ReviewsPinch Weld Jacks

2-Pack of Rubber Jack Pads (Slotted Pucks) - Universal, Standard-Size Adapter - Frame Rail Protector Puck / Pad Keeps Pinch Weld, Paint and Metal Safe - by Mission Automotive

  • Protects Your Vehicle And Your Jack -- Our jack pads sit on top of your jacks to provide protection and cushion when lifting your car, both to the sensitive areas of the vehicle itself as well as the jack that's doing the heavy lifting. No more damage to pinch welds, paint scratches or metal damage.
  • Made From High Quality Material, Built To Last -- Made from a blend of purpose-specific, highly durable rubber, our jack pads are built to hold up to the rigorous needs of mechanics and DIY enthusiasts, alike.
  • Fits An Array Of Jacks, Stands And Vehicles -- Our pucks are made to fit a wide array of jacks / jack stands and vehicles. Their universal size allows them to meet a wide-array of needs, though exact fit will vary.
  • Value Pack -- Our set includes two jack pads, providing the value you need to get the job done right - without sacrificing quality..
  • Dimensions -- Pad dimensions: 7.2 cm / 2.8 inches in diameter, 3.3cm / 1.3 inches tall. 2 per pack.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

Fulton 500320 XP to F2 Adapter Kit for F2 Swivel Mount with 4' Frame

  • Fulton F2 Jack Adapter Plate allows you to upgrade from a Fulton Center-Bolt Swivel Mount Jack to an F2 Series Marine and Recreational Jack.
  • Fits Fulton's patented center-bolt design - used on XP10 and XP15 weld-on jacks.
  • Heavy-duty, cast aluminum mount is tapered, moving wheel closer to center line of trailer frame to optimize castering performance.
  • installs easily - no drilling or welding required.
  • All necessary mounting hardware and complete installation instructions included.
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Pair of Trailer Stabilizer Jacks Telescoping RV Camper Accessories for Travel 450kg 1000 Lbs Capacity Each

  • Each trailer stabilizer jack: Extended height: 18".
  • Retracted (collapsed) height: 11-1/2", static load capacity: 1000 lbs, lift capacity: 650 lbs, which helps to keep your trailer level and stable..
  • Design：design of telescoping structure, strong and easy to bolt or weld, suitable for RV trailer camper stabilizing leveling.
  • Product surface: black environmentally friendly electrophoretic paint, not easy to rust.
  • Reminder: you will need to supply your own mounting hardware: four 3/8" bolts, but the mounting holes are pre drilled..
Check Stock

GripperX Headphone Plug Extraction Tool with Key Ring and Cleaning Brush - Remove Broken Headphone Plug from Headphone Jack of Mobile Devices

  • NO GUARANTEES: This tool comes with no guarantees implied or expressed and should be considered a single-use tool..
  • PURPOSE: GripperX is designed for the purpose of extracting a headphone plug that has broken apart, leaving the tip of the plug lodged inside the headphone jack of a mobile device..
  • HEADPHONE JACKS: Designed to be used on 3.5mm jacks found on phones, laptops and smaller devices..
  • HOW TO USE: Insert GripperX between headphone jack housing and broken plug. You may need to lightly tap it in. It should go in about the same length of the headphone plug. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove. Restore functionality to your device's headphone jack..
  • USE WITH CAUTION: Rotating or inserting too far may damage the device. The opening is sharp and may cause harm to your fingers. We recommend using gloves and pliers when handling this tool..
Check Stock

Homeon Wheels Stabilizing Jack Pads for RV, Camper Leveling Blocks Help Prevent Jacks from Sinking ,6.5''X 6.5'' (Pack of 4)

  • BIGFOOT featured 12"x7.5" super large foot plate, add super stability! no need to add pad yourselves..
  • Includes 2 steel jacks, 1 crank handle, and include a 3/4" hex magnetic socket to raise/lower jack faster by power drill, also include 8 pcs 3/8" self taping mounting screws and matching 9/16" socket for easy install !.
  • Capacity: 5,000 lbs per jack, bolts or weld on.
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Yunpo Butyl Sealant Tape 4M/13Ft Waterproof Butyl Rubber Sealant for Car Headlamps Window Door Windshield Butyl Tape Black

  • ★Butyl Sealant Main Application: Butyl rubber tape is suitable for the shock-absorbing paste of windshield, door waterproof film,decorative parts,car lamp,bus body and frame,as well as the sealing of body seam and flange plate.
  • ★Excellent Sealing：Our Butyl rubber sealant features excellent sealing adhesion,butyl tape can be sticky to any type of metal, concrete,glass,plastics and porous surfaces,no worries for falling off.Easy installation and removal.
  • ★Easy To Use: Simply release the butyl sealant from paper and press it sufficiently around the pinch weld.And after removing headlamp cover, the weld areas should be dry,clean,free from dust,oil and grease.Butyl rope prevent leakage,corrosion,deformation,vibration, weather and aging.Non-toxic,tasteless,pollution-free,easy to use.
  • ★Black Butyl Tape: Rubber Sealant is a non-drying,non-hardening synthetic rubber based butyl rubber sealant. It will remain permanently sealing and waterproofing,high viscosity,elasticity and tightness.
  • ★Butyl Windshield Sealant Size: Butyl sealant Diameter: 7-10 mm, Length: about 4 meters. It is long enough for re-sealing about 2 or 4 headlight assemblies,easy to cut to fit for your need.
Check Stock

Yunpo tech Jack Pads Universal Trolley Floor Rubber Jack Disk Pad Adapter Rubber for Pinch Weld Side(2-Pack)

  • ★Jack Pad Application: This Universal Jack Pad Adapter used to protect the undercarriage metal jack point railing that is on most vehicles, fits various Domestic USA, Japanese, and European Vehicles.
  • ★Protect Your Car: Durable and resistant to damage, it will keep the chassis rails from getting pinched, bent, and broken.Prevent your frame rail pinch welds from bending when using a jack to lift your car.
  • ★Load Bearing Design: Designed to be sturdy enough to support your lift point while soft enough to preventing crushing the contact area.
  • ★Extra Grip: When lifting the car,the rubber pad adds extra grip, reduces slippage and stabilizes.Suitable for car maintenance repairment.
  • ★Stand Jack Pad: Great for DIY vehicle maintenance or taking one with you in the car as some tire shops do not use these pads,and unfortunately bend your pinch/scrape off paint on the welds. This can eventually lead to rust, save yourself the hassle with this simple product.Fits most vehicles and floor jacks, please ensure fitment by checking listed dimensions.
Check Stock

15FT Butyl Rope Butyl Rubber Sealant Tape for RV Car Headlamps Window Door Windshield, Black Waterproof Butyl Seal Tape- 3/8" X 15'(4.5m)

  • 【FUCTION】Rubber Sealant have super strong waterproof. Reduce the noise and wind when you drive your car at high speed..
  • 【EASY TO USE】Simply release the sealant from paper and press it sufficiently around the pinch weld.And after removing headlamp cover, the weld areas should be dry,clean,free from dust,oil and grease.Butyl rope prevent leakage,corrosion,deformation,vibration, weather and aging.Non-toxic,tasteless,pollution-free,easy to use..
Check Stock