ReviewsPhase Jointers With Helicals

RIDGID 69632 9-1/4 x 11-Inch Black Model 9 Forged Anvil

  • Peddinghaus Anvils are Drop-Forged and Produced Entirely from High Grade Steel for Maximum Durability.
  • The Top Face is Ground and Induction Hardened to Provide a Lively Surface to Work on.
  • Comes Equipped with a Pritchel Hole to Support the Use of Various Tools.
Check Stock

Digital Phase Indicator , Akozon SP8030 Digital Phase Rotation Indicator LED Buzzer Phase Sequence Meter 200 ith Bag

  • It is durable, reliable and light-weight handheld device, which is necessary tool for those who often install, repair or maintain three-phase system or motor..
  • Without a need to link testing line, the motor rotation direction can be decided by placing this indicator above the motor and aligning it with motor drive shaft..
  • Used to test phase sequence input of three-phase voltage, to indicate phase line L1, L2 and L3..
  • PM5900 Motor and Phase Rotation Indicator is used to test magnetic field direction of three-phase system, phase rotation, motor rotation direction..
  • It also supports non-contact type magnetic field rotation direction test (motor rotation direction test)..
Check Stock

Phase Sequence Meter, 60V ~ 600V AC 3 Phase Sequence Rotation Tester, with 5 LED Lights, for General Measuring Tool

  • It is durable, reliable and light-weight handheld device, which is necessary tool for those who often install, repair or maintain three-phase system or motor..
  • Used to test phase sequence input of three-phase voltage, to indicate phase line L1, L2 and L3..
  • PM5900 Motor and Phase Rotation Indicator is used to test magnetic field direction of three-phase system, phase rotation, motor rotation direction..
  • Without a need to link testing line, the motor rotation direction can be decided by placing this indicator above the motor and aligning it with motor drive shaft..
  • It also supports non-contact type magnetic field rotation direction test (motor rotation direction test)..
Check Stock

Siemens 3UG4631-1AW30 Monitoring Relay, Single Phase Voltage Monitoring, Screw Terminal, 1 CO Contacts, 0.1-60VAC/DC Measuring Range, 0.1-30V Hysteresis, 0-20s Delay Time, 24-240VAC/DC Auxiliary Voltage

  • 3 INDICATORS-The protector base adopts 35mm rail type or device type, and has two screw hole structures inside, which can be directly installed separately or HT35 rail. Indicated by three indicators: normal, phase loss(voltage three-phase unbalance), reverse phase.
  • PHASE LOSS PROTECTION-Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S.
  • REVERSE PHASE PROTECTION-Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action.
  • VOLTAGE IMBALANCE PROTECTION-Voltage imbalance protection, which refers to a protective measure that will affect the safe operation of the line due to three-phase voltage imbalance.
  • IDEAL FOR-Widely used in air compressors, electric motors, distribution boxes, water pumps, oil pumps, central air conditioning units, etc.
Check Stock

3-Phase Voltage Monitoring Relay AC 220-440V Phase Sequence Protection Small Size Protection for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Voltage Monitoring Relay Phase Sequence Protection TG30S Phase Sequence Relay 3-Phase Mini for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

General Tools EZ-Pro Jointer Clamp Kit #846

  • JOINT AND CLAMP KIT: These jointer clamps are an alternative to expensive jointers.
  • DEAD FLAT EDGES EVERYTIME: Just attach your crooked board to a piece of straight stock using the Jointer Clamps and run the stock along the rip fence....
  • GREAT WITH LONG STOCK: The Jointer Clamp works in two easy passes and is great for use with long stock..
  • PATENTED SWING ARM: Our patented swing arm design allows you to accurately rip wide boards with ease..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service.....
Check Stock

Taytools 114971 4 Inch Dust Collection Cyclone Separator Kit for Trash Cans Barrels or Custom Built Containers

  • Convert dust collector to two-stage unit with this dust separator kit.
  • Inlet and outlet ports accept a 4” dust collector hose.
  • Kit contains two elbows, two couplers, two hose clamps and all needed hardware.
  • Prevents debris from reaching the impeller and clogging the filter.
  • Perfect for use with Table, Saws, Jointers, Planers, Router Tables and much more.
Check Stock

6 inch 12 inch and 18 inch Anodized Aluminum Straight Edge Bars | Perfect for Checking Straightness On Metal Surface Tops Whet Stones Machinery and Can Be Used to Mark Or Scribe Lines

  • ...an see if your work surface has any gaps, pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working..
  • The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even..
  • The bars measure 3/8” thick by 1¾” tall which is just the right size to stand upright unsupported so you can free up both hands to make adjustments to your tools or table tops. Each of the included 6 inch, 12 inch and 18 inch straight edge bars have a .001" tolerance..
Check Stock

Voltage Monitoring Relay Protection 3-Phase AC 220-440V Small Size Phase Sequence Protection Phase Sequence Relay for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Fulton 24 Inch Long Anodized Aluminum Straight Edge Bar with .001 Tolerance | Perfect for Checking Straightness On Metal Surface Tops Whet Stones Machinery and Can Be Used to Mark Or Scribe Lines

  • ...an see if your work surface has any gaps, pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working..
  • The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even..
  • The bars measure 3/8” thick by 1¾” tall which is just the right size to stand upright unsupported so you can free up both hands to make adjustments to your tools or table tops. The Fulton Aluminum Straight edge is the perfect for any workshop where accuracy is a must!.
Check Stock