ReviewsPin lug Short Shank

WOLVERINE Men's Manistee Construction Boot, Brown/CAMO, 10

  • Waterproof Oiled Tumbled Nubuck Leather with 900 Denier Nylon.
  • LINING: Breathable Waterproof Membrane with Moisture Wicking Mesh INSULATED: 600G.
  • FOOTBED: Removable EPX Anti-Fatigue MIDSOLE: Ultra-Light Compression Molded EVA.
  • OUTSOLE: Rubber Lug CONSTRUCTION: Cement Construction.
Check Stock

CURT 22323 Anti-Rattle Hitch Pin Shim Device, Fits 2-Inch Receiver, 5/8-In Hole, Black

  • QUIETER TOWING. Enjoy a smoother, quieter ride while towing your trailer with this anti-rattle hitch pin. It is designed to hold the ball mount firmly in place, deterring vibrations and noise.
  • VERSATILE. This trailer hitch anti-rattle fits virtually any 2-inch x 2-inch hitch receiver with a 5/8-inch pin hole. It is compatible with hollow-shank accessories only.
  • HIGH-STRENGTH. For dependable towing strength, this trailer hitch anti-rattle device is constructed from solid steel.
  • CORROSION-RESISTANT. This anti-wobble hitch pin is made to endure the outdoor elements, resisting rain, dirt and other corrosive threats with a durable zinc plating.
  • EASY TO INSTALL. Installing this anti-rattle hitch pin is fast, simple and secure. First, insert the receiver hitch anti-rattle shim into the accessory shank. Then, insert the accessory and thread in the hitch pin and tighten with a wrench.
Check Stock

Stamp LACE Black/Silver/Gum 12.5

  • Match Compound - Crankbrothers flat rubber compound (MC2) is optimized for grip and durability. It has high-friction to stick to the pedal body and low rebound properties to dampen vibrations. The lugs are rounded to resist abrasion..
  • Match Outsole - The tread pattern is designed for traction off the bike. Directionally angled and spaced toe and heel lugs offer traction for hiking up or down steep terrain. The ramped toe provides walkability on steep terrain..
  • Match System - The tread pattern is designed for maximum contact surface and compatibility with the pedal platform. In addition, the lug depth is designed around pin dimensions to absorb the pin body..
  • Closure System - Classic lace closure system offers smooth closure with round laces and a pocket to safely tuck laces..
  • Stamp Specific - On Pedal Area Stamp tread pattern optimized for pedal contact..
Check Stock

Stamp LACE Navy/Silver/Gum 11.0

  • Match Compound - Crankbrothers flat rubber compound (MC2) is optimized for grip and durability. It has high-friction to stick to the pedal body and low rebound properties to dampen vibrations. The lugs are rounded to resist abrasion..
  • Match Outsole - The tread pattern is designed for traction off the bike. Directionally angled and spaced toe and heel lugs offer traction for hiking up or down steep terrain. The ramped toe provides walkability on steep terrain..
  • Match System - The tread pattern is designed for maximum contact surface and compatibility with the pedal platform. In addition, the lug depth is designed around pin dimensions to absorb the pin body..
  • Closure System - Classic lace closure system offers smooth closure with round laces and a pocket to safely tuck laces..
  • Stamp Specific - On Pedal Area Stamp tread pattern optimized for pedal contact..
Check Stock

CURT 45832 D-Ring Shackle Mount Trailer Hitch, Fits 2-Inch Receiver, 13,000 lbs

  • DEPENDABLE STRENGTH. This D-ring ball hitch is constructed from high-strength forged steel and rated for a straight-line pull of up to 13,000 pounds (limited to lowest-rated towing component).
  • VERSATILE USE. This forged trailer hitch ball mount with D-ring comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The shackle features a threaded pin to remove if necessary.
  • READY TO TOW. Recovery towing is easy with this 2-inch shackle mount. It can be used for pulling another vehicle, stumps and other offroad applications.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this D-ring hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

McGard 64029 Black Bulge Cone Seat Style Lug Nut Set (1/2'-20 Thread Size) - Set of 4

  • Bulge lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels..
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Please note that Lug nuts are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your lug nuts require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
Check Stock

CURT 45056 Trailer Hitch Mount with 2-Inch Ball & Pin Fits 2-In Receiver 7,500 lbs 4-Inch Drop

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup (weight capacity may change if trailer ball is removed).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount has a 4-inch drop, 2-inch diameter ball, 5/8-inch pin hole and 8-1/4-inch overall length.
  • READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and pre-torqued trailer ball make installation easy.
Check Stock

CURT 45041 Trailer Hitch Mount with 2-5/16-Inch Ball & Pin, Fits 2-Inch Receiver, 7,500 lbs, 2-In Drop

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup (weight capacity may change if trailer ball is removed).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount has a 2-inch drop, 2-5/16-inch diameter ball, 5/8-inch pin hole and 8-1/4-inch overall length.
  • READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and pre-torqued trailer ball make installation easy.
Check Stock

CURT 45331 Trailer Hitch Mount with 2-5/16-Inch Ball & Pin, Fits 2-Inch Receiver, 15,000 lbs, 2-In Drop

  • DEPENDABLE STRENGTH. Rated to tow 15,000 pounds gross trailer weight and 1,500 pounds tongue weight, this ball hitch offers dependability for your towing setup (weight capacity may change if trailer ball is removed).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount has a 2-inch drop, 2-5/16-inch diameter ball, 5/8-inch pin hole and 8-1/2-inch overall length.
  • READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and pre-torqued trailer ball make installation easy.
Check Stock

McGard 64002 Chrome Cone Seat Style Lug Nuts (M12 x 1.5 Thread Size) - Set of 4

  • For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom..
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Please note that Lug nuts are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your lug nuts require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
Check Stock

Wheel Accessories Parts Set of 20 Chrome 12x1.25 Lug Bolts Locking Spline Conical Seat with 28 mm Shank Length Small Diameter Lug Bolt with Dual Hex Key for Aftermarket Wheels (28mm, Chrome, M12x1.25)

  • 20 Lug Bolts with M12x1.25 Thread, Shank length (thread length): 28mm, 1 dual hex key included.
  • Lug Bolts can be commonly Compatible with applications of many European cars such as BMW, Mercedes Benz, and VW where the vehicles have been designed to use Lug Bolts instead of more commonly used Studs and Lug Nuts..
  • Chrome plated lug bolts have a long lasting, high luster finish. Every lug bolt is double nickel plated to surpass 48 hour salt spray testing..
  • Our lug bolts are forged, not cut from bar stock. Forging allows for better mechanical properties and consistent quality. Our threads are rolled (forged) onto the bolt, not cut like most of our competitors..
  • Our Lug Bolts are made of Carbon Steel and Heat Treated to 10.9 grade. Carbon Steel is an alloy known for its very good form-ability, comparatively high strength, and a very good surface finish.
Check Stock