ReviewsPicatinny Mount Scope

Monstrum Precision V2 Picatinny Scope Rings | 30 mm Diameter | 0.85 inch Height

  • 0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

ApexHorizon Scope Rings Optic Mounts - Titanium Alloy Scope Rings 30mm for Picatinny Rail, Tactical Heavy Recoil Rifle Scope Rings Precision Mounts Rings (Scope Rings 30mm Mount)

  • Titanium Alloy Scope Rings: Made of titanium alloy and precision-machined aircraft-grade 6061 aluminum alloy. Titanium alloy mounting part is high solidity, shockproof, anti-shake, anti-corrosion, and wear resistance. A reliable material to make sure your scope is precisely and firmly mounted on Picatinny rail..
  • 30mm & Medium Profile: Set of 2 scope rings are both 1.18 inch/30mm diameter. 40in/Ibs ring torque, 2 screws for rail clamping, and 4 screws on top to ensure your rifle scope reaches alignment. Mount on rail easily, stay aligned, and without any wobble. Removed or installed quickly by using Allen key..
  • Rings for Picatinny Rail: The optic rings fit for standard Picatinny rail. The recoil control key holds the scope rings perfectly still and will not shift or move under fierce recoil. By utilizing titanium alloy on the clamping base, the scope rings achieve a way longer service life than similar scope rings and work perfectly under extreme environments..
  • Professional Choice: The scope mount rings are heavy duty style yet lightweight so that it withstands heavy recoil and does not add up extra weight. Each ring is about 81g. Perfect for outdoor hunting, tactical and precision target practice..
  • 2-Piece Scope Rings Design: Different rifle scope has a ....
Check Stock

U.S. Rifles, Cal. .30, M1903, M1903A1, M1903A3 and M1903A4: TM 9-1270 Ordnance Maintenance

  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms with integrated level bubble. Comes with both #6 and #8 screws for compatibility with both older and newer Savage Axis models..
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Integrated level bubble built into the rear of the rail to check for consistent vertical alignment of your rifle.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Montrum 90 Degree Offset Picatinny Rail Mount

  • For 90 degree offset attachment of picatinny optics or accessories to Picatinnny mounting platforms.
  • 90 degree offset design allows for the mounting of a secondary sighting system or for more flexibility in accessory placement.
  • Picatinny rail section is 4 slots in length and will accommodate all standard Picatinny accessories, red dots, or optics.
  • Mount a magnification scope up top for medium range shooting and a red dot at a 90 degree angle for close quarter combat. Or mount your flashlight to....
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

Sparwod Rifle Scope Rings Mount Heavy Duty Medium Profile Tactical Scope Weaver for 20 mm Picatinny/Weaver Rail (1 Inch, Set of 2)

  • ▶ High quality, precision machining of aircraft grade 6061 aluminum alloy black matte anodizing finish.
  • ▶ The scope mount ring for picatinny/ weaver rail (20mm). See-through style have more open sights.
  • ▶ Built-in tape design to prevent the ring from sliding and holding postion accurately..
  • ▶ Base is compatible with picatinny mounting systems also compatible with weaver mounts.
  • ▶ Medium profile, scope mount ring include 4 scope clamp screws, 2 rail clamp screws.
Check Stock

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Long Action | 20 MOA

  • Picatinny rail mount built specifically for Long Action Remington 700 rifle platforms.
  • Compatible with Long Action Remington 700 models only including: 270 Winchester | 300 Win Mag | 30-06 Springfield | 25-06 Remington | 338 Lapua.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Long Action | 0 MOA

  • Picatinny rail mount built specifically for Long Action Remington 700 rifle platforms.
  • Compatible with Long Action Remington 700 models only including: 270 Winchester | 300 Win Mag | 30-06 Springfield | 25-06 Remington | 338 Lapua.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Athlon Optics Precision 34mm MSR Ring, Black (701007)

  • Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'').
  • With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Monstrum 45 Degree Offset Picatinny Rail Mount

  • For 45 degree offset attachment of picatinny optics or accessories to Picatinnny mounting platforms.
  • 45 degree offset design allows for the mounting of a secondary sighting system or for more flexibility in accessory placement.
  • Picatinny rail section is 4 slots in length and will accommodate all standard Picatinny accessories, red dots, or optics.
  • Mount a magnification scope up top for medium range shooting and a red dot at a 45 degree angle for close quarter combat. Or mount your flashlight to the side without your front grip obstructing the flashlight beam..
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

Low Profile Scope Rings 1 inch – Rifle Scope Rings Scope Mounting Rings 1 Inch for Picatinny and Weaver Rails(2 Pieces)

  • The double tactical low profile scope mount fit for 1 inch / 25.4mm scope tube on the picatinny/weaver rails..
  • The height from the center of the riflescope tube to the picatinny base is 0.74 inches (18.7 mm)..
  • With mountings screws on the base and four screws on each side of the two scope rings. It will hold the riflescope mount securely..
  • Precision machined from aluminum alloy with anodized black matte finish. Light weight, only 2.46oz/70g..
  • Easy to install. Note: the rings have a star nut for installation rather than a hex nut and the tool is included..
Check Stock

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Short Action | 0 MOA

  • Picatinny rail mount built specifically for Short Action Remington 700 rifle platforms.
  • Compatible with Short Action Remington 700 models only including: 223 Remington | 243 Winchester | 308 Winchester | 6.5 Creedmoor | 7 mm Remington Mag | 7 mm-08 Remington | 257 Weatherby Mag | 270 WSM | 22-250 Remington |300 Remington Ultra Mag | 300 AAC Blackout | 220 Swift.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock