ReviewsPipe Clamp Fittings

SharkBite U860O300 Oxygen Barrier PEX Pipe 1/2 Inch, Orange Heat Radi, 300 foot coil

PEX RADIANT TUBING: Flexible oxygen barrier pipe tubing for radiant floor and hydronic heating applications.
Minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
FLEXIBLE PEX PIPE: Expands and contracts with temperature changes and is freeze resistant.
PUSH-TO-CONNECT: Use with SharkBite plumbing fittings or plastic barb and brass barb fittings using PEX crimp tool or clamp connections.
RESIDENTIAL and COMMERCIAL: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
MADE IN THE USA: Manufactured and tested in the USA.

Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....

Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

21 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 34” Longest Length (not including fittings) x 9” x 16” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....

Check Stock

PEROMI 170 Pcs Single Ear Hose Clamp 11 Sizes 1/4-1 Inch Stepless Stepless Cinch Rings Crimp Assortment Kit for Water Pipe Plumbing and Automotive Use

[Include Size]This fuel line clamp kit set comes with 7 common sizes: 6-7mm, 7-8.7mm, 8.8-10.5mm, 9.6-11.3mm,9.8-12.3mm, 12-14.5mm, 13.7-16.2mm,15.3-18.5mm, 17.8-21mm, 20.3-23.5mm, 22.4-25.6mm,all size of tube clamp packed in a sturdy convenient case, can be used for a storage box..
[Premium Quality] High precision single ear stepless hose clamps are Made of 304 Stainless Steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties, a good choice for long-term use.Hose clamps are used to seal various types of hoses..
[Leak-Proof] These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using..
[Easy to Use] The slide the clamp ring onto the pipe, push the pipe onto the fitting and squeeze it with a clamp tool. Provide a firm, leak-free and reliable crimp joint connection..
[Application] Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc. Providing a strong and reliable crimp fitting application..

Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....

Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male ....

Check Stock

8 Size Heavy Duty Ratcheting Hose Clamp 6.1-26.1mm Adjustable Speedy Double Snap Grip Nylon Plastic Hose Clamp 68PCS Black

【Widely Application】This hose clamps set total include 68pcs 8 size black double gripping hose clamps, Perfectly used for air hose, water pipe, automotive fuel line, silicone hose, etc. which are edges smooth will not hurt the pipe, perfect for various silicone/ vinyl tube/ hydrofarm hose fittings..

Check Stock

TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor

【 3/4" INCH ELBOW TEE COMBO PACK 】Our industrial pipe fittings 3/4 malleable iron threaded elbow/tee combo/pipe flange pack provides you the great floor flange pipe fittings at a reasonable price. Malleable cast iron pipe fittings can decorate your home or store more elegant and functional..
【 PIPE INDUSTRIAL DECOR 】You can use these black malleable pipe fittings to install durable iron frame for your pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, wall lamp or other industrial home decors. When you prefer an industrial, steampunk, vintage, retro, factory look, our decorative black pipe fittings are the way to go. Threaded pipe fittings are built to fit your household with an industrial, rustic style. Our black steel pipe fittings will definitely satisfy you..
【 EASY TO INSTALL 】These metal cast pipe fittings are threaded, just screw the threaded rods or pipes to the tees and elbows and they will hold forever. No screws needed to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of bl....

Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....

Check Stock

30 Pcs 1/2 Inch Brass PEX Fittings with 100 Half Clamp J Hook with Nail Black Pipe Supports PEX Mounting Bracket Coupler Crimp Fittings for PEX Tubing Fitting Connection (Elbow, Tee, Straight)

Extensive Usage: these PEX tubing clamps are suitable for copper crimping ring system, plastic or rubber hose, PEX crimping tool and brass crimping accessories, also nice for hot or cold water systems, nice combination to meet your needs in different applications.
Easy to Install: this brass PEX fittings kit can be installed without flame, flux or glue, which can help you save time and energy, simple and convenient to use, and can provide a nice using experience for you.
Size Details: the crimp PEX fittings are compatible with crimping or cinch type rings and connectors.
The adjustable size range of black pipe supports with nail is about 10-14 mm/ 0.39-0.55 inch, please choose the right size before ordering.
Solid and Sturdy: these PEX pipe fittings are made of quality brass, safe and stable, solid corrosion resistance, high temperature ductility, waterproof and oilproof, which can be applied for long time.
Nice Combination: you will receive 30 pieces of 1/2 inch brass PEX fittings, including 10 elbow, 10 tee and 10 straight coupler crimp fittings, 100 black half clamp j hook with nail, sufficient quantity can easily meet your daily use and replacement needs.

Check Stock

Quickun 10Pcs 2\ Stainless Steel Hose Clamp Worm Gear Clamps Adjustable 1\-2\(27-51mm) Range, Fuel Line Clamp for Water Pipe, Hose Clips, Automative and Mechanical Application

【Wide Hose Clamp Size:】 In this Set, The range of clamp we provide is 1"-2"(exactly 27-51mm), that is easy to storage and carry..
【Durable Quality:】 All the hose clamps including the band, housing and screw are made of stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
【Adjustable Style:】 All the hose clamps with screws, you can adjust the size according to the diameter of the pipe, clamps are flexible and ductile, so you can install and remove them at any time. The range of clamps represents the minimum and maximum sizes they can be adjusted..
【Save Time and Money:】These stainless steel hose clamps can be attached on hoses pipe joints to fittings to prevent liquid leakage, saving your time and money on costly repairs the pipe..
【Function and Use:】These clamps are locking secure and tight, widely used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply for automotive, industrial, marine, shield, household etc..

Check Stock