ReviewsPipe Extrusion Machine

RIDGID® 700 41935 Hand Held Power Drive Pipe Threading Machine (Renewed)

RIDGID 700 Power Drive 41935 Pipe Threading Machine (Renewed).
Hand-held power drive pipe threader will thread a variety of pipe..
Heavy-duty, cast-aluminum body provides long operating life..
Pipe Threading Capacity: 1/8 in. to 2 in. (3 mm to 50 mm).
Designed for use with RIDGID 12-R Die Heads..

Check Stock

PVC Cutter, Up to 2-1/2 inch, Ratchet-type PVC Pipe Cutter for Cutting PEX,PVC,PPR and Plastic Hoses,Suitable for Maintenance, Plumber and DIY Home worker (2-1/2\(Gray）)

...tc),Great helper for home handy man, plumbers, electricians, and vehicle mechanics..
【Heavy duty】: The tubing cutter blade itself is made of SK5 material with high strength and hardness. The surface is covered with Teflon coating,high hardness,smooth, sharp,Cutting quickly..
【Ratchet design】: The pipe cutting machine adopts ratchet drive technology, cutting pipe with less effort and improving work efficiency. Pressing the self-locking during use can prevent the cutter from springing back, cutting the pipe faster, saving energy and safety.and the triangular convex point design at the blade can better cut the pipe..
【Ergonomic design】: The bottom handle adopts ergonomic grip to protect the hand, which can make single stroke cutting quickly and easily, Suitable for long hours..
【Safe and convenient for you】: Put the pipe to be cut into the corresponding knife edge, and continuously clamp and tighten the handle to easily cut the pipe. After use, just fasten the safety lock at the bottom, and the pipe cutting machine will become small and easy to carry or store..

Check Stock

LGXEnzhuo Pipe Cutter Pipeline Hydraulic Pipe Cutting Machine Fire Steel Pipe Cutting Machine Can Cut Pipe Diameter 40-280mm 220V 750W

【WIDE APPLICATION】Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
【PARAMETER】Diameter of steel pipe that can be cut:40-280mm.
The wall thickness of the steel pipe that can be cut:3-6mm.
【HIGH EFFICIENCY】Copper motor, power 750W, with high efficiency, stable performance and long service life..
【HIGH STRENGTH BLADE】High strength blade is made of high quality steel to ensure good cutting effect..
【DURABLE】Thicker roller, more wear-resistant.Strong, sturdy frame, suitable for heavy duty operation..

Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
Comes with five roller, which is suitable for cutting pipes of different sizes..

Check Stock

BZ 3D 2 in 2 Out Extruder 12V 40W Dual Color All Metal for 3D Chimera Hotend Kit Multi-Extrusion V6 Dual Extruder 0.4mm/1.75mm 3D Printer Part.(12V Silver)

Chimera is a 2 In 2 Out - Dual Extrusion System. Chimera is a neat and simple way in which to add conventional dual extrusion to your machine in a simple, air cooled package..
Nozzles can be individually adjusted in height for an easy setup experience..
Each nozzle is individually temperature controllable for ultimate material versatility..
Chimera inherits the best from it’s cousins, V6 and Kraken, combining them into a single, reliable, yet highly capable hotend ..
If you have any questions, please feel free to contact us via email. We will reply you within 24 hours and help you solve the problem..

Check Stock

Hydraulic Exhaust Pipe Expander 1-5/8' to 4-1/4' Inches, Exhaust Pipe Stretcher Tool, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

This tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
Collets is made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment. Let it have more hardness and longer service life..
Ten tons of hydraulic pressure expand the pipe quickly for a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
Manual hydraulic pump can be used with split hydraulic products, such as punching machine, cutting machine, bending machine, hydraulic jack, hydraulic puller, split hydraulic clamp, flange expander, split ram and other separate hydraulic equipment..

Check Stock

Polymaker Polysher - Post Processing Device to Smooth Print Surface with IPA Alcohol for PolySmooth PVB 3D Printer Filament & PolyCast 3D Printing Filament

003cbr003e003cb003ePost-Processing Machine 003c/b003e: Polymaker Polysher is a post-processing machine designed for polishing the extrusion-based FDM/FFF 3D printed parts with PolySmooth to achieve a shining, layer-free surface finish..
003cbr003e003cb003eSafe & Easy To Use: 003c/b003e No heating is involved – The nebulizer technology requires only a very small reservoir – It is a liquid-phase polishing rather than vapor-phase polishing process. All electronic components are properly sealed, and no spark can be generated inside the chamber. Placing it on your desk, simply twisting the dial to set the time, the post-process will start and end automatically..
003cbr003e003cb003e Low Costs:003c/b003e The Polysher is not only affordable but its running cost is incredibly low too. Isopropyl alcohol (also known as isopropanol) or Ethanol are both suitable. You can choose whatever is more easily available for you..
003cbr003e003cb003eNOT A 3D Printer: 003c/b003ethe Polysher is NOT a 3D printer. You still need a extrusion-based, FDM/FFF 3D printer in order to use our new products. Specifically, PolySmooth is a new filament that you can print with your 3D printer, just like how you print with your PLA. Once the printing is done, you can post-process your pri....

Check Stock

Automotive Smoke Machine Leak Detector, EVAP Vacuum Leakage Diagnostic Tester with Pressure Gauge & Flow Meter for All 12V Cars

【EVAP SMOKE MACHINE LEAK TESTER】V3 Smoke machine automotive can easily check car sealing, throttle shafts, engine block, turbo test system, crankcase system, intake system, exhaust system, fuel tank system, EVAP system, EGR system, cooling system, various pipe fittings leakage problems. the provided mineral oil creates smoke that’s pumped it through your vehicle’s piping to help you detect the leak’s precise location..
【WHY YOU NEED V3】These Situations - 1.The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke.2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall.3. Air leakage in the vacuum tube will cause the engine to run weakly..
【EASY OPERATIOPN】1.Fill 10ml-20ml test johnson baby oil pink label (the most suitable oil) to the detector.2. Disconnect the intake pipe of the car. Connect the intake pipe of the car with the detector.3. Connect detector with DC12V battery, it starts to work.4.The pipe will be ....

Check Stock

Dante Products Burner Pipe Silver

BLUEROCK CG-211C PIPE GAS CUTTING MACHINE.
Complete Motorized Magnetic Torch Pipe Cutting Kit Includes:.
CG-211C Motorized Machine with power control box and cords.
Complete Torch Head Assembly with standard B-fittings & valves.
Torch Holder Assembly with adjustable straight or beveling angle mount and bars Cutting Tips Qty 3 Acetylene G02 (Assorted Sizes. Similar to Airco....

Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
NTC connector with terminal, easy to intall..
【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..

Check Stock

TAISHER 10PCS Brass Hose Barb Fittings 3/8 Inch to 1/4 Inch Barb Hose, Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel with 20PCS Hose Clamp

[ MATERIAL ] High quality solid brass, firm and durable, brass is corrosion resistant. This pipe fitting can apply to water, air, gas, oil and fuel..
[ HOSE CLAMP ] Worm Gear Hose Clamp with 8mm width adjustable stainless steel band. The extended band liner to protect the hose from damage caused by extrusion. Connection fasteners for water, oil, gas, hydraulic hose..
[ OPERATING TEMPERATURES ] Temperature range from -65 to +250 degrees F..
[Function] Used to connect hoses of different diameters. The hose barb can be firmly connected to the hose, and the hose clamp can form a tight seal on the flexible or semi-rigid hose..

Check Stock