ReviewsPi Cup Benefits

Ultra-Small RPi Pinout Terminal Block Breakout Board Module for Raspberry Pi

  • The item has been soldered and assembled. Support for Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W..
Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

  • ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODE....
Check Stock

Smraza Case for Raspberry Pi 4 Model B, Acrylic Case with Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4B (RPI 4 Board Not Included) - Black and Clear

  • NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: This case is not suitable for raspberry pi 3..
  • EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
  • KEEP RASPBERRY PI 4 B COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
  • CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
  • 100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
Check Stock

DIN Rail Mount Bracket for Raspberry Pi A+ B+ 2B 3B 3B+ 4B Zero Arduino Uno Mega Mkr BeagleBone

  • This product can easily mount Raspberry Pi / Arduino / BeagleBone to DIN rail, expand their range of applications to industrial control..
  • Supports Raspberry Pi 1 Model A+ / Pi 1 Model B+ / Pi 2 Model B / Pi 3 Model B / Pi 3 Model B+ / Pi 4 Module B / Pi Zero / Pi Zero W, Arduino Uno R2 /....
  • High quality DIN rail feed and mounting very stable, can support width 35mm / 32mm / 15mm DIN rail. Support horizontal and side installation. The....
  • Thickness 1.5mm/0.06" aluminum bracket sheet, the weight is very light and very strong..
  • Package included: 1x Aluminum bracket, 1 pair DIN rail adapter feed and mount screws, 6x M2.5x10mm standoffs, 12x M2.5x6 pan head screws, 4x M2x12mm....
Check Stock

kuman RPi GPIO Breakout Expansion Board + Ribbon Cable + Assembled T Type GPIO Adapter 20cm FC40 40pin Flat Ribbon Cable for Raspberry Pi 3 2 Model B & B+ SC05

  • Assembled RPI GPIO with 8" 40 pin ribbon cable for Raspberry Pi 3B, Raspberry Pi 2 model B, Raspberry Pi 1B+, Raspberry Pi 1a+, Raspberry Pi zero w, Raspberry Pi zero.
  • 40 pins are labeled for easy prototyping.
  • Gpio adapter plus for Raspberry Pi B+, Raspberry Pi 2, Raspberry Pi is not included.
Check Stock

NulSom Inc. 40p to 40p GPIO Ribbon Cable for Raspberry Pi 4/3 / Zero / 2 (8" 20cm)

  • 4 layer Raspberry Pi 3 B+ Case - Specially designed for the 2018 new version Raspberry Pi 3 Model b+, and compatible with Pi 3B 2B (Not include Pi Board).
  • Fans & Heatsinks Cooling - With DC 5V quiet fan and a set of Aluminum heatsinks to keep raspberry pi cool..
  • Easy to access to all GPIO ports - 4 layers Acrylic case allow you use all ports of pi and won't block signal and perfectly protect your pi components..
  • Convenient to turn on/off pi - Power Cable w/ on off switch button, easy to press button to power on your pi..
  • Easy to install with Instruction manual. Package include: 4 layer dark brown Case, 4pcs rubber feet, 3pcs Aluminum Heatsinks, 1pc Power Supply Adapter(5V/2.5A , Cord length: 59 inch), 1pc Mini Fan and 1pc Phillips Screwdriver..
Check Stock

LoveRPi Ultra Wide Angle Camera for Raspberry Pi 4/3/2/Zero W (5MP, 220 FOV)

  • ULTRA WIDE ANGLE 220* CAMERA FOR RASPBERRY PI: Record crystal clear 1080P videos and capture 2592 by 1944 photos with our high performing camera for the Raspberry Pi board family. Equiped with large 1.4 by 1.4 micron sensor pixels, this module is designed for ultra wide angle, low latency, and high quality imaging required for computer vision, streaming media, and remote data acquisition..
  • INTEGRATED IR FILTER: Infrared light is invisible to the naked eye but will cause hue changes to CMOS camera sensors. The integrated filter prevents infrared light from distorting the image hue resulting in color accurate imagery for daytime outdoor applications..
  • AUTOMATIC IMAGE CONTROLS: This module will intelligently adjust white balance, exposure, sensitivity, black levels to optimize for best image quality. Additionally, it has built-in 50Hz/60Hz anti-flickering, lens correction, and defective pixel cancelling functions..
  • SIMPLE INSTALLATION FOR ALL PI MODELS: Two FPC cables of different length for Raspberry Pi 4, Pi 3, Pi 2, Pi B+ are included. PFC cable adapter for Raspberry Pi Zero, Pi Zero W, and Pi 0WH are also included. Open a terminal, type in "sudo raspi-config.
Check Stock

[5V 3A 15W] Raspberry Pi 3 Case, iUniker Pi 3 b+ Case, Raspberry Pi 3 Power Supply with Switch Raspberry Pi Power Supply (UL Listed)

  • Our Raspberry Pi 3 Case is Specially designed for Raspberry pi 3 B / 3 B+, and perfect compatible with Raspberry Pi 3 B / 3 B+ / 2B. Assembly easy for beginners and children..
  • New Raspberry pi 3 case with a Silence DC 5V cooling fan and 3 pcs Aluminum heatsinks, double cooling system keep your Raspberry pi 3 B+ cool quickly even the CPU under high load..
  • Our Power Supply Compatible only with the Raspberry Pi 2, Pi 3 and Pi 3 B+. NOT Compatible with Raspberry Pi 4.
  • Micro USB plug and UL Listed, Output: 5V DC / 3A Regulated Input: 100 - 240V AC.
  • We support lifetime technical support and free return and exchange service for each customers..
Check Stock

Treedix RPi GPIO Terminal Block Breakout Board Module Expansion Board Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W

  • Easy to operate: Use this module to easily extend the Raspberry pi Zero project to the Internet of Things or industrial control applications.
  • There is a mark on the breakout board that can clearly identify the pin position, Breakout board is of excellent quality and adopts double-sided gold forming process.
  • The module is small in size and does not occupy other space. It is very convenient when making DIY circuits, and the wires can be easily inserted into the terminals.
  • Compatible with Raspberry Pi: This GPIO terminal block is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W.
  • Note: This project needs to be welded and assembled by yourself.
Check Stock

SmartiPi Touch Pro - Case for The Official Raspberry Pi 7 Touchscreen Display - with Cooling Fan

  • Works with the Official 7" Raspberry Pi display and Raspberry Pi B+,2B,3B,3A+,3B+, and 4.
  • Includes a cooling fan with rubber vibration mounts.
  • Works with Raspberry Pi HAT boards and has secondary mounting points for your own development board.
  • Raspberry Pi, Raspberry Pi camera, and Raspberry Pi display not included.
  • Port blocking part to cover the Raspberry Pi ports included.
Check Stock

Stash Premium Green Tea, 20 Tea Bags Per Box

  • MAKE IT A DOUBLE: We've married the exquisite organic Japanese matcha powder with fine, organic green leaf tea. The pleasant taste and health benefits make this tea a favorite for many tea-lovers..
  • PREMIUM AND ORGANIC: This light and crisp infusion is clean, smooth and refreshing. Pour yourself a well-balanced cup that's brimming with benefits and conveniently packed in a round, natural tea bag..
  • ​​STEEPING INSTRUCTIONS: Simply heat fresh, filtered water to just short of boiling. Then pour 6 oz water over tea and steep for 1-3 minutes..
  • CAFFEINE: Green tea contains less than a quarter the amount of caffeine per cup than in a similar-sized cup of coffee.
  • enjoy this brew without the coffee-like jitters..
  • GLUTEN/SUGAR-FREE: This tea connoisseur's hot tea is gluten-free, sugar-free and carb-free..
Check Stock