FUNCTION: Boring Bar Set suitable for machining steel, reduce the tool grinding cost and improve the cutting efficiency.
  • ◆APPLICATION: Lathe Tools Set tightly impacted bolt, simple structure, often used for small hole machining..
  • ◆GET: 2 Boring Bar( S12M-SDUCR07 + SDJCR1212H07 ) + 2 Wrench + 10 Carbide Inserts ( DCMT070204 ).
Check Stock

Carbide Boring Bar, Boring Bar Holders Small Bore Inner Hole Turning Tool Tungsten Steel Carbide Boring Bar Φ12mm SHB25‑12

  • ❤Stable: High accuracy, good clamping capability and stable retaining, can insure stable working of boring tool..
  • ❤Design: Practical accessories of lathe inner diameter tools and small diameter CNC special tool..
  • ❤Model SHB25‑12: Model SHB25‑12, means that the outer diameter is 25mm/0.98in, and the clamp boring tool diameter is 12mm/0.47in..
  • ❤Tungsten steel: Manufactured from premium tungsten steel material, has high hardness, not easy to damage and corrosion..
  • ❤Easy to operate: Fine workmanship, compact and lightweight lathes tools, easy to operate..
Check Stock

Gasoline Ride on Mower Zero Turn Lawn Mower with Hydraulic Gearbox CJ30GZZHL150

  • Petrol Lawn Mower Push Lawn Mower Garden Machine Grass Trimmer.
  • Mower lawn tractor tractor mini push bubble car lawn mower.
  • Motor garden tools field grass trimmer machine for cut grass.
  • Gasoline lawn mower with engine, Hand Push Electric Lawn Mower Factory.
  • lawnmower self-Propelled adjustable red gasoline lawn mower.
Check Stock

Gasoline Ride on Mower Zero Turn Lawn Mower with Hydraulic Gearbox CJ30GZZHL150

  • Petrol Lawn Mower Push Lawn Mower Garden Machine Grass Trimmer.
  • Mower lawn tractor tractor mini push bubble car lawn mower.
  • Motor garden tools field grass trimmer machine for cut grass.
  • Gasoline lawn mower with engine, Hand Push Electric Lawn Mower Factory.
  • lawnmower self-Propelled adjustable red gasoline lawn mower.
Check Stock

1/2\ Lathe Threading Tool External/Internal Threading Holder SER 1212H11+ SNL 0008K11 Threading Holder with 11ER AG60 11IR AG60 Threading Inserts (SER1212H11+SNL0008K11+11ER AG60)

  • ♥Package includes ：1PC SNR0008K11 + 1PC SNR0010K11 + 1PC SNR0012M11 turning tools + 3PCS 11IR A60 turning inserts + 3PCS T8 wrench.
  • ♥3pcs Thredaing boring bars : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥3pcs 11IR A60 boring inserts : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm. Inserts are made of carbide and the coating material is TiN ,it Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥Package: The carbide inserts and turning tools holder are packed in plastic containers, safe and easy to store ..
  • ♥ If you need more 11IR A60, please search ASIN：B09496NZ3R.
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock