ReviewsPin Xlr To Inchs

TISINO XLR Female to 1/4 Inch (6.35mm) TRS Jack Lead Balanced Signal Interconnect Cable XLR to Quarter inch Patch Cable - 15 Feet

  • This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 1/4" TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications..
  • High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound..
  • Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise..
  • The XLR connector is a high quality metal shielded type with positive locking into the microphone.
  • The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability..
  • XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..
Check Stock

TISINO XLR Female to 1/4 Inch (6.35mm) TRS Jack Lead Balanced Signal Interconnect Cable XLR to Quarter inch Patch Cable - 3.3 Feet

  • This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 1/4" TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications..
  • High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound..
  • Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise..
  • The XLR connector is a high quality metal shielded type with positive locking into the microphone.
  • The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability..
  • XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..
Check Stock

Your Cable Store 100 Foot XLR 3 Pin Male/Female Microphone Cable

  • 100 Foot XLR Extension Cable (XLR 3 Pin Male to XLR 3 Pin Female).
  • Great Microphone Cable for Studio Recording and Live Sound.
  • Rugged Construction with Metal Connector Casings and 28 AWG Wire.
  • Shielded Cable Reduces Interferance and Excess Noise.
  • 1 Year Limited Your Cable Store Warranty.
Check Stock

Pro Co Low Profile XLR-XLR Microphone Cable - 1 foot

  • Fit for shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, mixer, amplifier, equalizer, limiter, crossover, digital decoders, stage lighting and other devices with 3 pin XLR connectors..
  • The cable exits from the side of the XLR plug and will not block other jacks, making it more tidy. The custom caps are injection molded from high-quality aluminum material, and the shells are custom precision casting with matte metal finish and gold contact pins..
  • Plug A: Original Aluminum 3 Pin Male XLR.
  • Plug B: Original Aluminum 3 Pin Female XLR..
  • Cable Length: 12 inches/ 30cm Sommer SOD-14 audio cable. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order..
  • Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once..
Check Stock

Homaisson 20-Piece 3 Pin XLR Connectors, 10 Male and 10 Female XLR Solder Type Connector Balanced Connectors, Microphone Audio Cable XLR Plugs, Solder Type XLR Adapter Connectors, Zinc Alloy

  • Balanced Transmission - The 3-pin XLR connector features balanced transmission with strong anti-interference ability and long-distance transmission, which can greatly reduce the noise in the signal and bring you high-fidelity sound quality without static interference. These 3-pin male & female XLR plugs will give you the enjoyment of theater-quality sound, an ideal choice for HIFI fanciers!.
  • Prevent Errors in Connection - The 3-pin XLR balanced connectors specify the signal flow direction, which is conducive to preventing errors in connection. The pins are nickel-plated, resistant to corrosion and oxidation, owning excellent conductivity..
  • Reliable Spring Locking - The spring locking design can prevent the connection from being unstable due to contact with the plug, while it doesn’t affect fast plug-in and out, bringing much convenience for daily use..
  • Premium Zinc Alloy & Rubber - The XLR connector consists of a zinc alloy locking chassis and external rubber boot, which is anti-oxidation, wear-resistant, and durable to use. The rubber boot enables an anti-slip grip for easy use..
Check Stock

Tabletop Microphone Adjustable Gooseneck

  • Momentary switch for priority paging & lock down switch for continuous use.
  • 3-Way Toggle Switch, Sensitivity: high-53dB±3dB low-71dB±3dB.
  • Locking Toggle for Continuous Use.Impedance: low-600 ohms high-50kHz.
  • 6” gooseneck extension and 5’ cord.XLR Connector with 5' Coil Cord,Cannon 3 pin XLR male connector.
Check Stock

TISINO XLR to RCA Y-Cable, XLR Female to Dual RCA Adapter Y-Splitter Duplicator Lead Unbalanced Stereo Audio Interconnect Cable -10 feet/3 Meters

  • XLR Female to Dual RCA/Phono Male Plug Y Splitter Cable, this cable would be to allow you to output from a mixer console's XLR male output jack, and connect into the RCA inputs on a separate device, it splits a mono XLR signal into two separate mono RCA lines. (Note: Not left and right channels).
  • Unbalanced Connection - XLR PIN 2 is connected to the center RCA pin, XLR PINs 1 & 3 are connected to the ring of the RCA plug (earthed). This adapter is only available in an unbalanced format, it is not possible to make a balanced RCA to XLR adapter. This is an adapter to let you use an XLR mic/ component on your RCA circuit..
  • High-quality gold plated plug, Spring-style strain relief prevents cables from pulling out, corrosion-resistant, 20 AWG 4N oxygen-free copper wire combined with double shielding for best audio quality, excellent signal quality..
  • Heavy Duty Flexible Rubber Jacket, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response..
  • The XLR connector is a high-quality metal shielded type with positive locking into the microphone.
  • It splits closer to the RCA ends, the distance to the split point is about 20 inches/ 50cm..
Check Stock

NANYI Microphone Cable XLR to XLR Patch Cables, 3-Pin XLR Male to Male mic Cable DMX Cable Patch Cords with Oxygen-Free Copper, 1.6Feet/0.5Meter

  • 1. NANYI XLR Male to XLR Male Microphone Cable is designed for equipments with 3-pin XLR connectors..
  • 2. High adaptability, sophisticated 3Pin XLR Male plugs for more equipment and applications..
  • 3. The XLR Plug Housing for high strength zinc alloy die-casting polished black spray paint, attractive and durable..
  • 4. High Grade Oxygen Free Copper (OFC) for effective EMI and RFI rejection and flexibility..
  • A hassle-free 12-month warranty and friend customer service..
Check Stock

Cable Matters 2-Pack Premium XLR to XLR Microphone Cable 15 Feet, Oxygen-Free Copper (OFC) XLR Male to Female Cord/XLR Cables/Mic Cable

  • Pro-grade microphone cord is designed for microphones or other professional recording, mixing, and lighting equipment with the 3 pin XLR connectors.
  • Convenient and cost-effective 2-pack microphone wire provides spare or replacement XLR cable (XLR male to female cable) to use on a set of microphones or on different systems.
  • Balanced Mic cable XLR with soft PVC jacket is constructed with oxygen-free copper (OFC) conductors for delivering pristine sound.
  • Copper braided shielding of these Mic cables provides maximum cancellation of hum and noise.
  • Polyethylene insulation improves high frequency response. Heavy duty metal connectors with molded strain relief and grip treads increase durability and help easy plugging and unplugging.
  • The Mic cord is compatible with equipment with 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, and stage lighting with an XLR cable port.
Check Stock

Cable Matters 2-Pack Premium XLR to XLR Microphone Cable 6 Feet, Oxygen-Free Copper (OFC) XLR Male to Female Cord/XLR Cables/Mic Cable

  • Pro-grade microphone cord is designed for microphones or other professional recording, mixing, and lighting equipment with the 3 pin XLR connectors.
  • Convenient and cost-effective 2-pack microphone wire provides spare or replacement XLR cable (XLR male to female cable) to use on a set of microphones or on different systems.
  • Balanced Mic cable XLR with soft PVC jacket is constructed with oxygen-free copper (OFC) conductors for delivering pristine sound.
  • Copper braided shielding of these Mic cables provides maximum cancellation of hum and noise.
  • Polyethylene insulation improves high frequency response. Heavy duty metal connectors with molded strain relief and grip treads increase durability and help easy plugging and unplugging.
  • The Mic cord is compatible with equipment with 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, and stage lighting with an XLR cable port.
Check Stock

Cable Matters 2-Pack Premium XLR to XLR Microphone Cable 3 Feet, Oxygen-Free Copper (OFC) XLR Male to Female Cord/XLR Cables/Mic Cable

  • Pro-grade microphone cord is designed for microphones or other professional recording, mixing, and lighting equipment with the 3 pin XLR connectors.
  • Convenient and cost-effective 2-pack microphone wire provides spare or replacement XLR cable (XLR male to female cable) to use on a set of microphones or on different systems.
  • Balanced Mic cable XLR with soft PVC jacket is constructed with oxygen-free copper (OFC) conductors for delivering pristine sound.
  • Copper braided shielding of these Mic cables provides maximum cancellation of hum and noise.
  • Polyethylene insulation improves high frequency response. Heavy duty metal connectors with molded strain relief and grip treads increase durability and help easy plugging and unplugging.
  • The Mic cord is compatible with equipment with 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, and stage lighting with an XLR cable port.
Check Stock