ReviewsPinewood Derby Graphite Axles 4

Firebird Pre-Cut Pine Derby Car Body

  • Made from Official BSA car block so it meets all pinewood derby specifications.
  • Pre-cut Pinewood Derby Car body only requires minimal sanding.
  • Two pre-drilled 3/8" holes in the rear of the car for cylinder weights.
  • Aerodynamic shaped Firebird pinewood derby car body.
Check Stock

Red Dirt Derby Pinewood Derby Weight Drilling Tool with 3 oz Tungsten Weights

  • Tungsten weight set and drilling tool for easy, precise weight placement in pinewood derby cars.
  • Drilling tool eliminates need for a drill press and precision measurement tools.
  • Tungsten weights offer superior density and maximum speed for pinewood derby car racing.
  • Drilling tool fits pinewood derby car bodies up to 1.75” wide.
  • compatible with 3/8” and 25/64” drill bits.
  • Kit includes (1) T-Tool weight placement tool, (5) ½ oz weights, (1) ¼ oz weight and (2) 1/8 oz weights.
Check Stock

Derby Worx Pro Axle Guide | BSA Speed Axles | Maximum Velocity Pinewood | Essential Tool for Pine Derby Car Kit

  • Precision machined and polished Pinewood Car Axles.
  • Bent 2.5 degrees to enable steering (rail riding).
  • Increased diameter to reduce wheel wobble.
  • Graphite to reduce friction and increase speed.
Check Stock

Derby Worx Pro Rail Rider Tool Compatible with Pinewood Derby Cars

  • bent polished pine derby axles (2 axles), bent 2.5 degrees for steering or canting wheels.
  • Convenient Easy Turn screw driver slot so you can easily turn the axle without damaging it..
  • Pine derby polished axles with burrs and crimp marks removed, head angled minimizes friction.
  • Two (2) Official axles from the official scout kit.
  • Pre-bent BSA axles with Easy Turn screw driver slot saves cost of an axle bender tool and pliers.
Check Stock

Pinewood Pro Bent Pine Derby Official Axles - Polished 2.5 Degree Bend with Easy Turn Screw Driver Slot 2 axles

  • bent polished pine derby axles (2 axles), bent 2.5 degrees for steering or canting wheels.
  • Convenient Easy Turn screw driver slot so you can easily turn the axle without damaging it..
  • Pine derby polished axles with burrs and crimp marks removed, head angled minimizes friction.
  • Two (2) Official axles from the official scout kit.
  • Pre-bent BSA axles with Easy Turn screw driver slot saves cost of an axle bender tool and pliers.
Check Stock

Maximum Velocity Pinewood Car Axle Pliers | Essential Tool for Your Derby Car Kit |

  • REMOVE AXLES WITH EASE - Removing axles without damaging something used to be quite a chore..
  • AXLE PLIER DESIGN - The curved and grooved jaws of the Axle Extraction Pliers provide strong but even gripping power on the axle head..
  • FOR USE WITH - BSA, Maximum Velocity, PineCar, RA's and Awana wheels and axles in derby car kits..
  • HERE TO HELP - Maximum Velocity has been serving the Pine Derby Car community for 20 years. All our products are tested and proven to help you reach....
Check Stock

Speed Axles for Pine Derby Wood Car for Rail Rider™ Axle Kit 4x Axles by Derby Dust®

  • Scout Spec Pine Derby Axles Nail - Straight, no crimps, burr free - ready to race..
  • Axle kit (4x axles) that contains: 2x2.5 degree axles, 1x1.5 degree angles, 1x straight axle.
  • Rail Riding is consider one of the fastest setups you can have for a wood derby car.
  • Will pass magnet test, beveled tapered head to ensure minimal surface friction.
  • See our YouTube Channel: DerbyDust to leave them in the dust.
Check Stock

Maximum Velocity Pine Derby Car Tool | Derby Car Center of Gravity Stand | Accurately & Easily Measure COG for Pinewood Car Kits

  • FORGET THE PENCIL & RULER - Use our Center Of Gravity (COG) Stand to accurately measure and adjust the balance point of your pinewood car (COG tool only, car is not included)..
  • VALUABLE DERBY CAR TOOL - The built in ruler simplifies the process of finding the exact balance point of your derby car. This is a key building component of your pinewood car build (COG tool only, car is not included)..
  • QUICK ASSEMBLY - Snap in a few parts and you are ready to find the center of gravity for your derby car. Easy to follow instructions included (COG tool only, car is not included)..
  • HERE TO HELP - Maximum Velocity has been serving the Pine Derby community for 20 years. All our products are tested and proven to help you reach Maximum Velocity!.
Check Stock

Metal Magery Lead Shot Balls #7.5 2lb Bag of 7 1/2 Lead Shot BBS for Reloading and Adding Weight

  • Add Weight to Projects: These small lead metal balls are perfect for adding weight to a multitude of hobby projects. Perfect way to add weight to trains railroad cars and locomotives, pinewood downhill derby cars, clocks and any other projects that require added weight. The small size of the shot helps fill small and oddly shaped locations..
  • High Quality Lead: Magnum lead shot is harder and slightly less dense than chilled lead shot. Containing 3-5% antimony, Metal Magery Lead Shot will retain its spherical shape..
  • Cleaning Items: Good for cleaning rust or dirt off items. Drop into a container with the items you want to clean and shake the container until the items are clean..
  • Reduce Vibration: Perfect for reducing vibration in Motorcycle handlebars..
  • Dimensions: 2lb Bag | Material: Graphite Coated High Antimony Magnum Lead(American Standard).
Check Stock

Bent 2.5 Degree Pine Derby Axles - PRO Polished Nickel Plated Graphite Coated for Rail Rider Cars and Canting Axles to Reduce Friction 2 Axles

  • Pre bent 2.5 Degree machined PRO axles with graphite coating minimizes friction (2 axles).
  • PRO axle is polished nickel plated and graphite coated to minimize friction. Axle head is not coated..
  • Two grooves cut in shaft to reduce friction and wheel wobble, plus act as a graphite store..
  • Convenient Easy Turn screw driver slot so you can easily turn the axle without damaging it..
  • they are not the nails from the BSA kit. Check your rules!.
Check Stock

2.5 Ounce Incremental Car Canopy Weights Tungsten Weight Compatible with Pinewood Car Derby Weights

  • Size: derby canopy weight's top is 1-1/2 inch in length, 1-1/16 inch in width, 1/4 inch tall.
  • Make precise placement of weight in your car for adding....
  • Feature of tungsten canopy weight: the density of tungsten is higher than other metals, which allows you to pack more weight in your car and gives....
  • Application: tungsten weight top is rounded, bottom is 3/8 inch diameter cylinder stud and 1/4 inch tall.
  • Use standard 3/8 inch drill bit to drill the....
  • Material and quantity: package includes 1 piece 2.5 ounce canopy shaped tungsten weight for pinewood car derby.
  • Simple assembly: canopy weight bottom is 3/8 inch diameter cylinder stud (standard drill bit size), this cylinder part will easily slide into your....
Check Stock