ReviewsPim Module

Tii 95s-1-12 Whole House Nid Dsl Filter Adsl Pots

  • Module’s unique design provides customer bridging and ADSL POTS splitting - all in one module..
  • Module easily snaps in and out of the customer side of the NID and occupies only one position, thereby not compromising the NIDÂ’s overall....
  • The Tii splitter design makes it possible to use a single phone line to provide triple play services including ADSL2+ and IPTV..
  • With module installed, an additional standard POTS line module is not needed..
  • Module includes Tii’s unique patented switchable RJ-11 Jack. The Auto-Jack does not require an RJ-11 plug for normal operation and delivers....
Check Stock

ICC/Intervox MEO-627PN-02-643, Condenser Microphone 6.0 X 2.7

  • DEPENDABLE TO USE: The Mic sensor sound module is professional manufacturing, voice detection module has high performance, strong reliability, making sure safety use..
  • MAIN FUNCTION: This microphone sound detection module can detect sound strength of the environment, with high accuracy, great for professional usage..
  • ANALOG OUTPUT: The microphone sensor sound module supports analog voltage signal output, the signal amplitude is VCC/2, stable to use..
  • ADJUSATBLE GAIN: The mic sensor voice module has high sensitivity, built in amplifier circuit, and the gain can be adjusted as needed..
  • AD COVERSION: The microphone voice detection module can obtain the voltage signal of sound intensity through AD conversion..
Check Stock

HiLetgo HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino

  • The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module.
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234.
  • Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode..
  • 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board.
Check Stock

Bose Bass Module Connection Cable

  • Bose Bass Module Connection Cable for use with the Bose TV Speaker.
  • A 15′ (4. 6 m) cable with 3. 5 mm connectors for a wired connection from a Bose Bass Module to the Bose TV Speaker..
  • Expand your system with an optional bass module for a more heart-pounding, cinema-quality experience..
  • The Bose TV Speaker requires a wired connection and is compatible with the Bose Bass Module 500 or 700.
  • This an optional cable wire for expanding your Bose TV Speaker to connect to a Bose Bass Module.
Check Stock

HiLetgo 2pcs HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino

  • The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module.
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234.
  • Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode..
  • 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board.
Check Stock

2pcs Ultrasonic Module HC-SR04 Distance Sensor with 2pcs Mounting Bracket for Arduino Uno R3 Mega 2560 Nano Raspberry Pi 3 Smart Robotics Projects

  • HC-SR04 Ultrasonic Sensor Distance Module:using IO trigger for at least 10us high level signal..
  • The Module automatically sends eight 40 kHz and detect whether there is a pulse signal back..
  • If the signal back,through high level,time of high output IO duration is the time from sending ultrasonic to returning.Test distance = (high level time velocity of sound (340M/S)/2..
  • Resolution:0.3 cm,Module precision:blind spots (2cm)-SUPER CLOSE..
  • The module performance is stable,measure distance accurately.SRF05,SRF02 ultrasonic ranging module comparable.This module is compatible with GH-311 anti-theft module..
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • -Arduino MEGA R3 (generic high quality) + USB cable -6xAA Battery holder (9VDC) -WiFi ESP8266 module -Model Bluetooth Master / Slave HC-05 -Box with plastic cells (organizer of components) -Shield for prototypes + Mini-Breadboard -Large Breadboard (830 points ) -Dupont Cables 10 * Female-Female + 10 * Male-Female + 10 Male-Male -Cable Jumper for breadboard -6 Push Buttons with multicolored caps -Joystick Module type PS2.
  • -RC-522 RFID Module with white RFID Card and RFID Keychain -High-precision RTC Real-Time Clock Module DS3231 and EEPROM AT24C32 -PIR Presence Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 *....
Check Stock

5PCS HC-05 Wireless Bluetooth Receiver RF Serial Transceiver Module Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module

  • HC-05 Bluetooth Module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup..
  • Default baud rate:9600, Button: Press the button.
  • the module enter the AT mode. AT commands are executed only in AT mode..
  • HC-05 is able to operate in both master and slave mode. Its communication is via serial communication which makes an easy way to interface with controller or PC. It's ideal replacement to your wired serial connection..
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your motherboard project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Note: The module doesn’t suitable for IOS system..
Check Stock

Logitech USB Unifying Receiver - 2 Pack

  • Applications: This device can be wildly used to wireless remote control,wireless audio,somatosensory devices, RFID, NFC, smart grid, smart home, etc..
  • NRF24L01 Wireless Transceiver Module with 125 Communications channels, multi-point communication and frequency hopping to meet the communication....
  • NRF24L01 wireless transceiver module built-in 2.4GHz antenna, small size, 15x29mm (including antenna).
  • it can be directly connected to a variety of....
  • The operating voltage of the wireless module is generally 3.3v, while the ordinary 51 microcontroller is 5v. This module is convenient to shop....
  • NRF24L01 Socket Breakout Adapter with NRF24L01 Wireless Transceiver Module.
Check Stock

EC Buying AD620 High Accuracy Low Power Programmable Instrumentation Amplifier Module Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal/Small Amplifiers Module

  • ... range of 1 to 10,000. Ideal for portable (or remote) applications. With high accuracy, low offset voltage, and low offset drift, the AD620 is ideal for precision data acquisition systems such as electronic scales and sensor interfaces. Also features low noise, low input bias current, and low power consumption. The module has a fixed voltage output..
  • ♥Basic Features: ✭Module Name AD620 Instrument Programmable Amplifier ✭Module size:50mm * 50mm ✭Module power supply: 5V-24V ✭Module input signal type: single-ended signal or differential signal ✭Module signal input and output range: the input signal range is within 100 microvolts of the power supply, and the output signal range is within the power supply ✭Module bandwidth: AD620: 120KHz (G=100), AD623: 800KHz (G=1), AD620/623 is lower than 50KHz at high gain, and higher than 1MHz at low gain.
  • ♥ Other Features: ✭Module gain: When there is no solder slip, the AD620 will zoom by 10 times by default, and the AD623 will zoom by 20 times by default. During welding slip, AD620: G=1+50K/Rg, AD623: G=1+100K/Rg ✭Maximum magnification of the module: more than 2000 times (actual measurement), due to the large gain of the waveform frequency band, it is recommended to use multi-stage amplification wi....
Check Stock

1024 P/R 5VDC 10mm Diameter Hollow Shaft Incremental Rotary Encoder

  • This is the "momentary" variety of the touch sensor - touch and it turns on, release and it turns off..
  • Positive and negative can be used as a touch surface,can replace the traditional touch button..
  • Four M2 screws positioning holes for easy installation.Module can be installed in such as surface plastic, glass of non-metallic materials..
  • In addition to the thin paper ( non-metallic ) covering the surface of the module , as long as the correct location of the touch , you can make hidden in the walls, desktops and other parts of buttons..
  • The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption.
  • When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode..
Check Stock