ReviewsPipe Clamp Thermometer Hvac

Testo 550s Kit I App Operated Digital Manifold for HVAC and Refrigeration with 2 x Wired Temperature clamp Probes I High and Low Side Pressure Measurement, Superheat and subcooling – with Bluetooth

  • Efficient: The testo smart probe set offers precise measurements and calculations for heating and cooling systems, making it ideal for all HVAC/R contractors and technicians.
  • Complete Set: Includes two testo 115i pipe-clamp thermometers and two testo 549i high pressure gauges, as well as a protective hard-shell case with precise-fit compartments.
  • Testo 115i: With a grip of up to 1.5”, the wireless thermometer provides quick and reliable temperature and flow and return temperature measurements in pipes.
  • Testo 549i: The pressure meter enables accurate readings for high and low pressure. The 45-degree connector simplifies servicing and troubleshooting – without the need for hoses.
  • Smart App: The free testo Smart Probes App is a powerful tool that allows you to remotely read and log measurements and create custom reports which can be saved and shared.
Check Stock

Yellow Jacket 46060 - Digital Series 41 Series Manifold

  • Efficient: With over 60 refrigerant profiles, automatic superheat and subcooling calculations as well as precise pressure and temperature....
  • Three Hoses included: This kit includes 3 high quality hoses in blue, red and yellow, each 5 ft. long, ¼” SAE (straight and 45° angle) and....
  • 552i Micron Gauge: The testo 552i achieves precise deep vacuum measurements down to single digit resolutions and provides notifications when the....
  • 115i Thermometer: Thanks to a grip of up to 1.5”, the wireless pipe clamp thermometer provides quick and convenient temperature and flow and return....
  • Smart App: Take advantage of clearly visualized documentation from a smartphone or tablet. Remotely operate service and maintenance tasks and send....
Check Stock

Pipe Clamp K-Type Thermocouple Probe, Measures temperature range -40 to 392 °F(-40 to 200 °C), Yellow, Hti-Xintai

  • This probe is able to maximum measure surfaces up to 200°C (390°F)..
  • Spring-loaded jaw for secure grip on pipes from 0.25" (6.35mm) to 1-3/8" (up to 3.5 cm) diameter..
  • The cable extends 38" (98cm) from the handle to the thermocouple connector with the meter..
  • Works with any Multimeter, Clamp Meter, and a Thermometer that accept a type K temperature probe..
  • Reliable measurements for HVAC and environmental testing..
Check Stock

Fluke 116 HVAC Multimeter, Standard

  • Built in thermometer for HVAC applications.
  • LoZ: helps prevent false readings due to ghost voltage.
  • Large white LED backlight to work in poorly lit areas.
  • Resistance, continuity, frequency and capacitanceDescriptionFor the complete solution to HVAC troubleshooting the extra value-packed HVAC Technician's Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case..
Check Stock

Fluke BC-7240 Battery Charger/Eliminator, For 75X Documenting Process Calibrator

  • Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in HVAC/R systems and manufacturing, electrical, and industrial environments.
  • Measures temperature from 40 to Plus-550 degrees C ( 40 to Plus-1022 degrees F) with an accuracy of plus or 1 degree C (plus or 2 degrees F) for the infrared sensor and an accuracy of plus or 2 degrees C (plus or 4 degrees F) or 1 percent of the reading, whichever is greater, for type K thermocouple input.
  • 12:1 infrared distance to spot ratio with laser sighting for pinpointing the measurement area.
  • Included type K thermocouple pipe probe wrapped in flexible hook and loop fastener with a 20 inch cable takes contact measurements from 0 to 100 degrees C (32 to 212 degrees F).
  • CE mark indicates compliance with applicable EU directives.
Check Stock

PONY 50 Clamp Fixture for 3/4 Inch Black Pipe

  • features crank-type handle and 1-3/4-inch square clamp faces.
  • Hardened steel construction with baked enamel fish with no holes, rivets, or notches.
Check Stock

Decomust 17.5'' X 17.5'' (Inner size 16X16'') Stainless Steel Shower Niche Modern and Elegant Design, Easy to Install, Perfect for Shampoo and Soap Storage (16 inches, Chrome)

  • DURABLE AND LONG-LASTING: The air-conditioning drain tray is made of thick stainless steel, which is sunscreen and antifreeze-proof. It can easily surpass the traditional plastic tray and will not rust, corrode or crack..
  • KEEP IT CLEAN AND TIDY: use the water tray to collect and capture the water released by the air-conditioning unit to prevent dripping water from causing damage to the air-conditioning equipment and surrounding buildings..
  • THOUGHTFUL DESIGN: the drip tray is designed with a drain port, and a clamp is used to tightly fit the water pipe with the outlet without leakage, collect the dripping water and safely discharge all the collected water..
  • MULTI-PURPOSE DRIP SOLUTION: Suitable for your system size: The air conditioning drain tray is suitable for condensate from different brands of AC units, window air conditioners, HVAC systems, and evaporator coils..
  • DRAINAGE KIT: The drainage tool set includes: 1 stainless steel tray, 2 meters of water pipe, 1 clamp, and 1 meter of iron wire.
  • side mounting holes, which are installed on the air-conditioning unit through the iron wire, which is easy and firm to install..
Check Stock

52pcs Cable Clamps Assortment Kit 6 Sizes 1/4\ 3/8\ 1/2\ 5/8\ 3/4\ 1\ Cable Clamps Rubber Cushioned With Screws 304 Stainless Steel R Style Pipe Clamps Assorted Cable Wire

  • MATERIAL: Clamps are made of 304 Stainless steel material and high quality rubber cushioned. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable..
  • QUANTITY: 12pcs 1/4" (6mm), 10pcs 3/8" (8mm), 8pcs 1/2"(13mm), 8pcs 5/8"(16mm), 8pcs 3/4"(19mm), 6pcs 1" (25mm) and 25pcs Screws M6x20mm. Cable clamp screw hold diameter: 6.5mm, suitable for 6M( 1/4'') screw bolts and nuts to thread.
  • STYLISH DESIGN- The R-Style design makes the clamps stylish, flexible and innovative. Strong and reliable. Easy to twist, bend, manipulate when install..
  • APPLICATION:Cable clamps assortment kit are perfect to apply in automotive, industrial, boat/marine, windshield, household etc. for wiring, cables, pipe, rack, line management and restoration..
  • ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place..
  • 3/4 pipe repair clamp pipe clamp tools pipe clamp tools pipe clamp pipe clamp 1/2 steel cable clamp 1/4 cable clamps 16mm cable clamp 3/4 cable clamp 3/8 cable clamp 3/8 insulated cable clamp cable clamp 1 cable clamp assortment cable clamps 1 inch cable clamps 1/2 cable clamps 3/4 inch cable clamps assortment kit insulated cable clamp lokman cable clamp 3/8 metal cable clamp 3/8.
Check Stock

Pony Tools 50 3/4in. 6 Pack Ajustable Clamp Fixture for Black Pipe

  • Pony 50 Clamp Fixture for 3/4 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
  • Mounts on any length 3/4" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
  • Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
  • Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
  • Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.
Check Stock

Pony Tools 52 6 Pack 1/2in. Ajustable Clamp Fixture for Black Pipe

  • Pony 52 Clamp Fixture for 1/2 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
  • Mounts on any length 1/2" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
  • Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
  • Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
  • Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.
Check Stock

6 Pack 3/4 inch Adjustable Pipe Bracket Clamp, Stainless Steel Wall Ceiling Mount Pipe Support Pipe Hanger Clamp, Split Ring Hanger ID 15mm-19mm

  • 15-19mm Pipe Strap Clamp: The Pipe Clamp fits for 1/2 inch/15mm to 3/4 inch/19mm diameter pipe, the nut is M8..
  • Stainless Steel Pole Clamp: The split ring hanger is made of 304 stainless steel, it durable and offers rust protection..
  • Package included: 6 pack Pipe Bracket Clamp. Length: 2.2 inch/55mm, width: 1.1/ 28mm..
  • Easy to Use: Easy to install, pipe bracket clamp can be installed on the wall or ceiling..
  • Applications: These adjustable pipe support bracket clamp are suitable for both industrial and home applications..
Check Stock