ReviewsPin Lock Keg Conversion

Beverage Factory 5 gal Pin Lock Keg Reconditioned Beer Keg

  • This 5 gallon pin lock soda keg is perfect for dispensing your own home brewed beer, soda, or cider.
  • Originally made by Cornelius, Firestone, or Spartanburg.
  • This keg has been cleaned and pressure tested to hold pressure and includes a new set of O-rings.
  • Lid includes a Hansen pressure release valve, which does not allow for manual pressure release.
  • Measures 22" tall and 9" in diameter (Note: add an inch to the height when ball lock is attached).
Check Stock

74 Gram 5/8 thread CO2 Bulb 2 pack

  • Portable size and Lightweight Construction allows you bring to any outdoor barbeque, party and also easy to store in your fridge.
  • Keg Regulator with 3/8" thread adapter, connect ball lock disconnect mfl or pin lock disconnect mfl.
  • Widely Use,the keg charger for charging and dispensing homebrew beer,kombucha, cold brew coffee, seltzer water, iced tea,and any other beverage.
  • 0-30 PSI gauge on regulator is accurate and accepts different sizes of CO2 cartridges, but please note it not be used with higher pressure argon or....
  • Quality Guarantee, any problem for the regulator, money back or replacement guarantee..
Check Stock

Tower Kegerator Conversion Kits Mini Refrigerator Conversion Kit Include Adjustable Beer Faucet Beer Regulator Beer Gas Line D Keg Coupler for Draft Beer Dispensing Equipment by PERA

  • The Sankey Keg Coupler is made of chrome-plasted brass body and stainless steel proble, can retain the beer flavor after long-term use. The beer keg coupler can fit all American D Type Keg, Perfect for dispensing beer, wine, soda and other carbonated drinks..
  • The Tap Tower Kegerator Conversion Kits includes most Convert kits you need to easily conert a refrigerator or freezer into your very own draft beer dispenser. Include Beer Tap, Beer gas regulator, beer gas line, D keg Tap, beer wrench etc..
  • This DIY Kegerator Conversion kit comes with almost everything you need to serve your favorite beverages, just connect the kegs and CO2 tank..
  • It is save your money and space by building your draft beer dispenser system using your refrigerator and PERA kegerator conversion kits..
  • Quality Guarantee, Any Problem for the kegerator conversion kit , Please contact us, Money Back or Replacement Guarantee..
Check Stock

Kegco 5 Gallon Ball Lock Keg - RubberHandle

  • 5 GALLON KEGS: This Kegco rubber handle home brew beer keg (also referred to as a Cornelius keg or a Pepsi keg). It can hold up to 5 gallons (19 liters). This keg is designed for use with ball lock keg couplers, and features a sanitary 304 grade stainless steel construction that makes it suitable for storing not only beer, but also wine, soda, kombucha, and cold brew coffee..
  • SANITARY STAINLESS STEEL CONSTRUCTION: This keg is constructed from sanitary 304 grade stainless steel, which is durable, easy to clean and sanitize, and highly resistant to rust and corrosion. This makes the keg suitable not just for storing and dispensing home brewed beer, but also for storing and dispensing wine, soda, kombucha, cold brewed coffee, or any other beverage that you’d like to dispense from a keg..
  • DESIGNED FOR BREWER CONVENIENCE: This keg has a permanently molded rubber bottom skirt and top handle that makes it easy to carry and stack, making it ideal for smaller breweries and home brewers with limited available storage space. The keg has a stainless steel lid that fastens tightly to the body and features an integrated pressure release valve that allows you to easily depressurize the keg..
  • BALL LOCK FITTINGS: This ball lock Cornelius Pepsi home brew beer ke....
Check Stock

10L (2.64 Gallon) Stainless Steel Mini Keg for Beer Homebrew Kegerator Growler Ball Lock Cornelius Corny

  • MINI KEG is convenient for small batches and on-the-go homebrewers. Compatible with a variety of cap accessories including double ball lock for conversion to a cornelius keg! Search Amazon for B01D52ZWFC to find it.
  • 10L CAPACITY is perfect for taking your new beer to a party or experimenting with a new small batch recipe. Easily force carbonate, dispense, or transfer with accessories..
  • STAINLESS STEEL construction ensures high quality and no off flavors imparted on your beverage of choice. Great for beer, cold brew nitro coffee, easy kegged wine or kombucha..
  • CAPACITY: 10 Liters – 2.65 Gallons – 340 ounces – 21 pints of cold, tasty beer! DIMENSIONS: 7″ Diameter, 19.5″ Height.
  • Includes (1) Mini Keg and (1) stainless steel storage cap. Check out The Weekend Brewer store for more cap options..
Check Stock

EdgeStar BR7001BL Full Size Built-In Kegerator Conversion Refrigerator

  • Includes: One (1) 2.5 stainless steel beer tower with stainless steel faucet.
  • PLEASE NOTE: This kegerator is designed to fit one sixth barrel or one Cornelius keg only.
  • If planning to use a ball lock keg a homebrew conversion kit will need to be purchased separately.
  • Dimensions (fridge only) 33-1/4" H x 17-1/2" W x 18-1/4" D.
Check Stock

EdgeStar KC1000SS Craft Brew Kegerator for 1/6 Barrel and Cornelius Kegs

  • Includes: One (1) 2.5 stainless steel beer tower with stainless steel faucet.
  • PLEASE NOTE: This kegerator is designed to fit one sixth barrel or one Cornelius keg only.
  • If planning to use a ball lock keg a homebrew conversion kit will need to be purchased separately.
  • Dimensions (fridge only) 33-1/4" H x 17-1/2" W x 18-1/4" D.
Check Stock

Copper Fit Unisex Compression Sock, Choose Size and Pairs (2, Large/X-Large), Black

  • Allows you to hook up your Tapcooler counter pressure bottle filler to your keg, vs the faucet..
  • Includes close to 78 in. of tubing so you'll have plenty of clearance from your Keg to your bottling area..
  • Included valve hooks right up to the Tapcooler and is to open and close as you fill your bottles..
  • Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling!.
Check Stock

FERRODAY 5/16 Disconnects Set 7/16-20UNF Flared Gas In and Liquid Out Swivel Nut Stems for Cornelius Keg Swivel Nuts for Corny Keg - 2 PCS

  • Makes it possible to attach your 5/16" tubing, works with Pin Lock and Ball Lock MFL Connectors.
  • Use this setup to easily connect/ disconnect your line from a home brew keg coupler.
  • 5/16" Barb to 7/16-20 UNF Flare Swivel Nut is used to connect most keg connected lines..
  • Kegging Essentials, brew kits and accessories, great for home or commercial draft beer system.
Check Stock

Dual System 2 Stage CO2 Pressure Regulator For Draft Beer Regulators and Kombucha Set Ups. Connect 2 Systems to 1 Tank. CGA-320 Connection

  • Allows you to hook up your Tapcooler counter pressure bottle filler to your keg, vs the faucet..
  • Includes close to 78 in. of tubing so you'll have plenty of clearance from your Keg to your bottling area..
  • Included valve hooks right up to the Tapcooler and is to open and close as you fill your bottles..
  • Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling!.
Check Stock

Keg Charger Mini CO2 Regulator - PERA Brand 0-30 PSI Beer Keg Mini Charger with 3/8 thread for Home brew Beer Kegging

  • Portable size and Lightweight Construction allows you bring to any outdoor barbeque, party and also easy to store in your fridge.
  • Keg Regulator with 3/8" thread adapter, connect ball lock disconnect mfl or pin lock disconnect mfl.
  • Widely Use,the keg charger for charging and dispensing homebrew beer,kombucha, cold brew coffee, seltzer water, iced tea,and any other beverage.
  • 0-30 PSI gauge on regulator is accurate and accepts different sizes of CO2 cartridges, but please note it not be used with higher pressure argon or....
  • Quality Guarantee, any problem for the regulator, money back or replacement guarantee..
Check Stock