ReviewsPipe Fitting Crosses Over

FORMUFIT Furniture Grade PVC Pipe, 40", 1/2" Size, Black (3-Pack)

FURNITURE GRADE PVC PIPE – Made from ultra-strong, UV-resistant premium furniture grade PVC material. This is an engineered plastic that is designed for outdoor use, weatherability, and can be used in direct sunlight without becoming brittle or shattering..
SOLID, BEAUTIFUL PIPE – Monolithic, solid-wall pipe has the same color inside and out. Unmarked, glossy surface finish gives a clean, professional appearance that makes projects look incredibly professional and properly finished..
UV RESISTANT – Infused with UV inhibitors to allow the pipe to be used in the sun. Will not crack, change color or degrade over time like plumbing-grade PVC pipe..
CONNECT EASILY: Join by solvent welding (standard clear PVC cement) or by press-to-fit. Can also be used with screws between where the pipe and fitting meet to make removable and reusable connections..
PRODUCT SPECIFICATIONS: Fits 1/2” Size PVC fittings. Pipe has an actual outside diameter of 0. 840 in. (13/16 in. ). Average Inside Diameter: 0. 622 in. . Minimum wall thickness: 0. 109 in..

Check Stock

Class A Customs | T-1300-SP | One (1) Spouted 13 Gallon RV Fresh and Gray Water Holding Tank RV Concession

...PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
TANK BUILT-IN FITTINGS: (ONE) 1.25" Outer Diameter x 2" Long Boss Fitting (Smooth Pipe / Spout) fitting is open and glue does not stick to pipe, hose with clamp needed (THREE) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..

Check Stock

4PCS 1-1/2Inch Elbow PVC Fittings, 5-Way Heavy Duty PVC Pipe Fitting, Furniture Grade PVC Fitting Connector Corner Fitting for Water Supplies Build PVC Furniture DIY Garden Shelf Greenhouse

HIGH GRADE PVC PIPE FITTING: The PVC elbow fitting are constructed with high quality PVC furniture grade material, the surface is treated with anti-corrosion and anti aging process with strong sealing and good quality features for long service life..
1-1/2INCH 5-WAY CROSS PVC ELBOW FITTING: 5-Way PVC fittings fit three segments of PVC pipe together. PVC pipe slides into each socket for a secure, square corner fit. Fasten in place using PVC solvent cement or with screws between the PVC pipe and fitting for a permanent joint..
PVC FURNITURE FITTING: 5-way cross side outlet elbows PVC furniture fitting are a popular part of non-plumbing applications.
Furniture grade PVC parts were crated when people realizing PVC is a great material for building things outside of the plumbing world. They are usually bright white and made to look great while still being strong and durable..
GLOSSY FINISHED WITH SLEEK LOOK: Furniture grade fitting connector means the surface without barcode or printing , glossy finished bring a sleek look.
PVC fitting has 5 socket ends that plus it fits standard SCH40/80 PVC pipe, great for PVC projects and crafts..
WIDE APPLICATION: 5-way cross PVC connector furniture grade fittings are available for build PVC furniture, water supply enginee....

Check Stock

14PCS 5-Way PVC Fittings, 3/4Inch Elbow PVC Fitting SCH40 PVC Pipe Fitting Heavy Duty PVC Furniture Grade Fitting Connectors for Water Supplies Build PVC Furniture DIY Garden Shelf Greenhouse

HIGH GRADE PVC PIPE FITTING: The PVC elbow fitting are constructed with high quality PVC furniture grade material, the surface is treated with anti-corrosion and anti aging process with strong sealing and good quality features for long service life..
3/4INCH 5-WAY PVC ELBOW FITTING: 5-Way PVC fittings fit three segments of PVC pipe together. PVC pipe slides into each socket for a secure, square corner fit. Fasten in place using PVC solvent cement or with screws between the PVC pipe and fitting for a permanent joint..
PVC FURNITURE FITTING: 5-way side outlet elbows PVC furniture fitting are a popular part of non-plumbing applications.
Furniture grade PVC parts were crated when people realizing PVC is a great material for building things outside of the plumbing world. They are usually bright white and made to look great while still being strong and durable..
GLOSSY FINISHED WITH SLEEK LOOK: Furniture grade fitting connector means the surface without barcode or printing , glossy finished bring a sleek look.
PVC fitting has 5 socket ends that plus it fits standard SCH40/80 PVC pipe, great for PVC projects and crafts..
WIDE APPLICATION: 5-way PVC connector Furniture grade fittings are available for build PVC furniture, water supply engineering, installation o....

Check Stock

Smart Vac SMP500 Central Vacuum System Power Unit

Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').

Check Stock

Central Vacuum Cleaner with Deluxe Accessory KIT-Set

Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').

Check Stock

RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper

42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....

Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....

Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
【Operating temperature range】Temperature rating: -65 to 250 degrees F.
【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..

Check Stock

boost/vacuum gauge silicone coupler adapter - Car Turbocharger Pipe Fitting Universal Turbocharger Silicone Boost Pipe Hose Nipple Turbo Vacuum VAC Gauge Fitting TDI

Wide Application---The turbocharger pipe fitting is suitable for a 4mm inner diameter pipe. 100% brand new aftermarket Boost Pipe Fitting that has never been used.
For Boost Gauge---This boost hose nipple fitting allows you to fit a boost gauge or any other type of instrument where vacuum or boost pressure is required.
Superior Quality Aluminum Alloy---The turbo boost pipe hose nipple is made of high quality aluminum alloy and durable to use. The manufacture of the fitting meets the strict quality requirements.
Easy Installation---The turbocharger mounting kit is easy to install, simply drill a 8mm hole in your silicone boost pipe and push the nipple through the hole (from the inside), put on the sealing o-ring, washer and tighten down with the nut.
Quality Assurance---As a professional seller, we provide high quality products and considerate services. Every product must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.

Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
Thick formula fills gaps in large diameter pipe and loose fitting joints.
Recommended for potable water, pressure pipe, conduit and DWV.
Recommended application temperature 40°F to 110°F / 4°C to 43°C.

Check Stock