ReviewsPipe Location Tool

GIANNEER Disconnect Tongs Tool Push to Connect Fittings Removal Tools Disconnect Clamp Plumbing Tool for 1/2”, 3/4”, 1” Brass Pipe Fittings

1.Versatile Tool: This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth(1/2”, 3/4”, 1”). It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused..
2.Unique Design: The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work..
3.Interchangeable Teeth: Press the button at the top of the removal tool, then insert the replacement piece to complete the switch..
4.How to Use: To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless..
5.Superior Material: This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. It’s suitable for various operating environment....

Check Stock

Pipe Reamer Tool [Plumbers Efficient Helper] Deburring Tool 1/4 to 5/8 Inner/Outer for Copper PVC Pipe Cleaner Stainless Steel Tubing and Pipe Reamer

【Efficient Deburring】Plumber is here! This pipe reamer tool makes smooth work of cleaning up the ends of copper and plastic pipe for better....
【Excellent Grip】This pipe deburring tool has a metal casing that does not deform easily during operation like plastic, which enhances safety, and....
【Deburring Tool for Copper Pipe】There are 4 solid stainless steel reamers inner and outter, enough to deal with PVC pipes and copper pipes, and....
【Small Diameter Friendly】This pvc pipe reamer tool adapts to pipes in the OD and ID range of 1/4" to 5/8", so you can apply it to narrow pipes..
【Portable Debur Tool】2" diameter & 2.36" height, it won't take up too much space in the toolbox, easy to carry. With a good painting process, the....

Check Stock

FLKQC Wood Gluing Pipe Clamp Set, Heavy Duty Cast Iron Quick Release Pipe Clamps for Woodworking (6, 3/4")

Use with a 3/4” pipe to make a clamp fixture of any length desired..
Spring lever control locks jaw at any needed location and provides quick release..
Heavy duty lead screw pipe clamp for woodworking..
Cast iron construction 3/4” pipe clamps..
Package includes 6 PIECES of 3/4" wood gluing pipe clamp..

Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Flaring Tool Set Brake Repair Brake Flaring Tools for 1/4 -3/8 Brake Flare Tool with Tube Cutter and Deburrer Tube Flaring Tools for Copper Lines

Tube Expanding Functions: This hydraulic flaring tool is equipped with φ 1/4", 5/16", 3/8" expanding dies and adapters, including 45° flaring cone,....
Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with....
Pipe Cutting & Deburring: The flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging....
Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a....
Wide Application: This hydraulic flaring tool kit is suitable for expanding copper and stainless steel piping. It is an excellent tool for repairs on....

Check Stock

ANCEL S1000 Automotive Evap Smoke Machine and ANCEL BST500 12V 24V Automotive Battery Load Tester with Printer

...lligently activated to turn it off. The device can also work normally at -20℃..
[2 working modes] Air mode and smoke mode, the air mode can help you test whether there is a leak in the pipe by injecting air into the pipe, and judge by the sound made when the air leaks. The smoke mode is to accurately determine the location of the leak through the visible smoke after detecting the leakage of the car, so as to solve the problem of car failure. Do not need to buy additional air machine or air pump, affordable ancel S1000 is the best choice for saving money..
【Great Compatibility】BST500 battery tester is designed for 12V and 24V lead-acid batteries with a capacity of 100 to 2000 CCA, including regular flooded, AGM flat plate, AGM spiral, gel, and deep cycle batteries. It covers most battery rating standards such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB..

Check Stock

Durable Universal Hydraulic Pipe Expander Fuel Line Flaring Tool Set Dilator Scraper Cutter Hole Splint

Expanding & Flaring Functions: This hydraulic flare tool features 2-in-1 tube expanding and flaring functions with eight expanding dies(3/16", 1/4",....
Manual Hydraulic Mechanism: This flaring tool set achieves the pipe expanding and flaring with a hydraulic mechanism. The hydraulic tool is designed....
Pipe Cutting & Deburring: This flaring tool comes with one pipe cutter and one deburring tool, both of which are easy to use with the handwheel....
Durability & Portability: The flaring tool is made of durable hardened steel, which is reliable and built to last, saving your money. Besides, the....
Wide Application: This hydraulic flaring tool kit is suitable for expanding and flaring soft metal tubing and piping, such as copper and aluminum....

Check Stock

PVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle

【Effectively Cut Tailpipes】 Work on tailpipes and exhaust pipes with diameters ranging up to 3.15"/83 mm. Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
Cut tailpipe and exhausts on or off the vehicle with ease for making repairs or installing catalytic converters.
【Cut Pipes Easily】 Cut pipe with our pipe cutter tool in four easy steps.
Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
Cushioned for comfort and non-slip security.
【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from duri....

Check Stock

Libraton Pex Cutter 1-1/4\

【Premium Quality】Libraton PVC pipe cutter is made of durable hardness aluminum alloy steel. The thick blade used is of SK4 material with precision sharped..
【Widely Application】The pex pipe cutter (cutting range: up to 1-1/4-inch or up to 31mm) is designed up to cut pipes of various plastic materials (PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.). The tube cutter (cutting range: 1/8inch to 7/8inch or 3-22mm) can be used to cut pipes made of aluminum and copper. It is an essential cutting tool set for your home handyman, plumbers, electricians, and vehicle mechanics..
【Working with Safety】There is a safe lock in the bottom of pex cutting tool. You can buckle it when you don't use the cutter..
【Reasonable Cutting Tool Composition】The PVC pipe cutting tool set includes three compositions, PVC pipe cutter x1, mini tube cutter x1 and PTFE seal tape x3, which can meet your various need when doing the pipe or tube cutting work..
【Attension】This PEX cutter is suitable for most PEX pipes and thin PVC pipes. IT IS NOT SUITABLE FOR THICK PVC PIPES AND PVC PIPES WITH METAL LAYERS. Also, we offer a 12-month lifetime warranty. We have an after-sale service team here for you to ensure your 100% satisfaction..

Check Stock

OEMTOOLS 27045 Tailpipe Cutter, Features Pipe Cutter Chain w/ Cutting Wheels, Exhaust Pipe Cutter w/ Cushion Grips, Can Be Used as PVC Cutter or Copper Pipe Cutter

CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
Keep well oiled, not for use on stainless steel.
EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
Work in cramped spaces with one-handed rotation.
The cushion grip handles ease pressure on your hand while you increase your grip.
BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
The head of the exhaust cutting tool won’t bend from during rotation.
Lightly lubricate cutting wheels before use.

Check Stock

AMZCNC Compact Bender Kit with Reverse Bending Attachment for 1/4 - 7/8 Tube and Pipe Bending Premium Ratcheting Tube Bender

【High quality material】: The main body of the tube bender of The copper tube bending tool kit is made of stainless steel, which is pressure....
【Wide range of application】: This pipe bender tool kit is suitable for pipe benders of 1/4"-7/8", applicable pipe materials: copper pipe, aluminum....
【Easy to install】: The pipe bender is easy to install, easy to assemble and operate, and easy to get started. Support pipe diameter: 1/4.
【Ergonomic design】: CT-999 pipe bender conforms to ergonomic design. The kit is made of 304 stainless steel, steel fiber, iron and other....
【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe....

Check Stock

Excalibur 9-Tray Food Dehydrator and 4 ParaFlexx Dehydrator Sheets

Attach remote transmitter to drain cleaning cable or a water jet hose to locate pipe underground.
Flashing LED to indicate that sonde is transmitting and ready to operate as a beacon during underground pipe location.
Meets FCC Class B and EN 55022 Class B requirements.
Adapters (catalog # 19263, 19268, 19273, and 19258) attach transmitter to drum machine or sectional cables provide versatility in locating underground pipe and line detection.
Constructed with a solid steel core, abrasion-resistant urethane coating, and stainless steel wear ring for durability.

Check Stock