ReviewsPilot Hole Drill Guide

IVY Classic 27003 Carbon-Steel Lock Installation Kit with Guide Template for Wood Doors Carded

  • Adjustable guide template for easy and exact drilling with snap-lock arms for selecting door width and backset.
  • Adjustable plastic guide template fits 1-3/8-inch and 1-3/4-inch thick doors.
  • Adjustable plastic guide template fits 2-3/8-inch and 2-3/4-inch backsets.
  • Includes 1-inch and 2-1/8-inch carbon-steel hole saws and a D type arbor with pilot drill.
Check Stock

1 1/4\ Aircraft Counterbore, Carbide Tipped, (Reduced Shank Counterbore), 3/8\ Shank Diameter, 3 Flutes, 2 3/4\ OAL, (1.25\ Diameter, 1-1/4), 52240, USA Made

  • For counterboring and spotfacing in applications where machine requires a smaller shank.
  • 1/64" Corner Radius, Tool Diameter Tolerance: +.001"/-0". Shank Diameter Tolerance: +0"/-.001".
  • Pilot Hole Diameter:1/4, If using a pilot this is the shank diameter of the pilot you should choose.
  • Minimum Cut Diameter: .281" Because there is a pilot hole the tool will not cut below this diameter..
  • Set screw to hold a pilot or drill bit in place (if you are using a pilot or drill bit).
Check Stock

General Tools Woodworking Pocket Hole Jig Kit #850 - All-In-One Aluminum Pocket System with Carrying Case

  • POCKET HOLE SET: Our easy-to-use tool creates corner and angle pocket hole joints for leg-and-rail connections, building face frame cabinets, sneaking screws into tight spots, and securing picture frames, with unlimited applications..
  • ANGLED DRILL GUIDE: The drilling kit includes a pocket hole jig with a clamp, replaceable #32 - 3/8" step drill bit, 3/8" steel stop collar, and a hex wrench 6" square drive bit. Our wood products are compliant with Forest Stewardship Council (FSC)..
  • WOODWORKING STARTER KIT: You have access to 25 coarse drive screws, 25 fine square, and 25 wooden hole plugs to complete your projects. The hard plastic carrying case is convenient when bouncing back and forth from home to the shop..
  • SCREW STARTER TOOL: DIYers and expert artisans turn to our jig kit to build their wooden projects. Use the jig to drill steeply pitched counter bores in one joint member, then drive self-tapping screws (without pilot holes) into the other member..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

Drilax 6 5/8 inch Diamond Hole Saw Drill Bit Tile Commercial Drain Ceramic Porcelain Kitchen Bathroom Shower 6-5/8

  • HIGH QUALITY, DURABLE Diamond Coated Hole saw Tool 6-5/8 inches Diameter, PROFESSIONAL Quality Tool for Drilling Holes in Tiles, Glass, Marble, Granite, Ceramic, Porcelain.
  • STANDARD 3/8 inch Shank Use with standard electric or cordless drill - Commercial Drain Installation.
  • VERY RARE SIZE for Commercial Drain Installation - ACTUAL hole diameter may be 1/8 inch larger than 6-5/8 inches depending on the material removed..
  • Use water as coolant to prolong the tool life, use a wood guide these tools do not need a center pilot drill. DRILAX Quality - We are here to help..
  • SAVE BIG for DIY Kitchen, Bathroom, Shower, Faucet Installation Projects.
Check Stock

Drilax 8 inch Diamond Hole Saw Drill Bit Tile Glass Granite Ceramic Porcelain Coated Core Bits Holesaw DIY Kitchen Bathroom Shower

  • HIGH QUALITY, DURABLE Diamond Coated Hole saw Tool 8 inches Diameter, PROFESSIONAL Quality Tool for Drilling Holes in Tiles, Glass, Marble, Granite, Ceramic, Porcelain.
  • STANDARD 3/8 inch Shank Use with standard electric or cordless drill..
  • VERY RARE SIZE - ACTUAL hole diameter may be 1/8 inch smaller than 8 inches depending on material removed..
  • Use water as coolant to prolong the tool life, use a wood guide these tools do not need a center pilot drill. DRILAX Quality - We are here to help..
  • SAVE BIG for DIY Kitchen, Bathroom, Shower, Faucet Installation Projects.
Check Stock

VEVOR Concrete Hole Saw Kit, 1-2/11', 1-3/5', 2-9/16', 3-5/32', 3-15/16' Drill Bit Set SDS Plus & SDS MAX Shank Wall Hole Cutter w/a 4-1/3' Connecting Rod for Concrete, Cement, Stone Wall, Masonry

  • Hole Saw Tools in One Kit: Our concrete hole saw kit provides 10PCS, including 1-2/11" to 3-15/16"(30-100 mm) of hole saws, SDS PLUS and SDS MAX shanks, 2 pcs 4-1/3"(110mm) pilot drill bits. Easily store and carry our hole saw tool kit in our zip-up storage case made of aluminum..
  • 135° Sharp Pilot Drill Bit: The 135-degree pilot drill bit ensures you open the wall hole in precisely the right place every time. And the multi-edged blades of the hole saw are designed to make your drilling cleaner, faster, and more efficient. The chip removal hole can quickly remove dust, thus preventing clogging..
  • Premium Material: Hole saw for masonry is made of high-quality carbon steel. It is sturdy and durable. They are sharp enough to open the wall and wear-resisted. And the connecting rods with 40CR steel are rigid and not easy to break..
  • For most Hammer Drills: The shank of the connecting rod adopts SDS PLUS and SDS MAX design, which is compatible with four-hole and five-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
  • Wide Application: This masonry hole saw can drill through common walls and floors made of brick, concrete, cement, and stone. It makes installing air conditioners, water pipes, ....
Check Stock

Drilax 7 inch Diamond Hole Saw Drill Bit Toilet Hole Ceramic Porcelain Tile Coated Core Bits Holesaw DIY Kitchen Bathroom Shower

  • HIGH QUALITY, DURABLE Diamond Coated Holesaw Tool 7 inches Diameter, PROFESSIONAL Quality Tool for Drilling Holes in Tiles, Glass, Fish Tanks, Marble, Granite Ceramic, Porcelain.
  • Toilet hole cutout through porcelain tiles. STANDARD 3/8 inch Shank Use with standard electric or cordless drill..
  • RARE SIZE - ACTUAL hole diameter may be slightly larger than 7 inches depending on material removed..
  • SAVE OVER 80 Percent for DIY Kitchen, Bathroom, Shower, Faucet Installation Projects.
  • Use water as coolant to prolong the tool life, use a wood guide these tools do not need a center pilot drill. DRILAX Quality - We are here to help..
Check Stock

Rannb 38mm/1.5 Inch Hole Saw Carbide Tipped Hole Saw for Cutting Stainless Steel Plate, Iron, Steel

  • ⭐【Material】Our hole saw adopts premium Tungsten Carbide Tipped(TCT) with high hardness and good wear resistance..
  • ⭐【Dimension】Cutting Dia: 38mm/ 1.5".
  • ⭐【Ideal Design】Split tip pilot drill prevents damage by gradually guiding cutter to material..
  • ⭐【Package Content】1 x Hole Saw + 1 x L Wrench + 2 x Pilot Drill Bit.
  • ⭐【Applicable Material】You can easily to drill on the stainless steel plate, iron, steel, castings, aluminum alloy and other metal plate drilling..
Check Stock

Drilax 7 1/2 inch Diamond Hole Saw Drill Bit Tile Glass Granite Ceramic Porcelain Coated Core Bits Holesaw DIY Kitchen Bathroom Shower

  • HIGH QUALITY, DURABLE Diamond Coated Hole saw Tool 7-1/2 inches Diameter, PROFESSIONAL Quality Tool for Drilling Holes in Tiles, Glass, Marble, Granite, Ceramic, Porcelain.
  • STANDARD 3/8 inch Shank Use with standard electric or cordless drill..
  • VERY RARE SIZE - ACTUAL hole diameter may be 1/8 inch smaller than 7-1/2 inches depending on the material removed..
  • Use water as coolant to prolong the tool life, use a wood guide these tools do not need a center pilot drill. DRILAX Quality - We are here to help..
  • SAVE BIG for DIY Kitchen, Bathroom, Shower, Faucet Installation Projects.
Check Stock

JINGLING 50mm 2\ inch Diamond Drill Bit Hole Saw for Glass Tile Ceramic

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock

SharCreatives Adjustable Hole Saw Cutter Kit with ABS Dust Shield for Recessed Lights, Ceiling Speakers, Cornhole Boards Cuts Plywood Sheetrock Plaster Fiberglass Plastic, 1-5/8" to 8" (40-200mm)

  • ...-5/8" to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • ✔ PROFESSIONAL HEAVY DUTY WITH IMPRESSIVE DESIGN AND QUALITY - This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32", 3/16", 1/4", 5/16, 3/8", one 2m tape measure.
  • ✔ COMFORTABLE, CONVENIENT AND EFFECTIVE - Drill bits are effective for drilling that achieves precision and prevents walking. This single hole cutter kit replaces dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed saving you time and money..
  • ✔ WELL ORGANIZED IN THE CARRYING CASE - heavy-duty, easy to carry plastic organizer to help keep the parts well organized.
  • ✔ PROFESSIONAL AND PERSONAL USE this hole cutter kit....
Check Stock