ReviewsPhase Control Thyristor

Eogifee Universal Ceiling Fan Remote Control and Receiver Kit with 3 Speed and Light Dimmer Control Replacement of Hampton Bay Harbor Breeze Hunter FAN-53T 2AAZPFAN-53T UC7030T FAN-11T KUJCE9103 Kit

  • This Universal Ceiling Fan Remote Control kit is specifically made for Hunter, Hampton Bay and Harbor Breeze fans, but it also works most 3-speed AC ceiling fans.
  • The remote controller controls your ceiling fan speed and light brightness, with Hi/Med/Low 3-speed and OFF to control fan, LIGHT/DIMMER button controls the brightness of haloge, incandescent, and some dimmable LED/CFL lights.
  • Our receiver is FAN28R-240W, Rated power is 240W, Maximum Range of Remote Control up to 60 Feet. Uses 2 upgraded relays, with the new component the dimming function of the relay is better than the thyristor, more powerful, safer and smaller.
  • Satisfaction Guarantee--New Original Genuine OEM, FCC, UL approved, Original Replacement perfect for Hampton Bay UC7078T UC7067 Fan-HD UC7083T, with wire nuts, easy to install.
  • Note: If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock

Huanyang Vector VFD Variable Frequency Drive ,Single to 3 Phase,7.5kW 10HP 220V AC 34A for Motor Speed Control ,GT Series

  • 【Connection way】Input：220VAC(+/-5%) 1 or 3phase（for single-phase input, just connect the input wire to the R and S terminals） .Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz.
  • 【Features】With better performance and stability.Adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency.support fast accelerate/deccelerate with external optional braking resistor and external potentiometer,and.
  • 【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc..
  • 【Good Noise Control】The product has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life..
  • 【Warranty】: 1 Year replace .If there is an error in the product and you do not know how to operate, please contact the seller.
Check Stock

LAPOND High Performance VFD Inverter VFD Drive 2.2KW 220V 3HP 9.6A,Variable Frequency Drive for Motor Speed Control,SVD-PS Series

  • This is single phase VFD with single phase 220V INPUT and three phase 220V OUTPUT,ONLY work with 3 phase 200-250V asynchronous motor,If your motor is heavy load, pls choose a higher Horsepower vfd than your motor's or contact sales for model selection suggestion..
  • SVD-PS Series VFD has better performance Vector controlled and stability to enable motor to achieve high torque in low speed rotation to increase motor working efficiency.
  • support fast accelerate/deccelerate with external optional braking resistor(100W ≥70Ω) and external potentiometer(10K).
  • Rich of digital and analogy control terminals for versitile control, well controlled fans produce low acoustics noise.The fan only work in VFD running status..
  • Application : spindle motor,lathe,milling,pumps,treadmills,conveyors,winding machine, mixer, extruder, slitter, compressor, ventilator,elevator,centrifuger and other machines..
  • We are the original factory,any technical issues do not hesitate to contact us.
Check Stock

Transistor Meter Aideepen LCR-TC1 Multi-Function Capacitance Resistance ESR Tester 1.8 Full Color Display Transistor Meter for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET

  • 【Wild Application】:1.8" Full Color Display,Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, Mega328,BJT, resistor and capacitor and various electric transistor testing..
  • 【Built-in Battery】:Built-in lithium battery, convenient and effective, the indicator light shows green when fully charged. Warm Reminder: The charging input voltage is 4.5V, please do not use it under overpressure, otherwise the tester will be damaged..
  • 【Add IR Decoder】: After the component detection is completed, the infrared remote control at the tester "IR" test hole, press the remote control key, the tester will be display the user code & data code and the corresponding infrared waveform after the successful decoding.
  • 【Auto shut-down Function】: Our advanced electronic transistor tester owns auto shut-down function.Convenient and practical..
  • 【Extra accessories】: use accessories, more convenient and efficient to complete your project(Please refer "Product guides and documents"to get user manual).
Check Stock

MC14046BCP Phase Lock Loop (PLL) IC 1.9MHz 1 16-DIP (0.300\

  • The CD4046B CMOS Micropower Phase-Locked Loop (PLL) consists of a low-power, linear voltage-controlled oscillator (VCO) and two different phase comparators having a common signal-input amplifier and a common comparator input..
  • Very low power consumption: 70 µW (typ.) at VCO, VCO inhibit control for ON-OFF keying and ultra-low standby power consumption fo = 10 kHz, VDD = 5 V, Source-follower output of VCO control input (Demod. output), 100% tested for quiescent current at 20 V.
  • Operating frequency range up to 1.4 MHz (typ.) at VDD = 10 V, RI = 5 k, High VCO linearity: 003c1% (typ.) at VDD = 10 V, 5-V, 10-V, and 15-V parametric ratings.
  • Low frequency drift: 0.04%/°C (typ.) at VDD = 10 V, Choice of two phase comparators: Exclusive-OR network (I) Edge-controlled memory network with phase-pulse output for lock indication (II), Zener diode to assist supply regulation, Standardized, symmetrical output characteristics, Meets all requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of 'B' Series CMOS Devices".
  • A Versatile Building Block for Micropower Digital and Analog Applications, Example Applications: FM demodulator and modulator, Frequency synthesis and multiplication, Frequency discriminator, Data synchronization....
Check Stock

MXR M107 Phase 100

  • With 10 stages of programmable phase shifting, the MXR M-107 Phase 100 guitar effects pedal features adjustable intensity for sweep width and notch depth.
  • Controls provide for regeneration in 2nd and 4th position.
  • This big brother of the Phase 90 offers a broader range of sounds in a larger unit.
  • Along with the speed control there is a four-position rotary switch that selects four different intensities, defined as preset waveform patterns.
  • Between the intensity and speed settings, you'll find quite a supply of excellent sounds tucked away in this orange casing.
Check Stock

Leviton 51110-SRG Residential Surge Protection Panel

  • LEDs show power and surge protection status for each phase.
  • Protection for up to 26,000 amps of surge current per mode.
  • Compatible with Decora Home Control devices.
  • Cost effective surge-protection for commercial/residential environments.
  • Compatible with Decorah Home Control devices.
Check Stock

Huanyang VFD,Single to 3 Phase,Variable Frequency Drive,2.2kW 3HP 110V/120V Input AC 20A for Motor Speed Control ,HY Series

  • 【Connection way】Input：110VAC(+/-10%) single phase (connect the input wire to any two terminals of the RST） .Output：3phase 110v. Frequency：0-50hz/60hz. 0-400hz.
  • 【Multiplex terminal】Unlike other inexpensive VFDS, this VFD has two sets of terminal functions,Rich of digital and analogy control terminals for versitile control,optional MODBUS (RS485) extension,diversified parameter setting.
  • 【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc..
  • 【Good Noise Control】The product has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life..
  • 【Warranty】: 1 Year replace .If there is an error code in the product and you do not know how to operate, please contact the seller.
Check Stock

1pcs/lot Brand CD4HC7046AE 74HC7046 DIP-16 Phase-Locked Loop

  • The CD4046B CMOS Micropower Phase-Locked Loop (PLL) consists of a low-power, linear voltage-controlled oscillator (VCO) and two different phase comparators having a common signal-input amplifier and a common comparator input..
  • Very low power consumption: 70 µW (typ.) at VCO, VCO inhibit control for ON-OFF keying and ultra-low standby power consumption fo = 10 kHz, VDD = 5 V, Source-follower output of VCO control input (Demod. output), 100% tested for quiescent current at 20 V.
  • Operating frequency range up to 1.4 MHz (typ.) at VDD = 10 V, RI = 5 k, High VCO linearity: 003c1% (typ.) at VDD = 10 V, 5-V, 10-V, and 15-V parametric ratings.
  • Low frequency drift: 0.04%/°C (typ.) at VDD = 10 V, Choice of two phase comparators: Exclusive-OR network (I) Edge-controlled memory network with phase-pulse output for lock indication (II), Zener diode to assist supply regulation, Standardized, symmetrical output characteristics, Meets all requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of 'B' Series CMOS Devices".
  • A Versatile Building Block for Micropower Digital and Analog Applications, Example Applications: FM demodulator and modulator, Frequency synthesis and multiplication, Frequency discriminator, Data synchronization....
Check Stock

SVS Prime Wireless SoundBase

  • Mcacc Pro the pinnacle of pioneer’s auto room Tuning technology analyzes the phase and group delay characteristics to precisely control phase differences between speakers Mcacc Pro corrects phase differences in all ranges and all channels from phase difference in the original audio material to the sound emitted from the speakers.
  • The sc-lx904 is IMAX enhanced Certified to deliver the powerful sound just as intended by the Filmmaker and provide the immersive experience on your home theater.
  • Two 384 kHz/32-bit ESS DACs (ES9026PRO) same as the ones used for Pioneers PD-70AE SACD player are used for all channels With extremely precise D/A conversion and high S/N ratio the DAC provides powerful sound full of rich details.
  • The SC-LX904 is compatible with 7 2 4ch/7 2 2ch/5 2 4ch configuration of Dolby Atmos You can reproduce object- oriented sound in smooth curving movements or the realistic three-dimensional movement overhead by the top speakers Other audio codecs such as PCM and DSD can be upmixed using Dolby Surround for enjoying 3D surround sound.
  • DTS X is the next-generation audio codec from DTS that leverages object-based audio to enable new immersive and interactive audio experiences Since DTS X can automatically adapt the audio to the existing channel....
Check Stock