ReviewsPicatinny Rings On Weaver Base

Monstrum Precision V2 Picatinny Scope Rings with Integrated Level Bubble | 30 mm Diameter | High Profile

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Offset Rail Mounts LONSEL 4 Slots Aluminum 45 Degree Offset Angle Picatinny Weaver Rail Mount for Flashlight Laser Optic Sight - 3 Pack 4 Slot - 3 PCS

  • ❖【45 Degree Offset Picatinny Rail Mount】Super Lightweight Rails, Low Profile Design. Allows the Attachment of Lasers, Flashlights, Red Dot....
  • ❖【Fits 21mm Picatinny Weaver Rail System】The Rail Mount Base Fits On Standard 21mm Picatinny or Weaver Style Rail, Ensure Mounting Tactical....
  • ❖【Offset 4 Slots Picatinny Rails】With 4 Slots Picatinny Rail, Allowing You Quickly Add On Any Standard Picatinny or Weaver Accessories, Such As....
  • ❖【Solid & Durable】Precision Machining of High Grade 6061 Aluminum Alloy + High Tensile Steel In Black Matte Anodizing Finish, Durable &....
  • ❖【Quick Release & Easy To Install】Simple Side Screw Structure, It Secures and Detaches Quickly with Single Thumb Tightening, Easy and Quick To....
Check Stock

Vortex Optics Hunter 30mm Riflescope Rings - Medium Height (0.94 inches)

  • These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.94 inches (24.0 mm) from the base.
  • Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.
  • Made from aircraft-grade 6061-T6 aluminum for optimum strength.
Check Stock

Vortex Optics Hunter 1-inch Riflescope Rings - Low Height (0.63 in)

  • These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.63 inches (16.0 mm) from the base..
  • Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups..
  • Made from aircraft-grade 6061-T6 aluminum for optimum strength..
Check Stock

Vortex Optics Hunter 30mm Riflescope Rings - High Height (1.22 in)

  • These Vortex Hunter Rings position the center of the riflescope tube at a height of 1.22 inches (31.0 mm) from the base..
  • Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups..
  • Made from aircraft-grade 6061-T6 aluminum for optimum strength.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings | 34 mm Diameter | 1.40 inch Height

  • 1.35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • 34 mm diameter rings for mounting standard 34 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings | 34 mm Diameter | 1.00 inch Height

  • 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • 34 mm diameter rings for mounting standard 34 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings | 30 mm Diameter | 0.85 inch Height

  • 0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Vortex Optics Hunter 1-inch Riflescope Rings - High Height (1.22 in), Matte Black

  • These Vortex Hunter Rings position the center of the riflescope tube at a height of 1.22 inches (31.0 mm) from the base..
  • Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups..
  • Made from aircraft-grade 6061-T6 aluminum for optimum strength..
Check Stock

Burris 420162 XTR Rings (30-mm, Medium, Black)

  • Fits on any Weaver or Picatinny-style mount.
  • Ideal for tactical use/Also great for hunting rifles, slug guns, and muzzleloaders.
  • Optional Picatinny rail on top of ring allows for attachment of accessories on top of a mounted scope.
Check Stock

Talley Lightweight Alloy X-Bolt 1in Low Hells Canyon Scope Rings (HC930735), Multi

  • Distinctive offset reversible design allows for added flexibility for scope placement and optimum eye relief. The rings extend forward 1.5 inch from the base and can be mounted in either direction dependent on your preferred scope placement and your mounting system..
  • Mounts to any standard Picatinny rail mounting platform | Not compatible with Weaver bases.
  • High profile in height, 0.8 inches from base of mount to bottom of rings.
  • Available in 1 inch diameter and 30 mm diameter sizes.
  • All Monstrum Tactical mount and accessory products are covered by a lifetime guarantee.
Check Stock