ReviewsPhanteks Mini Itx

Thermaltake CA-1Q9-00S1WN-00 S100 Tempered Glass Black Edition Micro-ATX Mini-Tower Computer Case with 120mm Rear Fan Pre-Installed

  • Supports M ATX and Mini ITX Form Factor Motherboards. Motherboards 6.7” x 6.7” (Mini ITX) , 9.6” x 9.6” (Micro ATX).
  • Designed for use in either a vertical or horizontal orientation on the motherboard.
  • Chamber concept design with optimized cable management space for small form factor builds.
  • Stackable and flexible thermal solution. Remarkable expansion. Advance ventilation.
  • 2x USB 3.0, 1x Headphone, 1x Mic Front Ports, Internal Bay: 3x 3.5 inches or 2.5 inches.
Check Stock

Thermaltake Core V21 SPCC Micro ATX Mini ITX Cube Gaming Computer Case Chassis Small Form Factor Builds 200mm Front Fan Pre-installed CA-1D5-00S1WN-00 Black

  • Supports M ATX and Mini ITX Form Factor Motherboards. Motherboards 6.7” x 6.7” (Mini ITX) , 9.6” x 9.6” (Micro ATX).
  • Designed for use in either a vertical or horizontal orientation on the motherboard.
  • Chamber concept design with optimized cable management space for small form factor builds.
  • Stackable and flexible thermal solution. Remarkable expansion. Advance ventilation.
  • 2x USB 3.0, 1x Headphone, 1x Mic Front Ports, Internal Bay: 3x 3.5 inches or 2.5 inches.
Check Stock

Phanteks PH-ES614LTG_AG Chassis/Tempered Glass Panel, Full Tower ATX Case, Anthracite Grey

  • Sandblasted aluminum faceplates. Ambient lighting with LED control (10 colors). Clean interior – Hidden PSU& HDDs.
  • Tempered Glass Panel on hinges. Easy accessibility to fans and dust filters. Equipped with Phanteks’ Velcro cable ties. 27.5mm cable management space + additional cable compartment (39mm)..
  • Equipped with Phanteks’ PWM Hub. 2x USB 3.0, 2x USB 2.0, Headphone, Mic, Reset, LED Switch. 2x SSD Bracket Included. Removable HDD Cages..
  • Compatible with Phanteks RGB LED Strips and RGB Motherboards. Asus Aura and Mystic Light Ready..
  • Easy Radiator Installation. Reservoir Mounts. Pump Bracket.
Check Stock

Iesooy DC 12V 250W 24Pin Pico ATX Switch Pico PSU Auto Mini ITX High Power Supply Module ITX

  • Product introduction: 250 Watt Output 12 Volt DC Input,Fanless design, 100% silent,24 pin ATX connector, Plugs directly into the ATX connector,Perfect DC PSU for mini ITX Motherboards.
  • Working operation: Input voltage: +12V/DC(11.4-12.6V), DC input: 2.5mm inner diameters, 5.5mm outer diameter, Input Current: Max. 21A, Output Power: 250W, Power Efficiency: >= 85%, Working temperature/humidity: 15℃ to 35℃ / 45%-75%, Reposition temperature//humidity: -40℃ to +70℃/ 10%-90%, Atmospheric pressure: 86Kpa—106Kpa.
  • Strong durability: Adopt industrial solid capacitor, ideal for being used in harsh evironment, High performance with high heat-stand feature, more reliable, Solid Polymer Caps on the PCBA, Long life.
  • Wide range of applications: MINI computers, one computer, POS, digital set-top boxes, ITX chassis, network servers, advertising, banking terminals, etc.
  • Package includes: 1 x DC-ATX 250W Module (with cable).
Check Stock

Phanteks Halos 140mm Digital LED Fan Frame,Black (PH-FF140DRGBP_BK01)

  • There is no compromise on performance. Even high-quality fans made from PBT material, like Phanteks’ MP and SP fans, can now be illuminated..
  • Light is spread evenly thanks to high density Digital LED’s and diffuser..
  • Daisy chain all of Phanteks’ Digital RGB products together..
  • Sync the Digital RGB LED lighting with any Digital RGB equipped Phanteks digital RGB and motherboard. Compatible with Asus (Aura Sync), MSI (Mystic light)..
  • The Halos Lux series Digital RGB Fan Frame can be mounted directly to the fan with the included fan screws or mounted to a radiator mounted fan using the UNC 6-32 radiator screws..
Check Stock

Phanteks 3 Pin Digital RGB LED (PH-CB-DRGB3P_MB) 600mm Extension Adapter Cable for Motherboard - Black

  • 600mm in length and flexible for easy cable routing and management.
  • Synchronize and control using Phanteks DRGB cases or compatible addressable RGB motherboards.
  • The cable features two connectors one for Phanteks DRGB products and the other for third party addressable RGB products.
  • Compatible with Asus MSI Gigabyte and Asrock addressable RGB motherboards.
  • Connector 1 x 3 Pin adapter (Female 5V Data X Ground) to MB DRGB PIN header (Male) 1 x 3 Pin adapter (Male 5V Data X Ground) to split another DRGB adapter 1 x 3pin connector (Female 5V Data X Ground) to PHANTEKS DRGB Device.
Check Stock

Phanteks Halos 120mm Digital LED Fan Frame, Black (PH-FF120DRGBP_BK01)

  • Illuminate any fan. There is no compromise on performance. Even high quality fans made from PBT material, like Phanteks MP and SP fans, can now be illuminated..
  • High density Digital LED. Light is spread evenly thanks to high density Digital LEDs and diffuser..
  • Easy cable routing. Daisy chain all of Phanteks Digital RGB products together.
  • Sync Digital RGB lighting. Sync the Digital RGB LED lighting with any Digital RGB equipped Phanteks digital RGB and motherboard. Compatible with Asus (addressable Aura Sync), MSI (Mystic Rainbow light)..
  • Mounting screws included. The Halos Lux series Digital RGB Fan Frame can be mounted directly to the fan with the included fan screws or mounted to a radiator mounted fan using the UNC 6-32 radiator screws..
Check Stock

Phanteks Halos Lux Digital LED 140mm Fan Frame Alum, Black (PH-FF140DRGBA_BK01)

  • The Halos Lux is milled from one single block of aluminum and anodized in Satin Black..
  • There is no compromise on performance. Even high quality fans made from PBT material, like Phanteks’ MP and SP fans, can now be illuminated..
  • Light is spread evenly thanks to high density Digital LED’s and diffuser. Daisy chain all of Phanteks’ Digital RGB products together..
  • Sync the Digital RGB LED lighting with any Digital RGB equipped Phanteks digital RGB and motherboard. Compatible with Asus (Aura Sync), MSI (Mystic light)..
  • The Halos Lux series Digital RGB Fan Frame can be mounted directly to the fan with the included fan screws or mounted to a radiator mounted fan using the UNC 6-32 radiator screws..
Check Stock

Phanteks PH-EC416PTG_BK Eclipse P400 Steel ATX Mid Tower Case Tempered Glass Edition Satin Black

  • Full Metal Body, Steel Exterior and Tempered Glass Side Panel. Clean interior –PSU Cover & HDDs. 10 color RGB downlight + RGB power light with....
  • Fully Equipped with Magnetic Dust Filters. Innovative Modular HDD System (requires PH-HDDKT_02). 2x Drop-N-Lock SSD brackets included. Long GPU....
  • Full Size PSU support. Removable HDD cage for installation of long PSU's (>270mm)/water-pump..
  • Hidden Front I/O (2x USB 3.0, Headphone, Mic, LED Control, Reset). Clean cable management using Phanteks' preinstalled Hoop-N-Loop cable ties..
  • Optimal airflow - Direct airflow to CPU/GPU. 1x Phanteks 120mm Fan in front. 1x Phanteks 120mm Fan in rear. Supports water-cooling radiators (up to....
Check Stock

HLT PCI- E 3.0 16X Graphics Card Vertical Kickstand/Base Magnetic Standoff DIY ATX case Computer Graphics Card Holder Black with Extension Cord

  • Phanteks patented P.A.T.S (Physical Antioxidant Thermal Shield) technology dramatically increases the cooling performance and reliability of PH-TC90LS....
  • Phanteks patented C.P.S.C Technology is a new innovative forming deposit tht transfers heat onto corresponding metals at a more rapidly rate.....
  • The PH-TC90LS is made to ensure it has the least amount of air and thermal resistance. To prevent mechanical conflicts with other components,....
  • Phanteks PH-F90 PWM Premium fans uses UFB (Updraft Floating Balance) bearing, Nine blades and MAFO (Maelstrom Air-Fort Optimization) drive system to....
  • PH-TC90LS takes less than 1 minute to install. It requires 4 screws and the rotational back plate for the Intel LGA 2011/1155/1156 to tightly secure....
Check Stock

Phanteks PH-FF140RGBP_BK01 Halos RGB Fan Frame High density LEDs RGB 140mm fan mounting

  • Illuminate any fan. There is no compromise on performance. Even high quality fans made from PBT material, like Phanteks' MP and SP fans, can now be illuminated.
  • High density LED. Light is spread evenly thanks to high density LED's and diffuser. Easy cable routing. Daisy chain all of Phanteks' RGB products together.
  • Sync RGB lighting. Sync the RGB lighting with any RGB equipped Phanteks case and motherboard. Compatible with Aura Sync, Mystic light, RGB Fusion.
  • Mounting screws included. The Halos RGB Fan Frame can be mounted directly to the fan with the included fan screws or mounted to a radiator mounted fan using the UNC 6-32 radiator screws.
  • Compatibility: 140 fan mounting. RGB LED type: RGB LED strip hard board , +12V, G,R,B. LED Number: 21pcs.
  • RGB4P connector for motherboard is required and sold separately.
Check Stock