ReviewsPin Box Header

Noctua NA-SYC1 chromax.Black 4 Pin Y-Cables for PC Fans Black

  • 3x NA-YC1 chromax.black y-cables for running two fans on one fan header.
  • Two 4-pin PWM fans can be controlled simultaneously on one PWM fan header.
  • 4-pin connector supports both 3-pin and 4-pin fans.
  • Black sleeving: ideal for creating PC builds with neat, focused aesthetics.
Check Stock

BTF-LIGHTING Neon WS2812B IC LED RGB PC Light Strip 2PCs 19in Individually Addressable LED Strip for 5V 3-Pin RGB LED headers for Asus Aura, Asrock RGB Led, Gigabyte RGB Fusion, MSI Mystic Light

  • 【Wide compatible】BTF-LIGHTING Addressable RGB LED strips are compatible with ASUS Aura Sync, MSI Mystic Light Sync and ASRock POLYCHROME RGB motherboards with 3 pin +5V ADD_Header (+5V,DATA,N/A,GND) or (+5V,DATA,GND). Please NEVER connect it to 4pin 12V RGB_HEADER (12V, G,R,B). Otherwise you will destroy the entire led strip..
  • 【Cuttable Addressable RGB LED Strip】2PCs 19in BTF-LIGHTING WS2812B LED strip allows for control of each individual LED to display colors independently for nearly unlimited combination of colors and gradients.Two strips can be connected in series and each LED can be cut.Enough light strip length to cut your own desired lengths..
  • 【Various effects】 it can display many cool dynamic color effects, such as rainbow, wave, breathing,strobing,gradual change, color cycle, comet, music sync etc.The super bright led strips for modding your PC case which create amazing RGB sync effects and more brighter, these lights strips perfect for gamers or someone who want to decorate the computer..
  • 【Easy installation】 There is also double-sided tape on the back of the LED light strip, which is suitable for fixing it on any dry and flat surface without any screws or clips. The full kit comes with all the essential parts you may need for y....
Check Stock

Noctua NA-SYC1, 4 Pin Y-Cables for PC Fans (Black)

  • Y-type splitter cables for running two fans on one fan header.
  • Two 4-pin PWM fans can be controlled simultaneously via one PWM fan header.
  • RPM speed signal of one fan is transmitted to the motherboard for monitoring.
  • 4-pin connector supports both 3-pin and 4-pin fans.
  • Black connectors and black cable sleeving for clean optics.
  • Trusted Noctua quality backed up with 6-year manufacturer’s warranty.
Check Stock

risingsaplings Rpi Pi GPIO Breakout Board 3 Types Output Terminal Block Module for Raspberry Pi 2 3 4 Zero

  • The module has been soldered and assembled. Support for Raspberry Pi 2 3 4 Zero..
  • 3 Type Output: Male Pin Header, Female Pin Header and Terminal Blocks..
  • With 4pcs double-screw bolts and 8pcs screws. (Noted: the module not included Raspberry Pi Board)..
Check Stock

Songs from the Neighborhood: The Music of Mister Rogers

  • A BELOVED COLLECTORS ITEM: King Friday is a Mr. Rogers icon. Now you can have this exclusive enamel collector pin to showcase your fandom..
  • HARD ENAMEL & GLOSS FINISH: Attention to detail is a must for collector’s items. This decorative pin features a detailed King Friday character made of hard enamel and a glossy finish..
  • SHOWCASE YOUR PIN: This pin measures approximately 1.5-inches in height – the perfect size to display in your collection of other Mr. Rogers collectible items..
  • OFFICIALLY LICENSED HEADER CARD: Pin will arrive displayed on an officially licensed Mr. Rogers convention header card. Having this impressive showcase piece will greatly enhance your collection!.
  • LIMITED EDITION: A San Diego Comic-Con 2018 exclusive! Only 1000 pins were produced. Don’t pass up this opportunity to own a classic Mr. Rogers character in the form of a rare collector’s pin!.
Check Stock

E-Simpo 10pcs 2.54mm (0.1") Hole Round Female Header Socket Gold Single Row Arduino PCB Female IC Crystal Socke High Quality (1x40P Hole Female Header)

  • 10pcs Single Row 40 Pin 0.1"(2.54mm) Header Socket Connector.
  • Single Row 40Pin Round Female Pin Header.
  • High Quality, Gold-Plated Contact,better electrical conductivity and low contact resistance. Generally used in circuit boards and other low-voltage circuits..
Check Stock

FFB1212EHE-F00 120 x 120 x 38mm Cooling Fan, 190 CFM, 4000 RPM, 59 dBA, 17.78 air pressure, 3 pin Tach connector, Combo Set of 3 Pieces, Ship from USA !!

  • Air Flow: 190 (Mini. 170.92) CFM or 5.38 (Mini. 4.84) Cubic Meter per minute.
  • Air Pressure: 17.78 (Mini. 14.30) mmH2O or 0.70 (Mini. 0.563) inchH2O.
  • Rated Input Voltage: 12VDC, Operating Input Voltage: 7 – 13.2VDC, Input Current: 2A (Max. 3A).
  • 3-pin connector with speed (Tach) sensor – Caution: the 3-pin header must provide a minimum of 3A of power in order to power this fan so please check if your motherboard’s 3-pin header can provide enough power and if the header might overheat. We suggest using a fan controller with enough power, or purchase the same fan in the 4-pin molex + 3-pin connector version so you can power the fan directly from a power supply but without the ability to control the fan speed..
Check Stock

DEEPCOOL CF120 3IN1 Addressable RGB Motherboard SYNC by 5V ADD RGB 3-pin Header SYNC with Other ADD-RGB Devices Cable Controller Available 3x120mm PWM Fans

  • If your motherboard has ONE 5V 3-pin ADD-RGB header, you can use it to connect RGB extender cable to control and SYNC these three fans and one more....
  • If your motherboard does not have 5V 3-pin ADD-RGB header, you can use the included cable controller to connect the RGB extender cable to realize SYNC....
  • Fan speed can be intelligently controlled by motherboard in accordance with temperature.
  • Utilize 12pcs of independently programmable RGB LEDs for amazing display effects.
  • Fan Connector: 4Pin. LED Type: Addressable RGB LED. LED Connector: 3pin (+5V-D-G). LED Control: motherboard with 5V ADD-RGB Header. Cable controller....
Check Stock

Screw Terminal Block Breakout Shield Module for Arduino UNO R3

  • Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Uno module..
Check Stock

risingsaplings TCS34725 RGB Color Sensor Colour Recognition Module RGB IIC Development Board with IR Filter and White LED for Arduino STM32

  • come with 7 Pin male pin header and right angel pin header.
Check Stock

PWM Fan Splitter Cable 2 Pack, PC 4 Pin Fan Power Extension Cable 1 to 3 Fan Splitter Converter [Sleeved Braided] for Computer ATX Case 4-Pin/3-Pin Cooling Fan Cable - 12 Inches

  • 【1 to 3 Fan Splitter Cable】4 Pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans..
  • 【Easy to use】The Fan Splitter Connects 3 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector.
  • 【Steady and Durable】Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy..
  • 【Broad Compatibility】3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with this PWM fan splitter cable..
  • 【Lifetime Warranty】Originated from confidence in product quality, we provide unconditional lifetime warranty ensures long-time satisfaction of your purchase and provide 24-hour service online..
Check Stock