ReviewsPipe bending Machine

Universal 3 Inch Custom Tubing Mandrel Bend Pipe Straight & U-Bend Kit

  • Cut out the middle man and build the perfect automotive exhaust system your project deserves!.
  • Universal kit includes all the necessary 3″ exhaust pipe bends and straights to allow you to run your own custom exhaust systems.
  • 3″ mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Each 3″ smooth mandrel bent tube is expanded on one end to allow easy slip-fit installation.
  • Includes 4 each: 45 degree bends, 90 degree bends, 180 degree bends, and 46″ inch straight pipe exhaust lengths.
Check Stock

Foam Pipe Insulation,Foam tubing for 1 inch Pipe ,25mm(1") ID 35mm OD 6.5 Foot Length Black

  • APPROX. SIZE – 25mm inner dia, 35mm outer dia, 5mm wall thickness, 6.5foot total length.
  • MATERIAL –The tubing is made of Rubber material, wear resistance, anti-aging, good elasticity, strong bending,Working temperature is -40°C to 80°C(-40°F to 176°F)..
  • ADVANTAGE –High elasticity, strong tensile, easy to bend, and aging resistant,Anti-skid foam is fixed on tools or appliances and is not easy to slip..
  • MULTIPLE USAGE – Household fitness equipment anti-collision pipe, industrial machinery anti-collision pipe, household fitness equipment anti-collision pipe, handle sponge cover, protection and insulation, water pipe insulation and insulation..
  • HOW TO USE – When installing the pipe, wet the steel pipe with lubricant and water, and then install a sponge, so it is easier to install the pipe..
Check Stock

Universal 2.5 Inch Custom Tubing Mandrel Bend Pipe Straight & U-Bend Kit

  • Cut out the middle man and build the perfect automotive exhaust system your project deserves!.
  • Universal kit includes all the necessary 2-1/2″ exhaust pipe bends and straights to allow you to run your own custom exhaust systems.
  • Mild steel exhaust pipes feature a natural, anti-rust coating for corrosion prevention.
  • Includes 4 each: 45 degree bends, 90 degree bends, 180 degree bends, and 46″ inch straight pipe exhaust lengths.
  • Each 2-1/2″ smooth mandrel bent tube is expanded on one end to allow easy slip-fit installation.
Check Stock

Speedway Motors Pickup Truck Mild Steel Mandrel Bend Dual Exhaust Pipe Kit, 2-1/2

  • Cut out the middle man and build the perfect automotive exhaust system your project deserves!.
  • Universal kit includes all the necessary 2-1/2″ exhaust pipe bends and straights to allow you to run your own custom exhaust system.
  • Mild steel exhaust pipes feature a natural, anti-rust coating for corrosion prevention.
  • Includes 4 each: 45 degree bends, 90 degree bends, 180 degree bends.
  • plus 6 46″ inch straight pipe exhaust lengths.
  • Each 2-1/2″ smooth mandrel bent tube is expanded on one end to allow easy slip-fit installation.
Check Stock

HomeProShop 350 Pcs Pipe Cleaners Craft Supplies - 6mm x 12inch Chenille Stems/Craft Pipe Cleaners in 30 Colors

  • High quality craft pipe cleaners - Let your imagination soar with these flexible, durable & high-quality pipe cleaners craft supplies. Their colorful, soft, and easy bend wire fiber is ideal for creating original designs or to wrap shapes for any pipecleaners craft kids will enjoy. Whether you're making flowers, fluffy characters, or small animals with googly eyes, be assured that these chenille stems are a big hit among children!.
  • Easy bend feature - Each pipe cleaner is designed with an easy bend feature, allowing you to roll it up into various objects. Made from rich and thick premium wire fiber, it's strong enough to hold up any shapes you create. The chenille stem is also soft, ideal to cut with a child-friendly pair of scissors. Learn to do simple crafts with our fuzzy pipe cleaners- from beautiful butterflies to bunny ears, the possibilities are endless!.
  • Great bonding activity - From parents, teachers, kids, to hobbyists and enthusiasts, crafting DIY projects with our pipe cleaners bulk supply is a surefire way to have fun. It's also an amazing way for parents to spend quality time with their children without the need for any high-tech gadget. Pipe cleaners also make an excellent gift or your artsy friends and relatives, a great addition to the....
Check Stock

W4-Moto 12 Ton Heavy Duty Hydraulic Tube Bender 180 Degree Tubing Metal Steel Iron Exhaust Pipe Bending with 6 Dies Sets 1/2",3/4",1",1-1/4",1-1/12",2" (RED)

  • ...Structure】Made of premium steel, this tube bender is heavy duty to hold up to 12 ton weight capacity. And the hydraulic system and pull-back spring system help you get the bending job done efficiently.Tube bender is suitable for most kinds of metal tubes, and it can easily and efficiently help to bend any type of pipes. Therefore, it is popularly used for power construction, road building, bridges or ships pipeline laying or repairing..
  • 【6 Adjustable Roller Levels 6 Dies】Bending bars can easily be adjusted to distances of 8-1/2", 11-1/4", 12", 16-3/4", 19-1/2" and 22-1/2", so you can adjust the top rollers for degree of bend to meet the bending angle of the tube.Except the pipe bender, the package includes 6 precision cast dies of 1/2'', 3/4'', 1'', 1-1/4'', 1-1/12'' and 2". So you don’t need to buy dies, this pipe bender is able to fully meet all your needs..
  • 【180 Degree Bending】Compared to other bender that only can bend tube to 90 degree angle, our pipe bender can bend tubing to angles up to 180 degrees smoothly so that reduce your workload and increase working effici....
Check Stock

XIFOWE Copper Tube 1/4 OD x 3/16 ID 5 Ft Tube Wall 1/32 Refrigeration Seamless Round Pipe Tubing Soft Coil Copper Tubing Used In Refrigerators Freezers Air conditioners DIY projects Etc

  • 【Size】✔ 1/4" OD - 3/16" ID (6.35-4.75mm) | Tube Wall: 1/32" (0.8 mm) | Length: 5 Feet (1.524M). Note that the actual length of the copper tube is slightly longer than 5FT because it is measured manually. In addition, when we cut the copper pipe, we used a ring cutter, which will deform the section surface, resulting in a smaller inner diameter from the section surface. Please rest assured that this will only affect the size of the section surface, but not the actual size of the copper pipe..
  • 【Material】✔Soft copper pipe copper pipe is made of high quality copper material, the surface is smooth without seam. Note, because it is made of pure copper, so the surface is inevitably easy to oxidation and discoloration, can be polished with high mesh sandpaper, will become bright and clean!.
  • 【Good Thermal Conductivity】: Good heat dissipation and refrigeration capability, high strength at low temperature. This is a good choice for refrigerators, freezers, air conditioners and other refrigeration equipment.
  • 【Shape Changeable】Soft, Because copper pipe can bend and deform, they can often be made into elbows and joints. Smooth bending allows copper tubes to bend at any angle. Or used in manufacture of magnetism instruments or meters..
Check Stock

WORKPRO Ratchet PVC Pipe Cutter Tool & WORKPRO 25FT Tape Measure

  • ...er Tool - Ratchet PVC Cutter is designed to OD up to 2-1/2"(63mm), ideal for cutting all kinds of plastic pipes and tubes (PVC, CPVC, PP-R, PEX, PE, Rubber hose, etc.), it is a must-have cutting tool for your handyman, plumber, electrician and vehicle mechanic.
  • WORKPRO Ratchet PVC Pipe Cutter Tool - The pipe cutting machine adopts ratchet transmission technology, which can successfully complete the cutting operation with one hand, cutting more labor-saving and improving work efficiency. The ergonomic spring-loaded handle provides a reliable grip and strong bite, increasing productivity with fast cutting, faster positioning and single-stroke cutting. Users can cut pipes in 5 to 20 seconds.
  • WORKPRO 25FT Tape Measure - The design of wrist strap and belt clip makes the tape measure easy to carry in various occasions.When your hands are not free, you can hang it around your waist or tie it around your wrist. Of course, the design of the strap also makes the product more convenient to hang and store.
  • WORKPRO 25FT Tape Measure - Clear scale markings every 1/8 inch, 1 foot, 1.5 feet make reading easier. And the minimum accuracy of the measuring tape is 1/32 inch, which enables more accurate measurement of items. The yellow background and black and red text make....
Check Stock

KAKA Industrial Heavy-Duty Hydraulic Roll Cage Tube Bender, Solid Construction and High Precision Metal Tube Bender (HB-10)

  • More space can be saved through removing the leg and hand pump.
  • at the same time, it is easily to storage if you have limited space.
  • The hydraulic pipe bender is build with heavy material that can last for many year demanding use.
  • The bending capacity can up to 10 ton that will satisfy most of the projects. It is a great tool for any pipe bending work shops.
  • Six standard dies are included in a way to increase the flexibility of bending.
  • the size of those dies are 1/2" , 3/4" , 1", 1-1/4", 1-1/2" and 2" respectively.
  • The HB-10 pipe bender has been designed for years of trouble free use under the most demanding conditions and it would be a money saver from long term perspective.
Check Stock

IDEAL Electrical 74-028 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1 in. EMT Pipes, Benders

  • Conduit Bender: ideally used to bend iron and metal pipes, the iron conduit bender offers application in electrical repairs and installation to fit pipes around all ceiling, corners, wall, and irregularly shaped passages.
  • Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Ductile EMT bender is suitable to bend 1 in. EMT metal pipes as well as 3/4 in. Rigid & 3/4 in. IMC pipes. It uses industrial standard Benfield b....
Check Stock

3 in 1 Tube Bender - Yellow Jacket 60390

  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • INCLUDED COMPONENTS: Bender body, crossbar, reverse bending attachment and mandrels for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7"8 tubing.
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe Cutter, 2 x Flip Arm, 1 x Trimmer..
Check Stock