ReviewsPipe Fitting Reducing Socket

6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine

• Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
• 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
• High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
• Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
• IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
• It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
• 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....

VKALTUL Pipe Olive Remover Puller Tool Easy Removal Without Damage, Olive Puller Ferrule Puller, Compression Sleeve Puller Suitable for Brass Olive Pipes with Diameters of 1/2in & 3/4in

• 【No Damage】VKALTUL pipe olive remover puller tool is used to remove used or damaged olives from the air-conditioning pipes without damaging the pipe by uillizing compression fittings to lock nut. It can increase torque and remove olives more easily..
• 【Two in One】The olive puller is combined with one double hex and one single hex wheel socket. The double hexagonal one is suitable for 1 / 2 inch diameter brass pipe, and the single hexagonal one is suitable for 3 / 4 inch diameter copper pipe. Two in one design is easy to carry and store, and does not occupy space..
• 【Premium Material】This compression ring removal tool is made of solid brass with high strength, high hardness, corrosion resistance, wear resistance, high finish, which have long service life..
• 【Easy to Use】Ferrule blaster ferrule puller is easy to operate, and you can work without reading the manual or using other tools, reducing the working time and improving the working efficiency..
• 【Save Effort】The zinc-plated Tommy bar at the head of ferrule puller is designed by the lever principle, and can move left and right according to the demand to achieve the effect of labor saving..

Ultimate Washer UW16-PWD3C8 Female Quick Coupler by Male Threads, 1/4-Inch, 4000 PSI Rated

• Brass 1/4-Inch Female Coupler Fitting x 1/4-Inch Male Pipe Thread.
• Used Anywhere High Pressure Connections are Frequently Assembled and Disassembled.
• Solid Grip on the Socket Sleeve Allows for Easy Use.
• The Ball Lock Design Insures a Tight Seal Connection Every Time.

24 Pack 4 Way 1/2 Inch PVC Fittings, Dveda PVC Elbow Fittings PVC Pipe Connectors for Furniture Build, Greenhouse Shed Pipe and Tent Connection

• 1.High-Quality Material: The plastic fitting rack made of high-grade PVC material has a more precise manufacturing process than ordinary drainage pipe fittings. Not only can it withstand the impact or fall of a heavy object, but it will not show any cracks or breaks..
• 2.Size and Design: This beautiful and practical 4 Way PVC Fitting is suitable for 1/2 inch pipes. The precise size can be connected to other objects such as water pipes. The white surface and tapered socket structure design can reduce friction and Can let water circulate smoothly..
• 3.Features: PVC fittings are resistant to acid and alkali, low temperature, ultraviolet rays and impact resistance. The inside and surface of the pipe wall are smooth, and the installation is convenient without scratching your hands. The materials used are environmentally friendly and have a long service life..
• 4.Application: Furniture parts are suitable for tent connections, chairs, desks, storage racks, greenhouse, DIY PVC structures & projects etc. It is ideal for edge, corner and center connection. It is perfect to use these PVC accessories to build the required DIY projects..
• 5.Satisfaction After-sale Service: If you are not satisfied with your purchase for any reason, please feel free to reach our friendly ....

Smart Vac SMP500 Central Vacuum System Power Unit

• Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
• 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
• 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
• 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').

Central Vacuum Cleaner with Deluxe Accessory KIT-Set

• Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
• 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
• 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
• 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

• SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
• remove using a disconnect clip or disconnect tongs.
• VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
• large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
• EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
• can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
• PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
• SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.

USA SEALING ZUSA-TF-QD-A-11 Acetal Quick Disconnect Tube Fittings Straight: 1/8\ Socket, 1/8\ Male NPT

Atima Generator Accessories – Extended Run Dual Fuel System Extender Kit for Honda Generator

• ...l tank caps. The tight fitting of the fuel pipe prevents oil leakage..
• [Advantage]:1: Run honda generator fuel extender System Each fuel pipe interface is a quick interface, so it is very convenient to connect .2: When using our products, the generator ,fuel tank and leather pipe are directly connected, not twisted, reducing the distortion of the leather tube and increasing the service life..
• [Thread fit] :The fuel tank cap thread is tightly coupled with the generator thread, and the rubber gasket is squeezed with the generator port to form a seal to prevent air from entering..
• [Tips]：The users should buy another tank with Thread outlet to connect this system , like attwood 8806LPG2S Epa Certified Portable Fuel Tank.The model number of the generator must match the model of the fuel cap.In use, as for the users except Honda generator users, the tank should be placed at a higher position than the generator, using gravity to transport oil.Carefully rotate the fuel tank cap on the generator to prevent damage to the plastic thread on the fuel tank..

GIANNEER Disconnect Tongs Tool Push to Connect Fittings Removal Tools Disconnect Clamp Plumbing Tool for 1/2”, 3/4”, 1” Brass Pipe Fittings

• 1.Versatile Tool: This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth(1/2”, 3/4”, 1”). It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused..
• 2.Unique Design: The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work..
• 3.Interchangeable Teeth: Press the button at the top of the removal tool, then insert the replacement piece to complete the switch..
• 4.How to Use: To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless..
• 5.Superior Material: This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. It’s suitable for various operating environment....

SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF

• SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
• remove using a disconnect clip or disconnect tongs.
• VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
• large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
• EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
• PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
• suitable for underground and behind-the-wall applications with no access panels.
• SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.