ReviewsPipe Plugs

5 Millimetres Plastic Hole Plugs 3/16 Inches Round Button Plugs Screw Cap Drilling Cover Plugs for Cabinet Cupboard Shelves White,300 Pieces

  • Package includes: 300 pieces plastic hole plugs fitting for 5 mm (3/16-inch) hole, enough for your daily use.
  • Easy to fix: the white cap plugs are designed with ridges on the cap rod for fixture.
  • If the diameter of the rod fits the hole or pipe fitting, the....
  • Easy to install: the white screw hole plugs require simple installation.
  • The plugs are designed with ridges on the cap rod for grip to fix in the hole.
  • Practical tools: the white hole covers are intended to fill in and hide the exposed peg holes in cabinetry with adjustable peg-supported shelving.
  • Wide application: the button plugs are suitable for nail holes, screw holes, partition holes on cabinets, brackets, bookshelves, bookcases, closets,....
Check Stock

RAPIDAIR FASTPIPE F2024 Inlet 1' x Outlet 1/2' NPT, Nylon with Brass Insert

  • 1 inch Fast pipe inserts in the top, and there are (2) 1/2" Female NPT outlet ports, included bottom moisture drain.
  • Included: Wall Block, Drain Valve and (2) 1/2" pipe plugs.
Check Stock

RVMATE RV Water Heater Drain Plug Kit, Include Angled Wrench, 4 Pieces 1/2\ NPT Replacement Plugs and 1 roll PTFE Tape

  • Useful RV water heater tool kit, contains 1 wrench, 4 drain plugs and 1 PTFE tape..
  • Special angled design wrench, helps you reach tight places and rotate drain plugs. Suitable for 15/16 inch and 7/8 inch..
  • 1/2” NPT water heater drain plugs fit for most RV water heater..
  • Wrench prongs for rusted drain valves and petcock drains..
Check Stock

1/2" NPT Solid Brass Drain Plugs commonly Used in Boat Hulls, 2 Pack Solid Brass Boat Hull Spare Garboard Drain Plug for Bayliner Four Winns Glastron Larson Sea Ray Starcraft and Many Other Models

  • Cast Brass Pipe Plug, 1/2" NPT solid brass Drain Plugs. These are made to stopper drain holes on boat transoms. It fits a standard transom drain hole. Check the size of your transom hole..
  • Precision thread and solid brass, more durable, ductility at high temperatures, and low magnetic permeability, not hollow like many poor quality plugs that rot and sink boats..
  • This item for sale is a brand new 2-Pack of 1/2" NPT solid brass Drain Plugs commonly used in boat hulls. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • Used on Most boats such as: Bayliner, Four Winns, Glastron, Larson, Sea Ray, Starcraft And many other models. Unique design achieves very good waterproof sealing performance..
  • It can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Stanley Proto J140SET Proto 4 Piece Internal Pipe Wrench

  • Ideal for removing broken threaded pipe ends, plugs and fittings.
  • Installation and removal without thread damage.
  • Eccentric cam action engages wrench against the walls of the pipe.
  • Hex body allows for use of adjustable wrench for added torque.
  • Made from hardened steel and plated to help prevent rust, Made in USA.
Check Stock

Prescott Plastics 1 1/2” 38.1 mm Square Plastic Plug Insert Black End Cap for Metal Tubing Fences Glide Protection for Chairs and Furnitures 10 Pack

  • HOW TO FIT: 1 1/2” (Outside dimensions) Square Plastic inserts will fit inside hole dimensions of 1 1/4" To 1 7/16” Inside dimensions) with a wall thickness 0.040 to 0.122” (10-20 gauge). NOTE: It will not fit a 1 1/2" opening..
  • FLOORING PROTECTION: Prescott Plastics black ribbed plugs prevent scuffs on wood and other natural floors. They provide a protective “glide” for chair tips, bench feet, table legs, bar stools, patio furniture, and other furniture designed for furniture inserts and plugs..
  • PREMIUM QUALITY PLUGS: Our plugs and inserts are designed to hold up in all harsh weather conditions and high traffic areas..
  • EASY TO INSTALL: Our 1 1/2" snap in plug is a long-lasting solution for many household or outdoor projects including: Fence/Fence Railing Posts, Gate Rail Post Covers, Trailer Frame End Posts, Pole Pipe Rod Caps, Metal Bike Fittings, Wrought Iron Steel Finishing Plugs..
  • MADE IN UK: These Plugs are specially designed and produced in UK to maintain quality, endurance and durability..
Check Stock

1 Pieces Drip Irrigation Tubing Hole Punch Tool for Easier 1/4 Inch Fitting Emitter Insertion and 50 Pieces Drip Irrigation Plugs Goof Plugs for Hose or Tubing End Caps Puncture to Insert Fittings

  • The package includes: 1 drip irrigation pipe punching machine and 50 drip irrigation plugs, a reasonable package for your daily use.
  • Appropriate size: The punch size is 3 mm (0.118 inch), which can fit tightly to eliminate waste and maintain proper pressure in the drip system. Both ends of the irrigation plug are of different sizes. One end is suitable for standard holes of 3 mm-6 mm, or one end of any 1/4 inch feeder is covered, and the other end is suitable for worn transmitters of 7 mm or about 1/4 inch Hole.
  • this multifunctional stopper is suitable for filling into 1/2 inch drip irrigation pipe.
  • Practical and durable: the punching tools are made of quality plastic and metal, practical and durable, not easy to rust and damage.
  • the plastic part of the punch allows you to hold it comfortably, and the punch has been polished, so it will not change It is blunt and can serve you for a long time.
  • the drip irrigation pipe plug is made of quality plastic, which is not easy to break or deform, sturdy and durable, waterproof, and can be applied outdoors in sunlight or rainy weather..
  • Scope of application: Irrigation pipe puncher can be applied to perforate polyethylene pipes for installation of drippers and micro nozzles.
  • suitable for PE pipes with diameters o....
Check Stock

Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings

  • ❀【Package Included】: Cimeton drip irrigation tubing punch and fittings kit includes 2pcs drip irrigation tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
  • and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
  • ❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
  • ❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
  • ❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the....
Check Stock

Prescott Plastics 1.5\ Inch Square Plastic Plug Insert (20 Pack), Black End Cap for Metal Tubing, Fence, Glide Insert for Pipe Post, Chairs and Furnitures

  • HOW TO FIT: 1 1/2" - 1.5" (Outside dimensions) Square Plastic inserts will fit inside hole dimensions of 1 1/4" To 1 7/16” Inside dimensions) with a wall thickness 0.040 to 0.122” (10-20 gauge). NOTE: It will not fit a 1 1/2" opening..
  • EASY TO INSTALL: Our 1-1/2" snap in plug is a long-lasting solution for many household or outdoor projects including: Fence/Fence Railing Posts, Gate Rail Post Covers, Trailer Frame End Posts, Pole Pipe Rod Caps, Metal Bike Fittings, Wrought Iron Steel Finishing Plugs..
  • FLOORING PROTECTION: Prescott Plastics black ribbed small hole plugs prevent scuffs on wood and other natural floors. They provide a protective “glide” for chair tips, bench feet, table legs, bar stools, patio furniture, and other furniture designed for furniture inserts and plugs..
  • PREMIUM QUALITY PLUGS: Our plugs and inserts are designed to hold up in all harsh weather conditions and high traffic areas..
  • MADE IN UK: These Plugs are specially designed and produced in UK to maintain quality, endurance and durability..
Check Stock

Prescott Plastics 1” (25.4 mm) Square Plastic Hole Plugs, Inserts, Black End Caps for Metal Tubing, Fences, Glide Protection from Chair Legs and Furniture (8 Pack)

  • HOW TO FIT: 1/1” (Outside dimensions) Square Plastic inserts will fit inside hole dimensions of 3/4” – 15/16” (Inside dimensions) with a wall thickness of 0.042” to 0.122” (10-20 gauge). NOTE: It will not fit a 1/1” opening..
  • EASY TO INSTALL: Our 1/1" snap in plug is a long-lasting solution for many household or outdoor projects including: Fence/Fence Railing Posts, Gate Rail Post Covers, Trailer Frame End Posts, Pole Pipe Rod Caps, Metal Bike Fittings, Wrought Iron Steel Finishing Plugs..
  • FLOORING PROTECTION: Prescott Plastics black ribbed plugs prevent scuffs on wood and other natural floors. They provide a protective “glide” for chair tips, bench feet, table legs, bar stools, square tube end, patio furniture, and other furniture designed for furniture inserts and plugs..
  • PREMIUM QUALITY PLUGS: Our plugs and inserts are designed to hold up in all harsh weather conditions and high traffic areas..
  • MADE IN UK: These Plugs are specially designed and produced in UK to maintain quality, endurance and durability..
Check Stock

Prescott Plastics 3/4' - 0.75' Square Plastic Hole Plugs, Inserts, Black End Caps for Metal Tubing, Fences, Glide Protection from Chair Legs and Furnitures (10 Pack)

  • HOW TO FIT: 3/4” (Outside dimensions) Square Plastic inserts will fit inside hole dimensions of 1/2” – 11/16” (Inside dimensions) with a wall thickness of 0.042” to 0.125” (10-20 gauge). NOTE: It will not fit a 3/4” opening..
  • EASY TO INSTALL: Our 3/4" snap in plug is a long-lasting solution for many household or outdoor projects including: Fence/Fence Railing Posts, Gate Rail Post Covers, Trailer Frame End Posts, Pole Pipe Rod Caps, Metal Bike Fittings, Wrought Iron Steel Finishing Plugs..
  • FLOORING PROTECTION: Prescott Plastics black ribbed plugs prevent scuffs on wood and other natural floors. They provide a protective “glide” for chair tips, bench feet, square tube ends, table legs, bar stools, patio furniture, and other furniture designed for furniture inserts and plugs..
  • PREMIUM QUALITY PLUGS: Our small hole plugs and inserts are designed to hold up in all harsh weather conditions and high traffic areas..
  • MADE IN UK: These Plugs are specially designed and produced in UK to maintain quality, endurance and durability..
Check Stock