ReviewsPinion Gear Set

Traxxas 1/10 Slash 2WD TITAN 12T BRUSHED 550 MOTOR & 19T PINION GEAR

Titan 12 T 550 Motor (Part # 3785) Includes Two (2) Capacitors and Two (2) Leads with Connectors Specifications Can Diameter: 1.25" (38mm) Shaft Diameter: 0.12" (3mm) Length Including: Shaft 3.2" (81mm) Length Not Including Shaft: 2.3" (57.5mm) Input Battery Voltage: Up to 8.4v Pinion Gear 19T (48 Pitch) with Set Screw (Part # 2419)Buyer agrees to contact manufacturer for all warranty replacements. No term warranty provided by Dollar Hobbyz. No liability shall b.
Includes: Titan 550 12T Motor (Part # 3785) 48P 19T Pinion Gear w/Set Screw - Steel (Part # 2419) - This product is NEW in OEM Retail Packaging..
Important Note: The first image is for illustration purposes only. Please refer to the product description for exact contents..
Requires Assembly: This product is NOT ASSEMBLED. Any assembly pictured is for illustration purposes only..
Part number(s) included (in factory packaging): 3785 2419.

This kit uses Koyo bearings and races along with all high quality small parts.
Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush.
USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set.

This kit uses Koyo bearings and races along with all high quality small parts.
Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush.
USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set.

this kit uses koyo bearings and races along with all high quality small parts.
kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush.
usa standard gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set.

...x with #2216 4-Channel Receiver. Battery: 7-Cell Hump 3000mAh NiMH with Traxxas High-Current Connector and iD Auto Battery Identification that Allows Traxxas iD Equipped Charg.
Includes: (1) Stampede Chassis with Oil-Filled Shocks (1) 550 Motor (1) XL-5 ESC (1) Body (4) Tires (4) Foam Inserts (4) Wheels (1) 19 Tooth Pinion Gear (1) 23 Tooth Pinion Gears (1) 86 Tooth Spur Gear (1) TQ 2.4GHz Radio with Waterproof Electronics (1) 7-Cell Hump NiMH 3000 mAh Battery (1) 4A DC Car Charger Illustrated Instruction Manual.
Specs: Length: 16.25" (413mm) Width: 13" (330mm) Height: 9.5" (241mm) Weight: 2.98lbs (1355g) Approx. Wheelbase: 10.75" (273mm) Front and Rear Tread: 10.5" (266mm) Side-to-Side at Wheel Centers Front and Rear Track: 12.75" (324mm) Side-to-Side at Wheel Edges Ground Clearance: 2.4" (60mm) Gear Ratio: 4.5:1 with Stock 19T Pinion Gear 3.7:1 with Optional 23T Pinion Gear.
Part number(s) included (in factory packaging): 36054-1.

this kit uses koyo bearings and races along with all high quality small parts.
kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush.
usa standard gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set.

Kit includes: 2 x 105-3040 Pinion gears, 2 x 65-2720 Retaining Clips, 4 x 105-6840 Thrust Washers, 2 x 39-9650 Compression Springs, 2 x 612066 Keyways.
Works with Toro rear wheel drive recycler mowers with rear pinion gear part number 105-3040.
PLEASE NOTE: Check your owner's manual to be sure 105-3040 is the correct replacement part for your model..

compatible with 32-pitch, motor gear diameter: 45mm/1.77inch.
inner diameter: 11.9mm/0,47inch, replace for 3956.
【15T/17T/19T pinions】Inner diameter: 5.0mm/0.196inch, come with a 3.175mm coupler to convert 3 pinions apertures to 3.175mm/0.125inch. Suitble for....
【Application】The gear kits compatible with Traxxas Slash 4x4 4WD/2WD/VXL Rally/Stampede 4x4 VXL /Traxxas 1/10 Summit/Trxxas 1/10 E-REVO/T-Maxx.
【Material】Made of high-strength hardened steel, increased wear resistance and last longer life, M4 set screw has been added to each pinion gear....
【Free Style】The speed depends on your gear ration. We provide 3 different teeth pinion gear(15T/17T/19T) to make you more choice in gear ration.

yukon ring and pinion sets give you the confidence of knowing you're running gears designed for the harshest of conditions.
whether it's on the street, off-road, or at the track.
yukon ring and pinion sets deliver unrivaled performance and quality.
yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up.
all yukon ring and pinion sets come standard with a one-year warranty.
this product is used in a 4.88 axle ratio.

USA Standard ring and pinion sets are the right choice to add confidence to your install.
USA Standard Gear offers a full line of ring and pinion sets for a variety of common and hard to find applications.
USA standard gear offers a standard one year warranty against defects on their ring and pinion sets.
This product is used in a 4.11 axle ratio.