ReviewsPipe Fastening

National Hardware N222-158 2190BC U Bolt in Zinc plated,#526-5/16'x1-3/4'x4-1/4'

  • Authorized Replacement for Stanley Hardware Stock #N222-158.
  • Designed for fastening products to pipe, wood, etc.
  • Suitable for automotive, plumbing and other home and industrial applications.
Check Stock

National Hardware N222-562 DP2190BC U Bolt Zinc plated 5/16 x 2-1/2 x 5

  • National Hardware's 5/16"x2-1/2"x5" U Bolt is designed for fastening products to pipe, wood, etc..
  • Manufactured from steel wire for durability..
  • Plate and nuts included for easy installation..
Check Stock

White Clamp Farm Plastic Clamps Greenhouse Film Row Cover Netting Tunnel Hoop Clip Light Grip ABS Clamp for Greenhouse Plant Supplies (30 Pieces,3/4 Inch)

  • Reliable and sturdy: these white clamps are made of ABS and PC Synthesis materials, which has firm plastic structure and temperature resistant, so these farm plastic clamps are durable, sturdy and resist to break, support for your long-term needs.
  • Good for greenhouse: our greenhouse film clamps are designed for building greenhouses, shelters, quilting frames and more, and they possess front resistant and UV stabilized performance for outdoor use.
  • Package included: comes with 30 pieces of farm plastic clamps in 3/4 inches/ 1.9 cm in width and 3.14 inch/ 8 cm in length, they work on 0.74 to 0.86 inch pipe, please confirm the size of pipe you need before purchasing.
  • Convenient and practical: they could press and hold the greenhouse film on the pipe tightly, provide a strong hold on the film without punctures or adhesives, so you can use these plastic clamps to build your greenhouse easily.
  • Diverse usages: these light grip ABS clamps are suitable for fastening greenhouse film, shade net, quilting frames and more, they are also good choices for building greenhouse, floor covering or other places, so helpful in our daily work and life.
Check Stock

Vent Systems 8 Inch Backdraft Damper - Backflow Shutter - Heavy-Duty Inline Springs Loaded - One-Way Airflow Ducting Insert - Inline Fan Vent Deflector

  • Back draft damper for insertion into 8 inch ventilation ducts. The backflow damper opens and closes automatically. It has a strong spring and can be....
  • A tight sealing and fastening of the duct is achieved by the rubber strip attached to the inside of the draft blocker damper. The rubber seal prevents....
  • Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial....
  • Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves....
  • The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be....
Check Stock

Afterburner Toolhead hub Board Wiring Harness Kit for V2.4 3D Printer Parts Spare Parts Durable Accessories

  • A necessary U-screw combination set for Prus i3 Mini MK3 3d printer, for holding the Y carriage Plate..
  • Lightweight(3.9g/pc), but solid and durable, waterproof, antirust and strong corrosion resistance..
  • Designed for fastening products to pipe, wood, etc. Suitable for automotive, plumbing and other home and industrial applications. Please check the....
  • Package includes: 6 Sets U-bolts and Hex Nuts..
Check Stock

Inside Pipe Cutter, 1/4\ Hex Shank PVC Plumbing Inside Cutter Internal Plastic Pipe Cutter Set (32mm Saw Blades*3, 44mm Saw Blades*1）

  • ...nsion rod (first) - serrated washer - saw blade - flat washer - screw (last). The screws must be tightened and reinforced! Refer to the fourth photo for example~.
  • A set of plumbing PVC pipe internal cutter with 4 saw blades (3 blades with 1.25 inch diameter and 1 blade with 1.75 inch diameter), and two sets of screw fastening parts. Please protect the saw blade. There is a layer of protective oil on the saw blade. Do not mind. Refer to the fourth picture for parts installation sequence..
  • The saw handle is made of heavy-duty carbon steel for hardness, durability and smooth surface. The saw blade is made of strong HHS, durable and sharp, very suitable for PVC and plastic pipes, also can be used for soft metal pipes, but when cutting soft metal pipes, please use coolant or water when cutting to prevent the saw blade from overheating..
  • The overall length of plumbing pipe cutteris 10.5 cm(4.13"), and the length of the hexagonal handle is 2.8 cm(1.1"). The pipe cutter is suitable for most electric drills and is very easy to install and replace. Small in size and easy to carry, it is not only suitable for cutting from the outside but also for work scenarios where pipes need to be cut from the inside..
  • Three major precautions: 1. Be sure to wear gloves....
Check Stock

Plumbing Inside Cutter, 1/4\ Hex Shank Pipe PVC Inside Cutter Internal Plastic Pipe Cutter(32mm Saw Blades*3, 44mm Saw Blades*1，Hexagon wrench）

  • ...extension rod (first) - serrated washer - saw blade - flat washer - screw (last). The screws must be tightened and reinforced! Refer to the fourth photo for example~.
  • A set of plumbing PVC pipe internal cutter with 4 saw blades (3 blades with 1.25 inch diameter and 1 blade with 1.75 inch diameter), two sets of screw fastening parts and a hexagon wrench. Please protect the saw blade. There is a layer of protective oil on the saw blade. Do not mind. Refer to the fourth picture for parts installation sequence..
  • The plumbing saw handle is made of heavy-duty carbon steel for hardness, durability and smooth surface. The saw blade is made of strong HHS, durable and sharp, very suitable for PVC and plastic pipes, also can be used for soft metal pipes, but when cutting soft metal pipes, please use coolant or water when cutting to prevent the saw blade from overheating..
  • The overall length of plumbing pipe cutteris 10.5 cm(4.13"), and the length of the hexagonal handle is 2.8 cm(1.1"). The pipe cutter is suitable for most electric drills and is very easy to install and replace. Small in size and easy to carry, it is not only suitable for cutting from the outside but also for work scenarios where pipes need to be cut from the inside..
Check Stock

BEETRO Heavy Duty Hand Riveter, Rivet Gun, 3/32\-1/8\-5/32\-3/16\

  • Four-Sizes Rivet Heads - Our BEETRO hand riveter provides portable fastening, includes 4 replaceable heads 3/32" (2.4mm), 1/8" (3.2mm), 5/32" (4.0mm) and 3/16" (4.8mm), meeting most of your rivet needs..
  • 100 Pcs Rivets - Our BEETRO hand riveter is equipped with 100 rivets of 4 different types to accommodate a variety of riveting jobs: 2.4/3.2/4.0/4.8mm..
  • Wide Application - The hand riveter is perfect for joining all kinds of plastic, metal, leather, pipe jobs and more..
  • Convenience - The head wrench allows for easy changing of rivet nozzles..
  • Easy to Carry - This product is of ergonomic design for maximum fit and comfort. Also, this product is light, making it easy and convenient to carry. It is suitable for metal, plastic, metal, furniture, etc..
Check Stock

Qovydx 40Pcs 5/8" Single Ear Hose Clamps 304 Stainless Steel 17.8mm-21mm PEX Cinch Clamps 5/8 inch Stepless Cinch Crimp Rings Pinch Clamps for Pipe Fitting Connections

  • ...rm seal. No protrusion and gap inside, narrow band design providing a more concentrated sealing pressure. Special cochlear design provides a strong thermal expansion compensation function, which compensates for the dimensional change caused by the change of the hose, so that the pipe is always in a good sealing and fastening state. Easy to install..
  • Size: 40Pcs Crimp hose clamps cover inner diameter range of 17.8mm-21mm..
  • 【VARIOUS USES】Hose clamps used to seal various types of hoses, pincers can increase clamp force, designed for repairing pipes & plumbing systems. Widely used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect for automotive, industrial, boat/marine, shield, household etc. both indoor and outdoor..
  • [QUALITY AFTER-SALE SERVICE] If you have any question, please feel free to contact us with Email, we will give you a satisfactory reply with 24 hours..
Check Stock

Roadformer 5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel (2 Pack)

  • 2 PIECES IN PACK – 5 inch Lap Joint exhaust clamp is made in high quality standard aluminized steel, used for 5 inch OD to ID exhaust system connection.
  • REAL SEALING CAPABILITY – Roadformer 5 inch exhaust band clamp is using 12.9 degree high-strength fastener providing real sealing capability of leakage free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, new engineering design provides fast, easy and accurate installation..
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

SCUSTY Women's Vintage Corduroy High Elastic Waist Wide Leg Pocketed Pants Trouser(Brown-M)

  • Zip and button fastening, side and back pockets. Elastic in the back waist, easy to put on and take off.
  • Material: made of high quality corduroy material, soft, lightweight, breathable, skin-friendly, and comfy to wear.
  • Pockets: two side pockets, two back pockets, you can keep small items and your phone in it. Relaxed loose fit, you can size down for a regular fit.
  • Features: straight wide leg, long legged, baggy look, women straight leg corduroy stem-pipe streetwear, Y2K hipster pants trousers.
  • Khaki/ brown/ black/ armygreen/mocha corduroy pants for women are easy to pair with a tank top, T-shirt, camisole, and blouses. Nice, roomy, and comfy corduroy pants for spring/ summer/ fall/ winter.
Check Stock