ReviewsPipe Location Sensor

Liantinxu 234-4797 O2 Oxygen Sensor Downstream Replacement for Accord 2.4L 2003 2004 2005 2006 2007

Note:Please check your vehicle compatibility,the reference number, size and position are correct.especially the plug interface part..
Fit Vehicles:Replacement for Accord 2.4L 2003 2004 2005 2006 2007..
Advantage: Liantinxu Oxygen Sensor features stainless steel housing,double protection layer, aluminum oxide trap layer, ptfe filter and precoated....
Installation: Direct replacement with OE parts, easy replacement, fast..
Location: Bank 1 Sensor 1=Upstream Right/Rear.

Check Stock

MOTOCOCHE 6 Channel Automotive Engine Noises Stethoscope Kit, Electronics Abnormal Noise Finder Identify Diagnostics Tools with Headphone

[Ensure Safety For Family] - The 6 channel electronic stethoscope is a safety test device used to find out the abnormal noise source and its location, which allows you to repair faults in time, gives your family the most safety. Suitable for automobiles, trucks, heavy machinery, agricultural machinery, etc..
[Easily Find Abnormal Noise] - The abnormal sound indicator is divided into three colors: green, yellow and red. The color change is determined by the detected volume level, the minimum volume is green and the maximum volume is red. Once noise detected, can adjust the sound sensitivity or light sensitivity to confirm the noise location and accurately find the fault in advance..
[6 Sensors Work At The Same Time] - The stethoscope has 6 earphone channels which means the 6 clip-on sensors can be connected to different positions at the same time, and the earphone channel can be switched at will to detect and receive abnormal noise. Simple and comfortable adjustable volume headphone will help you listen more clearly..
[Sensitivity Adjustment] - Turn the sound sensitivity knob clockwise to adjust the range of the sensor's income tones. Turn the indicator light sensitivity knob clockwise or counterclockwise to increase or reduce the light sensitivity, the ....

Check Stock

MOSTPLUS 4 inch Inlet Exhaust Tip 4 Inlet 8 Outlet 15 Length Truck Diesel Exhaust Tip Black Stainless Steel Tailpipe Tip

★FITMENT: Inside diameter inlet---4 Inch, Outside diameter outlet---8 Inch, Overall length---15 Inch.
★MATERIAL: High qualified stainless steel material,durable and anti-corrosive. It will protect your original pipe from the sun and rain, avoid....
★NOTE : It will fit 4inch outside diameter pipe, but will not fit 4 inch inside diameter pipe..
★INSTALLATION - No weld and drill needed.Just fix the screw to the appropriate location of tailpipe by wrench..
★Please check your car information before purchase..

Check Stock

Ambient Weather WH31L Lightning Detector for Models WS-2000 WS-5000

Detects lightning within a 25 mile range(40 km) of your location.
RF 915 MHz sensor range up to 330 feet (100 feet in most conditions) with 79 second refresh rate.
Sensor powered by 2 x AA batteries (included).

Check Stock

GlowShift 2-1/4'-2-1/2' Clamp-On Wideband Air/Fuel Ratio Gauge Oxygen Sensor Bung Adapter - No Weld Design

GlowShift Clamp-On Wideband Air/Fuel Oxygen Sensor Bung Bracket Adapter Allows Users to Easily Install a Sensor to the Exhaust Pipe with a No Weld Design - DIY Friendly.
Adjustable Bracket from 2-1/4" to 2-1/2" - Installs to Vehicle's Exhaust Pipe.
304 Stainless Steel Bracket with (2) Bolts, (2) Nuts, (2) Crush Washers, (2) Flanges, (1) Removable Spacer & Exhaust Gasket to Prevent Leaks.
Includes Step-By-Step Installation Instructions.
GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

Check Stock

AcuRite Iris 06052M Remote Battery Pack for 5-in-1 Weather Sensors

Battery pack compatible with AcuRite 5-in-1 sensor [NOT AcuRite Atlas].
Extra-long 30-foot cable lets you keep the batteries in a remote, weather-resistant compartment that you can mount in a ground-level location.
No sensor data is lost during battery changes! Dual-compartment design allows for replacement of batteries without loss of power to the sensor.
Integrated hang-hole for easy wall-mounting.
Setup is easy: Battery Pack inserts into the battery compartment on any AcuRite 5-in-1 Weather Sensor.

Check Stock

Wall Pipe Blockage Detector 30Meters Pipeline Blocking Clogging Scanner Plumbers Instrument Diagnostic Tool for Steel Iron and PVC Pipes (UT661B)

【Premium Material】Made of high quality and durable ABS material, it has impact resistance and scratch resistance and has a long service life. Equipped with 4 spare probes, which can be replaced at any time, which can extend the service life of the product and improve work efficiency..
【Strong Signal Penetration】 The pipe plugging tester can pass through a wall with a thickness of 50 cm, reducing the removal area. It can accurately locate invisible blockages, detect the inside of blocked pipes, accurately locate..
【Waterproof Design】 Pipe plugging detector adopts IP67 waterproof probe, which can be used to detect various environments..
【Working Methods】 The pipeline blockage detector uses the principle of electromagnetic induction. The pipe blockage emitter probe emits electromagnetic waves, and the pipe blockage receiver receives electromagnetic waves. The blockage location is determined according to the signal strength..
【Wide Range of Applications】 it can be used for wall nails, metal pipes, PVC pipes, and even water pipes. Solve the problem of pipe blockage faced by construction engineers and home users..

Check Stock

RIDGID 19238 NaviTrack Scout Locator, Underground Pipe Locator and Underground Cable Location Device & 16728 Remote Transmitter (512 Hertz Sonde) for Underground Pipe Location,Red/Black,Small

Product 1: Multi-directional antenna technology sees the entire signal all of the time - maximize the signal strength to find the target pipe, sonde, or energized line.
Product 1: Underground pipe locator verifies position using a micro-mapping display to mark distinctive poles in front of and behind the target, ensuring an accurate locate.
Product 1: When using as underground cable locator or pipe locator, the Navitrack Scout automatically calculates and displays depth when oriented over the target..
Product 1: Meets FCC Class B and EN 55022 Class B - operates in these standard frequencies: Sonde - 16 Hz, 512 Hz, 640 Hz, 874 Hz and 33 kHz.
Line Trace - 128 Hz, 1 kHz, 8 kHz and 33 kHz.
Product 2: Attach remote transmitter to drain cleaning cable or a water jet hose to locate pipe underground.
Product 2: Flashing LED to indicate that sonde is transmitting and ready to operate as a beacon during underground pipe location.
Product 2: Meets FCC Class B and EN 55022 Class B requirements.
Product 2: Adapters (catalog # 19263, 19268, 19273, and 19258) attach transmitter to drum machine or sectional cables provide versatility in locating underground pipe and line detection.

Check Stock

DIGITEN G1/2\ Water Flow Hall Sensor Switch Flow Meter Flowmeter Counter 1-30L/min

The Water Flow Sensor is light, nimble outline, small size and easy to install. The bearings used in the rotating part..
There is an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry..
Output Waveform: Square Wave,output pulse signal..
Waterproof, heat resistance, pressure resistance, cold resistance..

Check Stock

Smart Caregiver Wireless Alarm with Bed Sensor Pad and Chair Sensor Pad- No Alarm in Resident’s Room!

Complete system includes 1 wireless bed alarm, 1 cordless bed sensor pad, and 1 cordless chair sensor pad. All items have a 1 year manufacturer....
Place the cordless bed sensor pad 30" across the width of the bed, under the fitted sheet, positioning the pad under the resident's shoulder blades....
Place the cordless chair sensor pad on the seat of a firm chair. Alarm will sound when the resident is arising. Alarm will sound continuously when....
The wireless alarm can be placed in a convenient location with the caregiver, up to 100 feet away from the cordless sensor pads. Alarm features....

Check Stock

RIDGID 21893 SeekTech SR-20 Locator, Line Tracer and Underground Utility Locator, Yellow, Small

Passive Radio Trace:4 kHz-15 kHz, 15 kHz-36 kHz.
Large LCD screen graphically displays representation displaying proximity signal, signal strength, target line and guidance arrows to quickly identify distortion and help map difficult locates.
Omni-Seek technology increases accuracy and efficiency when searching in passive mode- continuously searches passive power and radio bands to locate and avoid unknown metallic lines.
Trace any pipe locator frequency from 10 Hz to 35,000 kHz* while utilizing plumbing camera snakes, sonde (beacons), and wire transmitters for better underground utility location and pipe line tracing.
3 antennas offset 120 degrees from each other in each housing and 2 gradient antennas (8 total antennas) make it easier to pick up the signal regardless of orientation and angle.
Continual Depth feature increases productivity by showing depth changes of signal from underground pipe in real-time.

Check Stock