ReviewsPipe Fitting Sealant

Alenor Butyl Rubber Tape 1/8'' x 3/4\ x 33 Feet - Repair Rv and Auto, Seal Seams, Cracks, and Holes with The Professional Finish, roof leaks, Plumbing Pipes, Vents, Boats, car Window leaks

✅ KEEP YOUR RV OR AUTO LEAK-FREE : It doesn't dry out like other sealants, so it has a 10-year shelf life. What really sets it apart, though, is its ability to seal seams, cracks, and holes. if you have a leaky boat, car window, or glass, this product is for you. It's also great for EDPM rubber roof patching and used to seal: Windowsills, Vents, Flanges, Laps, and Cracks on RVs, Trailers, Etc....
✅ SEALING PLUMBING JOINTS : Sealing plumbing joints with butyl tape is an easy and efficient way to prevent leaks and save you time and money.
The butyl tape seals any possible leak points and helps the pipe stay in place.
You can use this tape on galvanized pipe, copper pipe, PVC pipe, and ABS pipe..
✅ BLOCK ROOF LEAKS : It is a rubber-based material and has excellent waterproofing and insulation properties.
The product is used for sealing roof leaks, windows, and doors from the elements, and has many benefits.
Like another watertight and airtight seal, butyl putty tape prevents any moisture or air from getting in or out of the product..
✅ WATERPROOF : Butyl seal tape is a type of flexible sealant which is very resistant to extreme heat, corrosion, and water.
It will not shrink in the presence of these factors, and it will resist peeling or cracking.

Check Stock

AirMan ResQ Tire Repair Kit

High performance 12v compressor with cigarette lighter fitting.
Only aftermarket tire repair kit recommended and used by leading car manufacturers including: General Motors, Audi, Mercedes, Ford, Nissan, Porsche,....
Recommended for Cars, Compact SUV's and Minivans.
450ml long lasting eco sealant, easily washes out with water to re-use tire.
Kit includes storage bag, inflator, 450ml sealant, and adapters for different inflation applications.

Check Stock

30 Rolls Thread Seal Tapes, Teflon Tape 1/2 PTFE Pipe Sealant Tape Industrial Thread Sealants Plumbers Thread Tape for Leak Water, Plumbers, Plumbing, Air Head, Thread Pipe, 1/2\ x394\ White

HIGH QUALITY:Thread seal tapes are made of PTFE which has a good sealing capability and can resistant corrosion. Plumbing pipe tape also has a good performance towards moisture and acids, they will not crack easily..
PACKAGE CONTENT:Each package include 30 rolls of thread seal tapes, size :1/2" in width, 393" long(10m ) each roll, 984ft in total. Enough for you to use a long time. You needn't have to buy again and again..
GOOD PACKAGE:Each roll of teflon tape has a plastic cover which can protect the tape from dust, when you finished your work, just place them back to the plastic cover, it is a better way to collect them compared to normal thread tape without plastic cover..
EASY TO USE:When you want to use them, just take out the tape from the plastic package, and wrap it around the tape or air head or some other thing that need this sealant tape, and then screw it in. As it is not sticky, so it is also easy fro you to remove them..
WIDE APPLICATION:Plumbers thread tape can be widely used not only in our home but also in industrial and commercial. They are suitable for leak water, plumbers, air head, air fitting, air compressor, thread pipe and other kind of things..

Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....

Check Stock

FORMUFIT 3/4\ PVC Fittings, 3-Way Corner Connector, Furniture Grade, Orange (8-Pack) - for Greenhouse, PVC Pipe Furniture, Maker Projects | Fits 3/4 inch PVC Pipe - F0343WE-OR-8

EASY TO USE: The FORMUFIT PVC 3-Way Corner Fitting is the fastest and most effortless way to build structural PVC projects with 3/4" PVC pipe. With these PVC fittings (3/4 inch), you can make cubes, PVC pipe furniture, boxes, or right-angle configurations which require a corner or three-point connection. This PVC 3-Way Connector has three (3) extra-deep sockets on separate planes at 90 degrees to each other..
GENUINE FURNITURE GRADE PVC: FORMUFIT 3-Way PVC Corner fittings are 3/4" PVC fittings that are injection-molded using ultra-strong, premium furniture grade PVC resin.
a superior engineered plastic designed for outdoor use, weatherability, and can be used in direct sunlight. UV resistance maintains fitting durability and appearance through years of exposure to varying weather conditions. In addition, this 3/4" PVC elbow has an impact strength that is five times as strong as other PVC pipe connectors due to the formulated impact modifiers..
SAFE AND NON-TOXIC: FORMUFIT 3Way PVC Fitting products are approved for fluid handling in hydroponics, aquaponics, residential irrigation, and aquarium use. These 3/4" PVC pipe fittings do not contain heavy metals, off-gassing phthalates, dioxins, or calcium cobalt filler as seen in imported, imitation/look-a-lik....

Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
【Operating temperature range】Temperature rating: -65 to 250 degrees F.
【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..

Check Stock

D.N. High Grade White Plumbers Teflon Tape, Plumbing Stop Leaks, Water Sealant Tape Perfect for Shower Heads, Pipe Thread Sealing and Toilet Connectors (1/2 Inch x 480')

Size and Quality: D.N. 1/2 inch white plumbers Teflon tape Thickness is : 0.004” (0.075mm), Density:1.3g/cm3, Temperature Resistance: -190°C to 370°C, Water pressure resistance:16MPa, Tensile strength: ≥8MPa, Elongation: ≥25%..
Material: Our plumber’s tape is made of PTFE material, which has high sealing and durability and gets PolyTetraFluoroEthylene Certifications: CSA 20755, UL MH25811 approved.
Water pressure resistance: Each roll of Sealant Tape has a width of 1/2 inch and a length of 480 inches which its Water pressure resistance is 16MPa, Tensile strength: ≥8MPa, Elongation: ≥25%. Our water seal tape Model is Thicker and High density..
plumbing tape has a sealing function to prevent the leakage and stop leaks, water Sealant Tape Perfect for shower heads ,Pipe Sealing, ,and Pipe Threads.

Check Stock

USA SEALING ZUSA-TF-PTC-526 Nylon Push to Connect Tube Fittings Female Branch Tee Black 1/4 PTC x 1/4 NPT Female

Pipe Thread Material: Nickel-Plated Brass.

Check Stock

boost/vacuum gauge silicone coupler adapter - Car Turbocharger Pipe Fitting Universal Turbocharger Silicone Boost Pipe Hose Nipple Turbo Vacuum VAC Gauge Fitting TDI

Wide Application---The turbocharger pipe fitting is suitable for a 4mm inner diameter pipe. 100% brand new aftermarket Boost Pipe Fitting that has never been used.
For Boost Gauge---This boost hose nipple fitting allows you to fit a boost gauge or any other type of instrument where vacuum or boost pressure is required.
Superior Quality Aluminum Alloy---The turbo boost pipe hose nipple is made of high quality aluminum alloy and durable to use. The manufacture of the fitting meets the strict quality requirements.
Easy Installation---The turbocharger mounting kit is easy to install, simply drill a 8mm hole in your silicone boost pipe and push the nipple through the hole (from the inside), put on the sealing o-ring, washer and tighten down with the nut.
Quality Assurance---As a professional seller, we provide high quality products and considerate services. Every product must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.

Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
Thick formula fills gaps in large diameter pipe and loose fitting joints.
Recommended for potable water, pressure pipe, conduit and DWV.
Recommended application temperature 40°F to 110°F / 4°C to 43°C.

Check Stock

Certified Appliance Accessories CERT77300 Universal Gas Line Connector Kit, 4 Feet, gray

4ft heavy-duty stainless steel connector with 5/8” MIP (Male Iron Pipe) x 5/8” MIP on each end.
Two 5/8" OD (Outer Diameter) flare x 1/2" MIP tapped with 3/8" FIP (Female Iron Pipe) adapters.
5/8" OD flare x 3/4" MIP tapped with 1/2" FIP adapter.
Supplies up to 106,000 BTU (British Thermal Unit)/hour.
Includes one 4-Feet heavy-duty stainless steel connector, one 5/8-Inch od flare x 1/2-Inch m.i.p. (tapped with 3/8-Inch f.i.p.) adapter.

Check Stock