ReviewsPin Valve Sleeve Camshaft

Camoo Rocker Arm Remover Installer & Valve Spring Compressor Tool for Chrysler, Dodge, Jeep 3.7 & 4.7L Replace OE# 3747-123 10102 8426 8387 8516A

  • APPLICATION -- For use on Dodge, Jeep, and for Chrysler 3.7 and 4.7 liter engines (partial listing below), this tool works on 1999 - 2013..
  • FUNCTION -- This special rocker arm remover must be used to allow removal of the camshaft, rocker arms and hydraulic lash adjusters in 4.7 Liter Engines. The valve spring tool allows access at the valve keeper so a magnet can be used to remove it..
  • BENEFITS -- It's a specialty tool to remove and install rocker arms safely without damage to the camshaft or camshaft lobes..
  • REPLACE OEM -- Similar to the Miller 10102 that does the job of the 8426, 8387 and 8516A used on 3.7 and 4.7 Dodge engines..
  • SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!.
Check Stock

Complete GY6 Cylinder Head Rebuild Kits with valves, Trkimal 57.4mm 150cc Big Bore Upgrade Kits for 4 stroke 157QMJ Engines Chinese scooter moped parts, GY6 Engine parts Sunl Roketa Peace

  • 【Cylinder Bore】: 57.4mm / Non-EGR Cylinder body.
  • 【Full sets of parts】: Complete parts is suitable for motorcycle maintenance shop, motorcycle parts supermarket and personal use with nice price..
  • 【Apply to】: GY6 4 stroke 125cc/150cc engine for most of chinese scooter, atv and go karts.
  • 【Parts included】:GY6 150cc Cylinder Head Comp, 57.4mm Bore Cylinder Block, Set of 57.4mm Piston Assy, Piston, Rings and Wrist Pin, Full Set of Engine Gasket, 6pins CDI, Ignition coil, DC regulator, relay, A7TC Spark Plug, Set of Intake Manifold and Muffler Bolts, and Exhaust locking ha, Set of 14 Gram roller , Rocker Arms, Valve Seals, Oil Pump Assy with Driving Gear, Camshaft, Camshaft chain 90, belt 835*18*30, Chain adjuster, Oil screen, spring, cover and oil seal, Starter clutch, intake mani.
Check Stock

Superunner Camshaft Bridge Bracket Bushes Mount with Engine Camshaft Control Valve Solenoid Valve 06H 103 144 J 06H103144K For V W Golf Passat Audi A4 A6 Q5 TT Skoda Seat 1.8T 2.0T

  • Condition:100% Brand New Aftermarket Product.
  • Camshaft Bridge Bracket with Solenoid Valve For VW Passat Skoda Audi A4 1.8/2.0T.
  • Camshaft Bracket Bridge :06H 103 144 F 06H 103 144G 06H 103 144 J 06H 103 144H 06H 103 144 H 06H 103 144F 06H 103 144 G 06H 103 144 F 06H 103 144J 06H 103 144 K.Timing Control Solenoid Valve 06H109257A 06H 109 257A 06H 109 257 A 06H109257C 06H 109 257C 06H 109 257 C F-34739203 LH 161206 3575 DE 427000510 427 0005 10.
  • Fit VW Audi Skoda Seat EA888 MK2 1.8T 2.0T Gasoline Engine & Read Fit Engine Code.
  • Fulfillment by Amazon: Camshaft Bridge Bracket with VTS1085 Variable Valve Timing Solenoid Delivered by the Amazon warehouse in the United States.The logistics is very fast.You don't have to wait for a long time.Buy it now and get to your home right away..
Check Stock

NON AFM DOD Kit with Camshaft Lifter 5.3 Head Gasket Oil Pump Valley Cover for 2005-2014 Chevy Silverado Suburban GMC Sierra 5.3L Engine

  • ... Lifters kit for 2005-2006 Chevrolet Trailblazer Ext 5.3L V8, for 2006-2008 Chevrolet Trailblazer 5.3L V8, for 2005-2006 Gmc Envoy Xl 5.3L V8, for 2005 Gmc Envoy Xuv 5.3L V8, for 2005-2009 Gmc Envoy 5.3L V8, for 2007 Gmc Sierra 1500 Classic 5.3L V8.
  • Camshaft kit for 2005-2013 Gmc Sierra 1500 5.3L V8, for 2010-2013 Gmc Sierra 5.3L V8, for 2007-2014 Gmc Yukon Xl 1500 5.3L V8, for 2008-2014 Gmc Yukon 5.3L V8, for 2005-2006 Isuzu Ascender 5.3L V8, for 2005-2009 Saab 9-7x 5.3L V8.
  • NO AFM kit include head gasket, valve cover gasket, valve stem seals, exhaust & intake manifold gasket, front camshaft seal, o-rings, other small gaskets, cylinder head bolts, camshaft, oem gm balancer bolt, non afm roller lifters, lifter trays w/ bolts, front cover gasket set, non afm valley pan cover, high pressure oil pump, camshaft retainer plate gasket.
Check Stock

8MILELAKE Car Camshaft Retaining Tool Kit EN 48383 and EN 46105 Fit for Cadillac, Buick, Saturn, fit for Pontiac, Chevrolet, Chevy 2.8L 3.0L 3.6L

  • APPLICATION: This EWK Camshaft Retaining Tool Kit is a direct replacement EN 46105 & EN 48383. this camshaft holding tool specifically designed to look and function the same as the original camshaft retaining tool on engine..
  • FIT FOR: This camshaft retaining tool set fit for Vauxhall/Opel/Saab/Cadillac/Holden 2.8i, 3.6i V6 engines Suitable for Engine codes: LP1, HFV6, A30XH, Z32SE, Z28NET, Z28NEL, A28NER, B284E, B284L.
  • FEATURE: Plates are oversized to prevent the valve covers being installed should the tools be accidentally left on the engine.
  • DURABLE MATERIAL: Made of premium alloy steel. Designed to firmly lock the camshafts in their required timing position without deformation..
  • PACKAGE INCLUDES: 3pcs x Camshaft Retaining Tool.
Check Stock

Exhaust Camshaft Position Actuator Solenoid - Variable Valve VVT - Replaces 12615873 12602516 917010 - Compatible with Chevy Buick GMC Vehicles & More Trailblazer Envoy Colorado Canyon Rainier

  • Replacement Exhaust Camshaft Position Actuator Solenoid Valve - For VVT (Variable Valve Timing), this actuator located on the side of the valve cover....
  • Compatible Replacement for Chevrolet, Buick, GMC, Isuzu, Oldsmobile, Saab & Hummer H3, H3T Vehicles - With 4.2L, 3.7L, 3.5L, 2.9L or 2.8L engines -....
  • Replaces Part# - 12615873, 12602516, 917-010, 8126025160, 8126158730, 917010 commonly found on Trailblazer, Envoy, Ascender, Bravada, 9-7x or H3....
  • OEM Fit, Quality, Finish - Each camshaft position solenoid actuator is manufactured to the same specifications as the factory actuators. Each actuator....
  • Lifetime Warranty - The actuator solenoid comes complete with a Lifetime Warranty. If the actuator ever fails on your i-280, i-290, Canyon, Colorado....
Check Stock

Michigan Motorsports LS7 Lifters Set of 16 and Guide Trays FITS LS1 LS2 LS3 LS6 LQ4 LQ9 LY5 LY6 LM7 4.8 5.3 5.7 6.0

  • MDS VVT Camshaft, MDS Lifters, Head Gaskets with Bolts.
  • Camshaft 53022372AA has VVT(variable valve timing ) and MDS ( multiple displacement system)..
  • Part# Camshaft 53022372AA, MDS Lifter 53021726AE 53021726AD 53021720AB 53021720AD 53021720AE 53021720BB 53021572AC, Head Gaskets Kit L5701K-16 HB228 CR345HS-C..
  • MDS VVT Camshaft Lifters Kit Replacement for Chrysler 300 5.7 Hemi V8 2009-2019.
  • Replacement for 2009-2010 Jeep Commander.
  • MDS VVT Camshaft Lifters Kit Replacement for Dodge Challenger/ Charger 5.7L Hemi V8 2009-2019.
Check Stock

2 Set VCT Camshaft Timing Control Solenoid Valve Set Fit For Ford 3V 5.4L 4.6L F150 LINCOLN MERCURY 6 PCS 2 Solenoids + 2 Seals + 2 Screws

  • ● The Camshaft Variable Valve Timing Solenoid or VVT Solenoid control the engine's Camshaft shafts on your Ford 5.4L or 4.6L V8 Triton engine. When....
  • ● Replace the following OEM Part number: 3L3Z-6M280-EA.
  • ● Including 6 pieces: 2 Variable Valve Timing Solenoids (Both Left & Right).
  • ● Fit for :2005-2010 Mustang GT w/ 4.6L V8.
  • ● Seals Measure 1-3/4 Inch and Fit Early VCT Systems. Late VCT Systems seal's hole is in the center, Early VCT Systems seal is not in the center,....
Check Stock

Engine Pro Chevy SBC 350 5.7L HP 447/447 Lift Cam Camshaft L-79 327 OEM #3863151

  • ENGINE PRO MC1713 Hydraulic Flat Tappet Stage 3 Camshaft for 1958-1995 Small Block Chevrolet Engines - 262, 265, 267, 283, 302, 305, 307, 327, 350,....
  • Direct Interchange with OEM 3863151, 350HP - 327 CID, L-79, Factory Camshaft. OEM Sound, Fair Idle with Some Lope. Mid Range Torque of 2400-3200 RPM.....
  • Advertised Duration: Intake 290 Exhaust 290, Duration @ .050": Intake 222 Exhaust 222, Valve Lift: Intake 447 Exhaust 447, Lobe Separation: Intake....
  • Great for Mild Bracket Racing When Using Stock Automatic or Manual Transmissions in Engines With 10.25:1 or Less Compression. Computer Modifications....
  • Street or strip, Engine Pro Performance Camshafts simply out perform the competition. Our manufacturing accuracy promotes improved valve train....
Check Stock

Caltric Exhaust Pipe Outlet Spark Arrester Compatible with Honda Trx400 Ex Sportrax 400 2X4 1999-2008

  • Replaces OEM Part # 12100-KCY-670 12191-KCY-672 12200-KCY-670 12251-MBV-013 12310-KCY-672 12391-KCY-671 13011-KCY-670 13101-KCY-670 13111-KCY-670 90601-KA5-000 14000-KCY-670 15410-KF0-315.
  • TOP NOTCH PARTS REPLACEMENT 440cc BIG BORE CYLINDER, COMPLETE HEAD AND PERFORMANCE CAMSHAFT HONDA TRX 400EX.
  • COMPLETE HEAD AND PERFORMANCE CAMSHAFT HONDA TRX 400EX.
  • THIS CAMSHAFT OFFERS 15% INCREASE IN POWER WORKS WELL WITH STANDARD AND BIG BORE KITS UP TO 440cc.
  • 1X PISTON. 1X PISTON PIN. 2X CIRCLIPS. 1X COMPLETE SET OF RINGS. 1X HEAD GASKET. 1X BASE GASKET. 1X HEAD COVER GASKET. 1X CHAIN TENSIONER GASKET. 1X COMPLETE CYLINDER HEAD (POLISHED INTAKE AND EXHAUST PORT) 1X PERFORMANCE CAMSHAFT 1X GASKET MAKER. 1X THREAD LOCK. 1X FUEL FILTER. 1X AIR FILTER 1X OIL FILTER. 1X FREE NGK SPARK PLUG.
Check Stock

LE-JX 6488 SOHC 4.0L V6 Cam Service Timing 7 Tools Kit/Chains,Head Gaskets,Camshaft,Valve Train Repairs Tool Compatible with 1997~2011 Ford 4.0L Explorer/Mercury/Mountaineer SOHC V6 Engines

  • -Fitment: Compatible with 1997~2011 Ford 4.0L Explorer/Mercury/Mountaineer SOHC V6 Engines..
  • -Function: cam service timing tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs..
  • -Superior Steel: It is made of high quality heavy duty steel with black finish and meets the original specifications..
  • -Includes 7 Tools: 6478 Ford Camshaft Gear Holding Tool,6479 Ford Crankshaft Holding Tool,6480 Ford Camshaft Holding Tool Adapter,6481 Ford Camshaft Holding Tool,6482 Ford Camshaft Gear Holding Tool Adapter,6484 Ford Timing Chain Tensioner Tool,6485 Ford Camshaft Gear Bolt Socket & Extension..
  • -Great Service Support: Our offer comprehensive pre-sales and after-sales service for this tools.If you have any questions,please contact us right now..
Check Stock