ReviewsPhoton Dlp 3d Printer

Youyoute Mini Heater for 3D Printer, Resin 3D Printer Temperature Controller Heating Thermostat Temp Control for LCD DLP 3D Printers

【Use for】Resin 3D printer mini heater designed for Resin 3D printers, it is small but powerful, for use in cold weather. It helps you to heat up the resin and rise the ambient temperature. Make your 3D printer work well, save your time and Resin material..
【Professional design】Our temperature controller use in cold weather,when temperature lower than 75F/24C, will cause so many problems in LCD DLP 3D print. Such as Print not sticking to the bed, Layer adhesion, warming, and so on. Finally, printing fails..
【Professional design】Our 3D printer heater built in high-precision temperature sensor, accurate to 0.1 ℃. Fireproof case, high-quality power cord, all professionally designed for your safe printing..
【Small size】Our 3D printer Thermostat 10.8x5.7x3.2cm/4.25x5.24x1.25 in, 117grams, Prefect for 8-15 inch Resin 3D printer, It only takes 10 minutes from 40F to 80F, for use in cold weather..
【Function】3D printer air controller contains three functions, one is heating, one is Air circulation, and the other is filtering. When the temperature is lower than the set t....

Check Stock

Geeetech Newest Upgraded 2 in 1 Wash and Cure Station for LCD/DLP/SLA 3D Printed Models 3D Printer UV Resin Curing Box with Rotary Curing Turntable and Washing Bucket,GCWO2

...splashing liquid. With an intelligent detection sensor, picking up the cover in the operating state will suspend operation auomaticly and emit a beeping sound，and will resume working once the hood is covered back..
【Ideal Compatity 】Compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, ANYCUBIC Photon, QIDI Shadow, NOVA3D, and other regular resin printers with similar build volume size as it does for photon series, which provides you an ideal support for your 3D resin prints..

Check Stock

Official Creality LD-002H Resin 3D Printer Creality Resin Printer with 6.08 Inch 2K Monochrome LCD Advanced Light Source High Precision Air Filtration System Large Printing Size 5.12x3.23x6.3inch

FAST PRINTING AND LONGER LIFESPAN - Creality LD002H 3d resin printer uses a 6 inch monochrome LCD of 2K HD with 2560x1620 resolution, only taking....
ULTRA ACCURCY PRINTING - This resin printer equipped with a UV integrated light source module and upgraded transmission system, working together with....
AIR FILTRATION SYSTEM WITH ACTIVATED CARBON - The SLA 3d printer is built in air filtering system. There is a small box at the rear of the print....
CHITUBOX SLICING SOFTWARE - This lcd 3d printer installs the latest version of CHITU BOX Slicing Software, which supports one-key to add the model....
BETTER USER EXPERIENCE - LD002H dlp 3d printer adpots user-friendly 3.5 inch full-color touch screen UI design interface can monitor real-time....

Check Stock

Official Creality LD-002H Resin 3D Printer – 3D Resin Printer with 6.08” Monochrome 2K LCD Screen - Advanced Light Source High Precision Air Filtration System - 5.12” x 3.23” x 6.3” Printing Size

CREALITY RESIN PRINTER: This Official Creality Resin 3D Printer features a 6” Monochrome 2K HD LCD with 2560 x 1620 resolution. With the 2K Mono....
FAST, DETAILED RESIN PRINTS: The LD-002H only takes 1-4 seconds per layer to cure resin. This can increase your printing efficiency and save time.....
AIR FILTRATION SYSTEM: The Creality SLA printer has a built-in air filtering system. The small box at the rear of the print chamber contains pouch of....
SLICING SOFTWARE: This LCD 3D printer features the latest version of CHITU BOX Slicing Software. The software requires only one key to add the model....
EASY-TO-USE RESIN PRINTER: The DLP 3D Printer is designed with a large, 3.5” full-color touch screen. The screen allows you to monitor real-time....

Check Stock

eDimensional KIDS Rechargeable 3D Glasses compatible with SAMSUNG 2011-16 Bluetooth 3D TV’s

【Quick compatibility with DLP-LINK projector】 The Active Shutter 3D Glasses use "DLP Link" as their sync method, quickly works with all DLP Link projectors, Compatible with Optoma/BenQ/Acer/Vivitek/Panasonic/Dell/Viewsonic/LG/Samsung/Mitsubishi dlp-link projectors. (Note: Can't Compatible with Epson, Sony Projectors, also can't work with TVs).
【Outstanding Features】 Our DLP link 3D glasses adopt the newest active shutter technology, super-fast 144Hz refresh rate, High definition, no ghosting images, no flickering, and deliver a great 3D viewing experience for you!.
【Left/Right Eye Rotation】 If you have our 3D Active Glasses on and don't see the effect of 3D, just need to single-click the "Power Button" again to flip the left and right eye views for synchronizing.
very convenient, no need to operate the DLP projector..
【Long Lasting Battery】 The active 3d DLP glasses come with a built-in high capacity rechargeable battery, continuous working 45 hours after fully charged with USB, standby time 180 days.
Auto 5 seconds Stand by and 5 minutes Shut Off, save energy and stable..
【Lightweight & Comfortable】 JX-30 active shutter DLP-Link 3d glasses is lightweight and portable to take, also can be worn very comfortably in front of regular glas....

Check Stock

ANYCUBIC 3D Printer Resin with Low Odor and Safety 405nm UV Plant-Based Rapid Resin with High Precision and Quick Curing for LCD 3D Printing Grey 1000g

Safer and ultralow odor : Made from soybean oil, No VOCs, no BPA, no harmful chemicals. Complied with EN 71-3:2013 safety standard.
Easy to Use & Stunning Colors ：high precision and quick curing for LCD 3d printing and high quality pigments provide stunning colors in our range of....
Fast curing & Exposure Time: Optimized curing time for Anycubic Photon, offering better printing quality. Bottom layer exposure: 50-60s.
Wide compatibility: Sensitive to 355nm~405nm UV light. Compatible with most LCD/DLP 3D printers.
Attention & Storage : When printing large model, please increase the build plate contact of the model or lower the infill density to avoid wrapping.....

Check Stock

3D Red/Cyan Pro-Ana (TM) Anaglyph Cardboard Glasses - 100 Pair Folded - White Frame

【Quick compatibility with DLP-LINK projector】: The Active Shutter 3D Glasses use "DLP Link" as their sync method, quickly works with all DLP Link projectors, Compatible with Optoma/BenQ/Acer/Vivitek/Panasonic/Dell/Viewsonic/LG/Samsung/Mitsubishi dlp-link projectors. (Note: Can't Compatible with Epson, Sony Projectors, also can't work with TVs).
【Outstanding Features】 : JX-30 dlp link 3d glasses adopts the newest active shutter technology, super fast 144Hz refresh rate, High definition, no ghosting images, no flickering, delivers a great 3D viewing experience for you !.
【Left/Right Eye Rotation】: If you have our 3D Active Glasses on and don't see the effect of 3D, just need to single clicking the "Power Button" again to flip the left and right eye views for synchronizing.
very convenient, no need to operate the dlp projector..
【Long Lasting Battery】 : The active 3d dlp glasses comes with built-in high capacity rechargeable battery, continuous working 45 hours after fully charged with USB , standby time 180 days.
Auto 5 seconds Stand by and 5 minutes Shut Off, save energy and stable..
【Lightweight & Comfortable】: JX-30 active shutter DLP-Link 3d glasses is lightweight and portable to take, also can be worn very comfortably in front of r....

Check Stock

Enchroma Color Blind Glasses - Tilden - Color Correcting & Enhancing Glasses Outdoor Use for Protan Color Blindness, Matte Black

【Quick compatibility with DLP-LINK projector】 The Active Shutter 3D Glasses use "DLP Link" as their sync method, quickly works with all DLP Link projectors, Compatible with Optoma/BenQ/Acer/Vivitek/Panasonic/Dell/Viewsonic/LG/Samsung/Mitsubishi dlp-link projectors. (Note: Can't Compatible with Epson, Sony Projectors, also can't work with TVs).
【Left/Right Eye Rotation】 If you have our 3D Active Glasses on and don't see the effect of 3D, just need to single clicking the "Power Button" again to flip the left and right eye views for synchronizing.
very convenient, no need to operate the dlp projector..
【Outstanding Features】 Our dlp link 3d glasses adopts the newest active shutter technology, super fast 144Hz refresh rate, High definition, no ghosting images, no flickering, delivers a great 3D viewing experience for you !.
【Long Lasting Battery】 The active 3d dlp glasses comes with built-in high capacity rechargeable battery, continuous working 45 hours after fully charged with USB , standby time 180 days.
Auto 5 seconds Stand by and 5 minutes Shut Off, save energy and stable..
【Lightweight and Comfortable】 JX-30 active shutter DLP-Link 3d glasses is lightweight and portable to take, also can be worn very comfortably in front of regular ....

Check Stock

KRISMYA 3D Glasses for Movies,10 Pairs 3D Glasses Red and Cyan White Frame Anaglyph Cardboard - Folded in Protective Sleeve

【Quick compatibility with DLP-LINK projector】 The Active Shutter 3D Glasses use "DLP Link" as their sync method, quickly works with all DLP Link projectors, Compatible with Optoma/BenQ/Acer/Vivitek/Panasonic/Dell/Viewsonic/LG/Samsung/Mitsubishi dlp-link projectors. (Note: Can't Compatible with Epson, Sony Projectors, also can't work with TVs).
【Left/Right Eye Rotation】 If you have our 3D Active Glasses on and don't see the effect of 3D, just need to single clicking the "Power Button" again to flip the left and right eye views for synchronizing.
very convenient, no need to operate the dlp projector..
【Outstanding Features】 Our dlp link 3d glasses adopts the newest active shutter technology, super fast 144Hz refresh rate, High definition, no ghosting images, no flickering, delivers a great 3D viewing experience for you !.
【Long Lasting Battery】 The active 3d dlp glasses comes with built-in high capacity rechargeable battery, continuous working 45 hours after fully charged with USB , standby time 180 days.
Auto 5 seconds Stand by and 5 minutes Shut Off, save energy and stable..
【Lightweight and Comfortable】 JX-30 active shutter DLP-Link 3d glasses is lightweight and portable to take, also can be worn very comfortably in front of regular ....

Check Stock

5PCS FEP Film Release Film for ELEGOO Mars/ANYCUBIC Photon/Photon S/HALOT-ONE LCD SLA DLP 3D Printer, 200 x 140 x 0.15mm

【Compability】Suitable for all desktop LCD/SLA 3D Printer which print size no more than 200 x 140mm, such as ELEGOO Mars, AnyCubic Photon/Photon S, Creality LD-001..
Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
【Excellent Ductility】Excellent elongation performance, ductility up to 300%, good flexibility, bending 10000 times..

Check Stock

DLP 3D Glasses, 144Hz Rechargeable DLP-Link 3D Active Shutter Glasses for All 3D DLP Projectors, Compatible with Optoma, Samsung, BenQ, Dell, Mitsubishi, Acer, Vivitek, NEC, Sharp (Black-4Pack)

【Quick compatibility with DLP-LINK projector】 The Active Shutter 3D Glasses use "DLP Link" as their sync method, quickly works with all DLP Link projectors, Compatible with Optoma/BenQ/Acer/Vivitek/Panasonic/Dell/Viewsonic/LG/Samsung/Mitsubishi dlp-link projectors. (Note: Can't Compatible with Epson, Sony Projectors, also can't work with TVs).
【Outstanding Features】 Our dlp link 3d glasses adopts the newest active shutter technology, super fast 144Hz refresh rate, High definition, no ghosting images, no flickering, delivers a great 3D viewing experience for you !.
【Left/Right Eye Rotation】 If you have our 3D Active Glasses on and don't see the effect of 3D, just need to single clicking the "Power Button" again to flip the left and right eye views for synchronizing.
very convenient, no need to operate the dlp projector..
【Long Lasting Battery】 The active 3d dlp glasses comes with built-in high capacity rechargeable battery, continuous working 45 hours after fully charged with USB , standby time 180 days.
Auto 5 seconds Stand by and 5 minutes Shut Off, save energy and stable..
【Lightweight & Comfortable】 JX-30 active shutter DLP-Link 3d glasses is lightweight and portable to take, also can be worn very comfortably in front of regular gl....

Check Stock