ReviewsPin Fan Extensions

PWM Fan Splitter Cable 2 Pack, PC 4 Pin Fan Power Extension Cable 1 to 3 Fan Splitter Converter [Sleeved Braided] for Computer ATX Case 4-Pin/3-Pin Cooling Fan Cable - 12 Inches

  • 【1 to 3 Fan Splitter Cable】4 Pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans..
  • 【Easy to use】The Fan Splitter Connects 3 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector.
  • 【Steady and Durable】Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy..
  • 【Broad Compatibility】3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with this PWM fan splitter cable..
  • 【Lifetime Warranty】Originated from confidence in product quality, we provide unconditional lifetime warranty ensures long-time satisfaction of your purchase and provide 24-hour service online..
Check Stock

CERRXIAN 4 Pin PWM Fan Hub Splitter Power Supply Cable 1 to 5 Way PC CPU Cooling Case Fan Power Extension Cable for ATX Computer Case 4-Pin & 3-Pin Cooling Fans(14.8inch)(2-Pack)

  • 4-PIN INTERFACE :4-pin PWM fan power supply splitter extension cable can extend 1 CPU fan port to 5 fan ports to solve the lack of pc case fans ports and reduce the load on the motherboard..
  • EASY TO INSTALL :Just insert the PWM chassis fan splitter cable into the motherboard, and then paste the other end to the chassis with double-sided tape. No need to drive..
  • CONNECTOR TYPE :1 TX4 4-pin Female, 1 TX4 4-pin Male for CPU fan (including Detect tach pin), and 4 TX4 4-pin Male for case fan.Compatible with all 12V 4 pin and 3 pin PC case fans..
  • NYLON BRAIDED CABLE :15-inch fan HUB cable with black braided sleeve and tinned copper wire, lower resistance, stable and durable quality..
  • NOTE :Only 1 interface supports speed measurement because the motherboard does not support multiple interfaces at the same time.3-pin does not support temperature control..
Check Stock

CRJ 5-Pin Female PC Fan Adapter Cable for Dell Motherboards

  • Adapter Cable For Connecting Standard 3-Pin And 4-Pin PC Fans To A Proprietary 5-Pin Fan Header.
  • Designed For Compatibility With 5-Pin Fan Headers Found On Dell PC Motherboards.
  • Fully Functional 4-Pin PWM Fan Speed Control Support (3-Pin Analog Fan Speed Control Is Limited To Support By The Motherboard).
  • All Black Appearance And High Quality Construction Featuring High Density Black Sleeving And 22AWG Wiring.
  • Cable Length (Excluding Connectors): 6″/15cm.
Check Stock

PC Fan Splitter Extension Cable - 1 to 2 PWM Fan Splitter Compatible with 3 & 4 Pin PC Cooling Fans, 10 inch Black Braided Nylon Cable (2 Pack)

  • Simple Installation - Our PWM splitter connects 2 computer case fans to a single fan header. 10 inch pwm fan extension cable gives you greater flexibility between the motherboard and PC fans.
  • Durable Construction - Each computer fan splitter has black braided nylon sleeved cables to provide long-lasting performance as well as to prevent dust and wear on the case fan splitter wires.
  • Increased Cooling - Our CPU fan splitter provides better power supply, supports PWM function, increases airflow, reduces the accumulation of heat within the frame and satisfies all your control needs.
  • 3 & 4 Pin Compatible - Each 4 pin fan splitter has a 4-pin female connector on one end, a 4-pin male and a 3-pin male connector on the other, this can be used with 3-pin pc case fans as a 3 pin fan splitter.
  • Money-back Guarantee - We’re proud of the PC cables we sell. If your fan splitter fails to meet your expectations for any reason, we will go the extra mile to make things right.
Check Stock

Gavemi Fan Splitter, PWM 4 Pin PC Case Fan Splitter Adapter Cable Compatible 3 Pin Fan, 12.6 inches

  • Fan splitter cable is compatible with all brands of 4-pin PWM fans and 3-pin fans..
  • It is possible to run three chassis fans at the same time on a single PWM fan header and control the speed..
  • 4 pin fan splitter is a black cable sleeve to make the inside of the case more concise..
  • ength 12.6 inches, 24 AWG pure copper conductor. Pack of two case fan splitter cables..
  • PC fan splitter has a 4-pin male fan connector connected to the motherboard, and the fan header splitter at the other end has three 4-pin female connectors connected to the PWM case fans..
Check Stock

Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

FBHDZVV 4Pin PMW Fan Splitter Cable to 3Pin/4Pin PC Case Fan Sleeved Adapter Cable 1 to 3 PMW Fan Splitter Extension Power Cable Splitter Y Power Adapter Cable PC Computer Cooling Fan Wire Connector

  • The PWM molex fan extension cable for PC motherboard cooling fans are constructed using high-quality material, 10.5 inches cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust..
  • The PC case fan sleeved adapter cable is designed with a 4-pin (Actual 2-Pin) mol-ex connector on the one end and on the other end it splits into 3 X 3/4-pin connector, the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
  • The molex fan connector types of PWM fan extension cable includes one 4-pin(Actual 2-Pin) molx connector and 3/4-pin male plug connector. Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer..
  • Motherboard 4-pin interface, PWM speed control, can be used for multiple cooling fans, expand and expand motherboard 4-pin interface suitable for CPU or computer chassis fan..
  • Molex fan splitter easy to plug, the fan extension cable offers greater flexibility between motherboard and CPU cooling fans.Easily realize the parallel connection of 4-pin PWM temperature-controlled fans, so that the fans can achieve a quieter effect and better heat dissipation..
Check Stock

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable

  • 15 pin SATA to 3 pin / 4 Pin 12V PC case fan power adapter cable.
  • Power 3pin or 4pin (PWM Connector) PC case fan with a 15pin SATA connector.
  • High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
  • Fans will be operated at the fixed SATA voltage of 12V.
  • 2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable.
Check Stock

StarTech.com 12in 4 Pin Fan Power Extension Cable - M/F - Fan power extension cable - 4 pin PWM (M) to 4 pin PWM (F) - FAN4EXT12

  • Extend the connection distance of a 4-pin cooling fan by 12 inches.
  • 1ft Case Fan Extension Cable / 1ft 4-Pin Fan Cable / 1ft PWM Extension Cable / PWM Male to Female / 4 Pin Fan Extension Cable / 12in 4 Pin Fan Power Extension Cable M/F.
  • Extend the placement of a 4-pin computer fan by up to 12in.
  • Designed for CPU Fans with 4-pin connectors.
  • Offers greater flexibility to position Motherboard and CPU Fans for optimal cooling.
Check Stock

TeamProfitcom PWM Fan Splitter Adapter Cable Sleeved Braided Y Splitter Computer PC 4 Pin Fan Extension Power Cable 1 to 3 Converter 10 inches (2 Pack)

  • This cable is compatible with all 4 pin and 3 pin case fans !!!.
  • Sleeved in Black Braiding With a 4 Pin Female Connector at One End and Splits to 3 Male Connectors at The Other End ( 1 of them is 4pin ,2 of them is 3pin ).
  • The Fan Splitter Connects 3 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector.
  • The Fan Splitter Cable Provide Additional Fan to increase Airflow in Your Computer Case.
  • The length of the product (Approx): 10,5 inches, Color: Black.
Check Stock