ReviewsPhosphor Copper Brazing Rod

Forney 48300 Bare Brass Gas Brazing Rod, 3/32-Inch-by-18-Inch, 10-Rods

• Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane torch set up.
• Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings.
• Melting point is 1620 degrees Fahrenheit.

Supplying Demand SW-ALCU5.5 5 Rod Pack Aluminum to Copper or Brass 8 Inch Brazing Rods Appliance Refrigeration HVAC

• Solution temperature during heat treating must be below the solidus of the braze alloy in order to ensure integrity of the joint is maintained..
• Joining all brazable grades of aluminum and copper.
• Aluminum to Aluminum or Aluminum to Copper wire pigtail splices.
• Aluminum to Copper, Aluminum to Brass or plated terminals.
• HVAC applications with Brass, Copper, Aluminum and Steel. Is effective with any of these heat sources: Oxy-acetylene torch, Natural gas torch, MAPP Gas, Induction..
• Quantity per pack: 5 | Rod Length: 8 inches | Shelf Life: 2 years at ambient temp. | Density (Lbs/in³): 0.19 | Recommended Brazing Temp.: 950-1000°F (510-537°C) | Liquidus: 905°F (471°C) | Solidus: 826°F (441°C) | Appearance: Silver-Colored with White Flux Channel.
• Supplying Demand replacement parts are compatible with Major Brands, but you should always verify compatibility with your specific application..

MTF-5 Cap'n Hook 5-Flame Tip

• Five flames with 100% wrap around heat for easy brazing of copper tubing..
• Capable of brazing up to 1" copper tubing..
• Hook tip made of tough, durable stainless steel to protect against bending.
• Proudly made in the USA and 100% flame tested..
• Fits Uniweld's welding handles Part# 71 or Part# WH550.

Lucas-Milhaupt 99088 Flux Cored Aluminum 822

Heyiarbeit 2mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 400mm 15.75 Inch 10pcs

• 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
• 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
• 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
• 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.

Heyiarbeit 1.5mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 200mm 7.87 Inch 5pcs

• 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
• 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
• 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
• 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.

Amprobe TH-3 Relative Humidity Temperature Meter 2 Display

• Air/Acetylene Soft Flame Kit has always been the Old Reliable flame tool for plumbers.
• Produces a precise 2700 Degrees Fahrenheit target heat for soldering and brazing copper tubing.
• Capable of soldering up to 1/2 inch and brazing up to 3/8 inch copper tubing with supplied tip.
• Torch Handle with rear control valve for accurate gas control and positive shutoff.
• Acetylene Regulator for MC Tank with protective rubber gauge boot.

K-T Industries 2-2750 Brazing Flux, 0.5 lb

• Price For: Each Tensile Strength (PSI): - Type: - Contents: 56% Silver, 22% Copper, 17% Zinc, 5% Tin Container: - Application: For Ferrous and Non Ferrous Alloys Good for Stainless Steel Includes: 1 oz Brazing Wire and 1.75 oz White Flux Item: Brazing Kit Material: Safety-Silv-56 Dia. (In.): 1/16 Length (In.): - Brazing Range (F): 1145 to 1205 Standards: AWS A5.8, Bag-7, NSF 51.
• Country of Origin (subject to change): United States.

Witonics Capacitor Replacement Kit for Hyundai X93W with Soldering Tools

• Professional contractor grade oxyacetylene welding and brazing outfit.
• Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
• Single stage Patriot series regulators with protective rubber gauge boots.
• Front valve welding handle with stainless steel ball point valves for accurate gas control.
• Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.

RBCuZn-C - LFB Bare Bronze Brazing Rod - 36 x 1/8 1 Lb

• LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F).
• A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added.
• galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service.
• READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
• Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4".
• Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb.

25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″

• MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
• ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
• PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
• APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
• crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
• SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....