ReviewsPipe Fitting Brass

Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs

  • ...de of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅ [FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubin....
Check Stock

Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)

  • ...ade of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.....
Check Stock

BELEY 1/2 Inch & 3/4 Inch Olive Remover Puller Tool Removal Tool Solid Brass Copper Pipes Fitting Compression Fittings Thread Tool Puller Metric Handle Nut

  • US 1/2 Inch & 3/4 Inch Ferrule Removal Tool: The olive puller is suitable for any solid brass pipe fittings with a diameter of 15mm and 22mm. Solid....
  • Main Function: The olive puller uses a compression fitting to lock the nut, and takes out the used or damaged olive from the copper pipe without....
  • High-Quality: The copper pipe fittings are made of solid brass. The high-quality brass makes the product sturdy and durable, with high strength, high....
  • Easy to Use: The olive removal tool can remove most olives and can also increase torque, which is appropriate for various tasks. And the operation is....
  • After Sales Service: We provide 7X24h service. If you have any questions about this brass tube, please feel free to reach us via email..
Check Stock

ECUDIS 10 PCS Lamp Pipe Brass Coupling 0.6 Inch Long 1/8 IP for Lamp Rod and Light Fixture Assemlby or Repair Lamp Tube Threaded Locknuts

  • 0.6 Inch fitting to connect two separate threaded rods or pipes..
  • Fits 1/8 IP standard lamp pipe, hardware DIY repair part..
  • Brass material makes the lamp pipe connection duralble and antirusting.
  • ECUDIS makes and sells easy to use products, if you have any questions please contact us..
Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

  • ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
  • ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
  • ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
  • ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
  • ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

  • BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
  • Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
  • Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
  • Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
  • Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check Stock

SUNGATOR 12-Pack Air Hose Fittings 1/4 NPT to 3/8 Barb Hose Barb Adapter Brass Pipe Fittings Male Threaded End

  • 【PREMIUM MATERIAL】: High quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, 3/8”barb X 1/4”NPT male pipe, 12 pack.
  • 【DURABLE】: The barb fitting is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective connection.
  • 【FUNCTION】: Barb head for connecting hoses, NPT end used to connect NPT pipes, brass is corrosion resistant which can apply to water, gas, oil and fuel as well as air tools.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
Check Stock

SUNGATOR 6-Pack Air Hose Fittings 1/4 NPT to 3/8 Barb Hose Barb Adapter Brass Pipe Fittings Male Threaded End

  • 【PREMIUM MATERIAL】: High quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, 3/8”barb X 1/4”NPT male pipe, 6 pack.
  • 【DURABLE】: The barb fitting is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective connection.
  • 【FUNCTION】: Barb head for connecting hoses, NPT end used to connect NPT pipes, brass is corrosion resistant which can apply to water, gas, oil and fuel as well as air tools.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
Check Stock

3/8 Hose Barb to 1/2 Male NPT 90 Degree Elbow Brass Hose ID to Pipe Threaded L Right Angle Fitting Fuel/Air/Water/Gas/Oil WOG 2 Pack

  • ✅ CONTENTS: Two 3/8-inch barb to 1/2-inch NPT male 90-degree brass elbows, use it to change the flow direction from vertical pipe to horizontal hose or the opposite way.
  • ✅ APPLICATIONS: Suitable for use in home, automotive, nautical, industrial, and commercial applications. Brass elbows are perfect to made air, water, fuel, coolant, gas and oil connections. NOT RECOMMENDED FOR POTABLE WATER USE. Please Note: NPT Size DOES NOT directly correspond to actual dimensions of the thread. 1/2 NPT nominal size works with a 0.84" outside diameter pipe.
  • ✅ HIGH-QUALITY HEAVY-DUTY BRASS: Made completely of solid, durable CA377 forged, machined brass that is barbed from a solid brass stock using the CNC machine center. High quality deep threads will prevent leaks and corrosion. These pieces are ultrasonically cleaned before leaving the factory, so their surfaces do not have any metal shavings and dust, and no organic oil adheres to the surface. This pipe fitting provides full and secure flow and withstands high pressure..
  • ✅ 100% MONEYBACK GUARANTEE: We offer 100% money back guarantee with no questions asked. This great product also comes with 10-year warranty for quality related issues. Purchase with confidence and enjoy our risk-free offer.
Check Stock

WADEO Rain Barrel Spigot, Brass Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting-Black

  • Two installation methods: Brass bulkhead fittings front mounting and back mounting. Designed for irrigation with Rain Barrel, Not for Portable Water, Not Lead Free Compliant..
  • Heavy Duty 3.2 oz Solid Brass Bulkhead Fitting, 1/2" Female to 3/4" Male water tank connector bulkhead tank fitting. Heavy duty 3/4"water outlet no kink quarter turn solid brass ball valve can conntect with garden hose.
  • Bulkhead fittings need 1 inch diameter holes to install. Fit up to 0.78 inch thickness wall..
  • Tools Needed for Installation: Electric drill, 1 inch hole saw, and pipe wrench or adjustable wrench..
  • Two washers (6.8mm between inner ring and outer ring), which can help you install the rain barrel spigot conveniently and effectively prevent leakage..
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock