ReviewsPilot Drill Bit

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • ...ck change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set Maximum Torque. Packaging set combination unique design protected by US Copyright Office.
  • Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 drill bit replacement set. Countersink replacement bits set with tapered drill bits. Top Quality 11/64 inch tapered and double flute drill bit.
  • HSS M2 Grade 6542 the most popular High-Speed Steel, for its high toughness, and good cutting edge retention. FTG 2345P countersink replacement drill bit set for drill bits with countersink.
  • STORAGE CONTAINERS for this set available below, at section " Make it a bundle". Replacement counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG U....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...it For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

Chicago Latrobe 790 Solid Carbide Spotting Drill Bit Regular Length Uncoated Bright Finish Round Shank Right-Hand Spiral Flute 120 Degree Conventional Point 1/4 Size

  • Spotting drill bit creates a pilot hole to reduce walking and improve hole accuracy.
  • Solid carbide drills produce close-tolerance holes in hard materials, and have a longer tool life at higher speeds than cobalt and high-speed steel (HSS).
  • Uncoated (bright) finish has no additional surface treatment or coating.
  • 120-degree conventional point drills a pilot hole to accurately guide a 118-degree secondary drill bit.
  • Round shank accommodates most drill chucks.
Check Stock

Yakamoz 5Pcs Taper Drill Countersink Set 1/4 Hex Shank Countersinks with Tapered Point Pilot Drill Bits for Woodworking

  • Quick change 1/4" hex shank for power drill, 7/64", 9/64", 11/64", 3/16", 7/32" HSS taper drill bits ideal for installing screws..
  • Use these countersinks to drill the pilot hole and countersink hole in one step..
  • 4-Flute cutter countersink and tapered drill bit provide superior speed and ideal finish..
  • Adjustable countersink along taper drill to get proper pilot hole depth for different length screws..
  • Made of High Speed Steel (HSS) drill bits with alloy steel countersinks, good cutting performance on hardwoods and composites and long life use..
Check Stock

Patioer Hole Cutter, 1-5/8" to 8" (40-200mm) Adjustable Hole Saw Cutter, with ABS Dust Shield for Recessed Lights, Ceiling Speakers, Vent Holes

  • Adjustable Hole Saw Cutter: This kit includes 1x adjustable hole saw with two replaceable pilot drill bits (1 x auger type self-feed pilot bit +1x HSS pilot bit), 2x high speed cutting blades,1x ABS dust shield, 1x adjustment hex wrench, 5x brad-point wood drill bits and 5x Masonry drill bits, 1x carpenter pencil, 1x 3m tape measure and 1x durable storage case..
  • Size Adjustable: Twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • Application: It can be used to cut plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc. A practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners..
  • Easy To Carry: The hole saw cutter comes with a sturdy carry case for easy storage and organize. Easy and convenient to carry. Improve work efficiency..
Check Stock

wesleydrill 1' Reduced-Shank Drill Bit 1/2 Inch Shank Silver and Deming Industrial Drill Bit Fit for Home DIY and General Building/Engineering/Woodworking

  • [Specifications and Packaging]: 1 Pc reduced-shank drill bit and 1 pc plastic tube.Include Size:1″..
  • [Fitment]: Hss drill bit set for metal/ wood/ plastic. Suitable for home DIY, and general building/engineering/woodworking use..
  • [Material]: Metal drill bit used high speed steel M2 black and gold, resists corrosion, ensures outstanding durability, sharpness and capability, reduces the friction and runs cooler..
  • [Advantage]: Industrial drill bit Increases cutting speed with self-centering and prevents walking, clears chips and particles faster. The split point tip can increase the wear resistance..
  • [Special Design 135-Degree]: Cobalt drill bit 135-degree penetrates hard material without a pilot hole and produces small chips to reduce clogging..
Check Stock

wesleydrill 11/16\ Reduced-Shank Drill Bit 1/2 Inch Shank Silver and Deming Industrial Drill Bit Fit for Home DIY and General Building/Engineering/Woodworking

  • [Specifications and packaging]: 1 Pc reduced-shank drill bit and 1 pc plastic tube.Include Size:11/16"..
  • [Fitment]: Hss drill bit set for metal/ wood/ plastic. Suitable for home DIY, and general building/engineering/woodworking use..
  • [Material]: Metal drill bit used high speed steel M2 black and gold, resists corrosion, ensures outstanding durability, sharpness and capability, reduces the friction and runs cooler..
  • [Advantage]: Industrial drill bit increases cutting speed with self-centering and prevents walking, clears chips and particles faster. The split point tip can increase the wear resistance..
  • [Special Design 135-Degree]: Cobalt drill bit 135-degree penetrates hard material without a pilot hole and produces small chips to reduce clogging..
Check Stock

wesleydrill 9/16\ Reduced-Shank Drill Bit 1/2 Inch Shank Silver and Deming Industrial Drill Bit Fit for Home DIY and General Building/Engineering/Woodworking

  • [Specifications and Packaging]: 1 Pc reduced-shank drill bit and 1 pc plastic tube.Include Size:9/16"..
  • [Fitment]: Hss drill bit set for metal/ wood/ plastic.Suitable for home DIY, and general building/engineering/woodworking use..
  • [Material]: Metal drill bit is made of high speed steel M2 black and gold, resists corrosion, ensures outstanding durability, sharpness and capability, reduces the friction and runs cooler..
  • [Advantage]: Industrial drill bit Increases cutting speed with self-centering and prevents walking, clears chips and particles faster. The split point tip can increase the wear resistance..
  • [Special Design 135-Degree]: Cobalt drill bit 135-degree penetrates hard material without a pilot hole and produces small chips to reduce clogging..
Check Stock

JIECHENG 6 inch Hole Saw for Cornhole Boards,Metal,Drywall,Plasterboard,Wood and Plywood

  • High grade hole saw 6 inch with 3/8'' Hex shank Mandrel,the cutting depth is about 1.24 inch (32mm),it can make 6 inch diamteter holes..
  • Heavy duty for making Cornhole Boards,air ducts,ceiling light,speakers,duct work,it can drill in drywall,wood ,plastic, gypsum board,aluminium,soft thin metal and rubber. very useful for Interior decoration, DIY tools, downlight installation.
  • Good material:High Speed Steel M42 Bi-metal. with sharp teeth,cut the wood very easy and non binding clean edge..
  • Notice: Please keep safe when operate the drilling work. it is better firstly slow speed,then higher. wear safety glasses it important for safe of eyes. and big hole should be low rotation speed..
  • Rich configuration,Include 1pcs bimetal hole saw 6 inch,1pcs mandrel with pilot drill bit,1pcs extra pilot drill bit,1pcs wrench,1pcs spring..
  • This item is mainly for all kinds of woods and soft material, but not for thick steel plate..
  • The shank of arbor is hex,3/8"(9.5mm),it is distance between two sides. so it is for 10mm (3/8") drill chuck or larger chuck..
Check Stock

DEWALT Drill Bit, Pilot Point, Industrial Cobalt Alloy Steel, 3/8-Inch (DWA1224)

  • Drill bit has maximum speed and life in stainless steel and other hard metals.
  • Pilot point and split tip design of drill bits for wood, metal and plastic starts on contact and eliminates bit walking.
  • Heavy-duty Cobalt Alloy Steel of DEWALT drill bits delivers 4 times more life than black oxide..
Check Stock