ReviewsPin lug Hose Shank

EZISOE 6x5.5 Wheel Spacers 4Runner Tacoma 6Lug, 2 in 6x139.7mm Forged Wheel Spacers 108mm Hub Bore with 12x1.5 ET Lug Nuts

6×5.5 Wheel Spacrs Spec: 4 PCS 2 inch Thickness per spacer, 6×5.5 Bolt Pattern, Hub Bore: 108 mm, 12×1.5 Extended(ET) Shank Lug nuts. Because of the problem of Amazon unpacking, if you only receive 2pcs, please contact us and we will reissue one set for you.
6×5.5 Wheel Spacer Fitment: compatible with 1996-2022 4Runner, 2007-2020 FJ Cruiser, 2001-2007 Sequoia, 2001-2022 Tacoma(Only 6 Lug vehicle), 2000-2006 Tundra, 2004-2012 Colorado, 2004-2012 Canyon, 2008-2014 Censor, 1994-2003 Passport, 2006-2010 H3.
Benefit of Extended(ET) Lug Nuts: Come with 24 pcs ET Style Lug Nuts, These lug nuts have the same 60° conical seat plus a small 0.300″ long shank that will fit into most Toyota wheels or Aftermarket. This equates to about 6 additional full turns of thread engagement, which will usually allow for safe installation of the wheels.
Benefit of wheel spacers: Imporve Better Handling and Increases the Traction,Solves the Adjustment Problems, Fixes Incorrect Offset and Give you the Aggressive Outlook.
Warranty: We provide 1 year warranty. Easy Bolt-on Installation, No specical Tool Needed.

Check Stock

DPAccessories LCE3L6HCSCH04020 20 Chrome 12x1.5 Closed End ET Spline Tuner Lug Nuts for Aftermarket Wheels Wheel Lug Nut

BEFORE YOU BUY: Extended Thread (ET) lug nuts are a special style lug nut intended for installation on aftermarket wheels only. They WILL NOT fit on factory OEM wheels. Verify fitment with our team before making your purchase..
WILL NOT FIT: Factory OEM wheels or wheels made by the vehicle manufacturer. Not to be used with most wheel spacers..
SPECS: M12x1.50 thread – Closed End ET Spline Tuner Style Lug Nuts – Conical 60 Degree Seat – 39.88mm long – 20.07mm wide – 7.62mm shank length – 15.75mm shank width.
REQUIRES: 19mm and 13/16 in. (21mm) hex spline tool/key part # D5210K for installation and removal. One (1) tool included with this set..
INCLUDES: 20 Chrome Closed End ET Spline Tuner Lug Nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..

Check Stock

DPAccessories 20 Black 14x1.5B Spline Tuner Lug Bolts for Aftermarket Wheels - 27mm Shank BS27K5HE-BK04020

FITS: Aftermarket wheels requiring a lug bolt with a conical 60 degree seat, 27mm shank, and small diameter like spline drive or tuner style bolts..
WILL NOT FIT: Factory OEM wheels or wheels made by the vehicle manufacturer..
SPECS: M14x1.50B thread - Spline Tuner Style Lug Bolts - Conical 60 Degree Seat - 53.34mm long - 20.07mm wide - 27mm shank length.
REQUIRES: 17mm and 19mm hex spline tool/key part # BS-K-HC-CH04001 for installation and removal. One (1) tool included with this set..
INCLUDES: 20 Black Spline Tuner Lug Bolts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..

Check Stock

Maverik TACTIK 2.0 Lacrosse Head UNSTRUNG - White

Easily Mounts To Your Atv Or Utv Hitch Receiver To Provide A Hitch Ball, Winch Strap Loop And ⅝" Pin Hole For Yard Work Equipment, Utility Trailers....
Multi-Hitch Includes A 2-Inch Ball, 2" Shank, ⅝" Pin Hole, 5/8" Hitch Pin And A Bridge Pin.
The Hitch Ball Has A 2-Inch Rise To Give Sufficient Ground Clearance In Most Applications.
Constructed Of Durable, Powder-Coated Steel.

Check Stock

Dixon Valve HA2576 Brass Fire Equipment, Hydrant Adapter with Pin Lug, 2-1/2\ NST (NH) Female x 3/4\ GHT Male

Adapter for connecting hoses, pipes, or fittings of different types.
2-1/2" NST female on one end and 3/4" GHT male on the other for connecting to hose.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Chrome plated for strength and durability.

Check Stock

TOPTOW Trailer Hitch Extender Adapter with 6-inch Riser/Drop, 2" Receiver, 2-inch Solid Shank, 10000lbs Capacity, Anti-Rattle Bolt

★Please check the product dimension before purchase. Extender length: 7" or 9". The 2" shank has two pin holes. ★RECEIVER SIZE: This trailer hitch extension riser has 2 inch by 2 inch industry-standard receiver, fits for most 2-inch shank of ball mounts and hitch accessories. ★ Please tightening the anti-rattle bolt after inserting into the 2 inch shank into the receiver. Recommend to use anti-rattle hitch pin or hitch lock for bike racks or cargo carriers..
★HITCH RISER OR DROP HITCH: 6.25 inch drop or rise can be turned up or down to level the towing system..
★ADJUSTABLE LENGTH: 2 pin holes design makes this drop trailer hitch have 2 active length and avoid interfere with the vehicle bumper.
★SOLID RECEIVER SHANK: Gross Towing Weight: 10,000 lbs. Tongue Weight: 400 lbs. Heavy duty for towing trailer, boat, camper, bike rack, cargo carrier and other tow hitches.
★CORROSION RESISTANT: Made of strong steel with a durable black powder coat finish, super corrosion resistant.

Check Stock

Apache 98128040 2\ x 20' Water Pump PVC Suction Hose

Made in the USA - Suction Hose Length - 20 feet.
Male Camlock Coupling - Aluminum 2 inch (O.D. - 2.480) - Type "E" Shank.
Female Camlock Coupling - Aluminum 2 inch (I.D. - 2.519) - Type "C" Shank.

Check Stock

Nilight Trailer Hitch Ball Mount with 2-Inch Trailer Ball & 5/8″ Hitch Pin Clip Fits 2-Inch Receiver 7500 lbs 2″ Drop,2 Years Warranty

Heavy Duty Trailer Hitch – Offers a gross trailer weight capacity of up to 7,500 lbs and 750 pounds tongue weight, Perfect for towing trailer, campers, hauling motorcycles and ATVs with 2 inch standard hitch receiver.
Product Dimensions – This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount has a 2-inch drop, 2-inch diameter ball and 5/8-inch pin hole.
Corrosion Resistance Finish – Two stage finish using E-Coat pre-coating and high-grade textured black powder coating for long lasting corrosion resistance.
Ball & Pin Kit Included – The loaded ball mount comes with a pin and clip for mounting to the appropriate sized receiver tube.
Easy to Install – To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle’s 2-inch hitch receiver. The rounded shank and included hitch pin make installation easy.

Check Stock

TOPSKY TS2101 Trailer Hitch Pin & Clip, 5/8 Inch Pin Diameter, Fits 2 Inch Receiver

MULTI-PERPOSE: The 5/8 inch diameter of hitch pin is compatible with any ball mount or other trailer hitch accessories with 2-inch shank and 5/8 inch pinhole, making this receiver hitch pin fit for most class 3, 4, and 5 trailer hitches..
SIMPLE CONTROL: The flexibility of this trailer hitch pin makes it easier to use and allows the pin to be safely held in the trailer hitch and ball mount..
CORROSION RESISTANCE: Protected by a durable galvanized coating, these two hitch pin needles maintain good rust and corrosion resistance and trouble-free use each time..
RELIABLE STRENGTH: This 5/8 inch trailer hitch is made out of solid steel for reliable strength, the strength of this solid steel makes you feel safe every time you travel..
EASY TO INSTALL: To install the trailer hitch pin, simply insert the ball mount or other trailer hitch attachment shank into the hitch receiver on your vehicle. After the pins on the side of the receiver tube are aligned, insert the hitch pin..

Check Stock

CURT 45064 Lifted Truck Trailer Hitch Mount with 2-Inch Ball & Pin, Fits 2-in Receiver, 7,500 lbs, 6-Inch Drop, Black

DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup. It is constructed from welded steel and has a hollow shank.
VERSATILE USE. This ball mount has a 2-inch x 2-inch shank and a 6-inch drop, making it great for larger, lifted trucks and Jeeps. It also features a 2-inch diameter ball, 5/8-inch pin hole and 9-1/4-inch overall length.
READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating.
EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and pre-torqued trailer ball make installation easy.

Check Stock

Pump Water Hose - Red PVC Drain Backwash Discharge Hose - Camlock Fittings 2\ x 100'

Male Camlock Coupling - Aluminum 2 inch (O.D. - 2.480) - Type "E" Shank.
Female Camlock Coupling - Aluminum 2 inch (I.D. - 2.519) - Type "C" Shank.

Check Stock