ReviewsPipe Taps Carbon Steel

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

...x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
Each compartment is labeled with sizing for simple identification.
PACKAGE CONTENTS: Combination set contains both metric taps and dies.
Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
(Thread pitch gauge not included, but we recommend using these taps to light up threads from the....

Check Stock

iplusmile Faucet Wrench Carbon Steel Multifunction Wrench Spanner for Tap Beer Tower Coupler Multi-use Faucet Key Tool Kit

Water Pipe Wrench is Used for disassembly and assembly of a variety of bathroom nuts..
Thickened Adjustable Wrench , wrench thickness up to 3.3MM, durable and not deformed..
Ratchet wrench metric Suitable for DIY household taps, tap water hose disassembly or installation replacement work..
Socket Ratchet wrench is cold pressed with high-quality A3 carbon steel cold-rolled sheet, and the board is stronger and more durable..
Multi-functional bathroom Combination Wrenches, multi-standard, multi-purpose, home standing..

Check Stock

Drill America DWTCS12X1.25S Carbon Steel Tap Set, M12 x 1.25

Used to re-thread damaged and/or jammed threads.
Carbon Steel Hand Taps may also be used to thread mild steels.
Carbon steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole..
Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

Check Stock

Drill America DWTP5/8-18 5/8'-18 Carbon Steel Plug Tap (Pack of 1), DWT Series

Used to re-thread damaged and/or jammed threads.
Carbon Steel Hand Taps may also be used to thread mild steels.
Carbon steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole..
Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

Check Stock

1\ NPT Pipe Carbon Hex Rethreading Die

▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
(20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
(12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.

Check Stock

Carbon Fiber Exhaust Tip 3 Inch Inlet 4 Inch Outlet Burnt Blue 3 Inch Exhaust Tips Muffler Tip

【Purchase Guide】 Remove the exhaust tip from the original car and make sure the outer diameter of the exhaust pipe is 3 inch(77mm)..
【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3.0 inch..
【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid rusting and deformation..
【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high temperatures.Also can decorate the car, increase the beauty of the car, enhance the driving experience..
【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..

Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

...ded in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
Instead of other kits which are made of low carbon steel, our kit are made of *** bearing steel*** which are more stronger, good abrasion performance. An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood..
Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.

Check Stock

Carbon Fiber Exhaust Tip 3 Inlet 4 Outlet Red Exhaust Tip 3 inch Car Tailpipe Muffler Tip for 3in Exhaust Pipe

【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3 inch.
【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid....
【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high....
【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
【Warranty】 Tempsnow provide 30-Days warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're....

Check Stock

Craftsman 75 pc Inch & Metric tap and die Set

Combines inch and metric sizes in 1 convenient kit.
Set includes: 7 drive tools with accessories, 17 inch plug taps, 17 inch hex dies, 17 metric plug taps, 17 metric hex dies & sturdy storage case with handle.
Hardened, precision-ground and polished carbon steel surfaces make chip removal easy.
Hex-shaped dies permit use of sockets and wrenches as well as die stocks.
Rust-resistant satin finish for smooth cuts with less friction.

Check Stock

BOSCH BPT12M125 12mm - 1.25 High-Carbon Steel Metric Plug Tap

Metric plug taps – engineered for cutting right-hand internal metric threads, these taps are ideal for cutting internal threads in import cars, motorcycles and machinery.
Heat-treated carbon steel – provides superior durability and speed.
Rolled threads – deliver more accuracy and are cleaner than machined threads.
Package dimensions:0.437"L x 1.5"W x 5.875"H.

Check Stock

60-Pc Master Tap and Die Set - Include SAE Inch Size #4 to 1/2” and Metric Size M3 to M12 Coarse and Fine Threads | Essential Threading Rethreading Tool Kit with Complete Accessories and Storage Case

▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
(20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
(12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.

Check Stock