ReviewsPilot Operated Pressure Relief Valve

Mityvac MV6400 1 Gallon Fluid Dispensing System for Topping Off Fluid Reservoirs, Master Cylinders Includes 5 ft. Hose with Wand and Flow Control Valve

  • The MV6400 is intended for filling reservoirs with fluids such as engine coolant, motor oil, or wiper, automatic transmission, brake or power steering fluid. However, with the proper accessories it can safely be used to pressure bleed hydraulic brake or clutch systems, or refill or top-off sealed automatic transmissions..
  • An integrated manual pump dispenses fluid by pressurizing the 1.2 gallon (5 liter) reservoir and Includes a thumb-operated tilt valve that is conveniently located for manual pressure relief and doubles as a safety valve to prevent over pressurization..
  • Fluid is continually dispensed as long as there is pressure in the reservoir and freeing up the operator’s hands.
  • pumping is only required to build additional pressure..
  • The pump tube is sealed to prevent exposure to chemicals and cleans easily between fluid changes..
  • For convenience and speed, push-to-connect, quick-change-style couplers are used at both ends of the fluid dispensing hose..
Check Stock

Acecare Charging Station Also Called Filling staion for Compressed air refilling

  • CONNECT. Connect compressor with valve to fill gases to tanks or pcp air guns..
  • WITH GAUGE. It is with gauge that shows the pressure in the tank or gun that receive the gases..
  • EASY TO INSTALL. It is easy to connect the valve and compressor, just very few steps..
  • WITH PRESSURE RELIEF KNOB. It is with pressure relief knob that will relief the rest pressure in hose to keep it safe when you take off it from valve..
  • WITH HOSE. The filling staion is with hose on it, and you do not need to prepare another hose when you fill gases..
Check Stock

Hitachi Pilot Unloader Check valve Combo for Gas Compressors 885426 EC2510E

  • Replaces Hitachi 885426 for EC2510E Gas Compressors 110 - 140 PSI Made in USA.
  • Check valve /Unloader valve / Pilot valve all in one - (continuous run unloader) for gas & electric powered air compressors.
  • 110 - 140 PSI factory setting. pressure can be adjusted 30-40 psi up or down.
  • 1/2" Metric Flare TOP Inlet x 3/8" Male Pipe Thread outlet to air tank.
  • 30 scfm Rating ! Pressure can be adjusted 30-40 PSI Higher or Lower. If pressure adjustment is needed, Please see Pic attachment for adjustment instructions..
Check Stock

DA YUAN 14 pcs Automotive Cooling System Radiator Pressure Tester Kit

  • Aluminum adapters for use with most cars trucks.
  • Kit includes hand pump to 35 PSI, 12 Aluminum Radiator Adapters, Thermometer, Form Fitted Case.
  • Tester helps detect internal and external leaks..
  • Perfect for head gasket failure detection (which side of block or which cylinder leaks) ..
  • Thumb-operated relief valve for quick and easy pressure release and self-locking quick-disconnecting components..
Check Stock

Mansfield Plumbing 384.386.WHT Summit ADA Toilet, White

  • elongated front, smart height (16-1/2" high bowl).
  • High performance magnaflush flushing technology.
  • Smart fasten 3-bolt tank-to-bowl connection.
  • meets ADA requirements for accessibility.
Check Stock

Tool Daily Thermal Release Valve for Pressure Washer Pump, 1/4 Inch NPT, 2-Pack

  • Fitting: 1/4″ NPT. The outside diameter of male thread is 0.54 inch. Include 2 pieces pressure washer release valve..
  • Compatible with many brands, such as Generac,Homelite, Karcher, Briggs, Power Stroke, Husky, Black Max, Craftsman, Him Ore and Ridged pressure washers. Replaces Homelite part numbers 678169004, 678169002 and 678169001. Replaces Briggs and Stratton parts 208673GS, 21783GS, 194298GS and B3090GS..
  • Thermal Relief Valve protects pressure washer pumps operating in a safe temperature range to prevent overheating. When water temperature reaches above 145º F, pump seals may fail. The thermal relief valve will open to release hot water and allow cold water to enter the pump. So it continues to operate at a safe temperature. If the pump have ever overheated, the thermal relief valve must be replaced..
  • Made of brass. Max. inlet pressure of pumps is 200 PSI..
  • Quick reply within 10 hours. Any issue or question, please free to contact with us..
Check Stock

700-506 Gas Valve, Fast Opening, 200000 BTU\\/H, Combination Gas Valve, Widely used in natural, manufactured, mixed, LPG and LPG\\/air mixtures

  • The 700-506 series gas valve is designed for intermittent pilot, direct spark and hot surface applications.Small size, large flow，Contains a manual valve, pilot valve and a main air pressure regulator..
  • Just make sure the valve you use has the btu rating range within 5% of the original. Also some are labeled at different water column but as long as it is very close range the 700-506 gas valve will work..
  • Compatible with various gas types: natural, manufactured, blends, LPG and LPG/air mixtures..
  • The 700-506 thermostat gas valve is suitable for many residential and commercial places, and is widely used in wall-mounted heaters, boilers, portable domestic stoves and central heating equipment..
  • Thank you for purchasing our products, we provide the best service while providing quality products, if you have any questions, please feel free to contact us and give us valuable suggestions..
Check Stock

Keg Regulator, Kegerator Regulator, Beer Regulator, Co2 Tank Regulator, Beer Keg Regulator, Co2 Regulator Gauge with CGA-320 Inlet, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure By MRbrew

  • ????【No Leaks】The co2 regulator wears two tank washers to prevent leakage of the connection between the tank and the c02 regulator.
  • The relief valve on the keg regulator also has a food grade silicone washer to prevent leakage of the relief valve..
  • ????【Maintains Consistent Pressure】The lock ring can be quickly locked without re-adjustment, And maintains steady Co2 pressure with no leaks. Sturdy durable dual gauge beer regulator features a multi-stage body that gives you more precise control when making small adjustments to the output pressure..
  • ????【Easy to Adjust & Read】The kegerator regulator is easily adjustable by hand, Making adjustment effortless even at freezing temperatures. Whether it’s a bar, camping or family gathering, this beer keg regulator is your best choice..
  • ????【Relief Valve & Shut Off Valve】For added safety, The tap regulator has a manual pressure release valve that releases pressure at 55-65 PSI. There is also a shut off valve on the co2 pressure regulator that allows for instantly shutting off pressure to the keg without backing up your gas line and prevents backflow into the beer keg regulator..
  • ????【Care-free Warranty】Please feel free to contact us if any problem, we would try our best to h....
Check Stock

EVIL ENERGY Diesel Fuel Rail Pressure Plug Valve Compatible with Dodge 5.9L Cummins 2003-2007 213072800

  • INSTALLATION SITE AND FIT- EVIL ENERGY Fuel Rail Plug replaces the factory banjo bolt mounted on the top side of the pressure relief valve.Compatible....
  • Eliminate your stock pressure relief valve with this Fuel Rail Plug, which also prevents high-pressure fuel from being returned to the fuel....
  • APPLICATION-This is for maintaining fuel rail pressure under heavy acceleration. Also prevents bleed off overnight if the stock valve is stuck open or....
  • RIGID STEEL CONSTRUCTION: Each Fuel Rail Plug is constructed of stainless steel to avoid cracking and excessive heat expansion.Effective....
  • Weld-free construction that gives Fuel Valve better leakproofness.Threads in perfectly and doesn't leak..
Check Stock

DEF Fuel Injector Common Rail Fuel Plug-1050070 for 2003-2007 Ram 2500 3500 5.9L

  • Fitment:2003-2007 Ram 2500 3500 and 5.9L Cum-mins..
  • Material:Made of Stainless Steel to avoid cracking and excessive heat.Effective anti-oxidation,anti-rust,anti-corrosion..
  • Usage:Replace the factory banjo bolt mounted on the top side of the pressure relief valve..
  • Features:Maintain fuel rail pressure during high engine load conditions.Prevent high-pressure fuel from being returned to the fuel tank.Eliminate....
  • Benefits:Weld-free construction that give fuel valve better leakproofness.Capped off completely pressure relief valve increase security..
Check Stock

WINTOOLS 18pcs Auto Cooling System Radiator Cap Pressure Tester Kit Pump Gauge Adapters

  • This product is not fit all types of cars, please check it..
  • This radiator pressure tester helps find internal and external leaks in your cooling system..
  • 8 radiator cap adapters included, and the test range is from 0 to 35 psi, ideal for domestic and import vehicles. With the special design of purge and refill tool connection, it fits nearly all type of radiator openings..
  • Included a Pump with gauge For testing automotive pressurized cooling systems up to 35 PSI Has 8 radiator cap adapters for servicing most domestic and import vehicles..
  • Large volume pump capacity reduces strokes required to pressurize cooling systems Self-locking quick-disconnect components Thumb-operated relief valve for convenient pressure release.
Check Stock