ReviewsPiston Cylinder

Wiseco 1614CD Ring Set for 41.00mm Cylinder Bore

  • High quality nodular cast iron material,corrosion-resistant and durable.
  • Effectively sealed gas,improve gas efficiency,to ensure the strong power of engine.
  • Scraping excess oil on the cylinder wall to ensure proper lubrication of the cylinder and piston.
  • To prevent the piston and the cylinder wall in direct contact,to ensure smooth movement of the piston,reduce friction resistance.
  • Quality Assurance!If you are not satisfied with our products,we accept all of the return,replacement or refund requests.
Check Stock

Office Chair Gas Lift Cylinder-Office Chair Replacement Parts, Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston,Universal Size

  • STANDARD SIZE OFFICE CHAIR CYLINDERS REPLACeMENT: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace hydraulic piston on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the chair gas cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - STRONGEST ON THE MARKET: Our gas lift cylinder passed the top-level test of BIFMA and TUV certification, the highest End Class 4 chair piston on market, which are known as the most durable, longest lasting, and highest quality gas lift cylinders, they can lift up and down 120,000 times without fail and can be support up to 1000lbs..
  • 4.7’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 264mm to 385mm ( 10.39 - 15.15"), minimum length: 10.39 inches.
  • maximum length when fully extended: 15.15 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair....
Check Stock

HOSALI Office Chair Cylinder Replacement,Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston, Universal Size

  • UNIVERSAL SIZE THAT FITS MOST CHAIRS: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace gas lift cylinder on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - ANTI-EXPLOSION CYLINDER: Our office chair piston passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail, they built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than other gas lift cylinder you ever use..
  • 5.5’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 285mm to 425mm ( 11.22 - 16.7"), minimum length: 11.22 inches.
  • maximum length when fully extended: 16.7 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair smoot....
Check Stock

GOWE Engine Cylinder Liner kit for Isuzu Engine 4BG1 4BG1T Piston+Piston Ring+Cylinder Liner

  • Fit for Truck+EXCAVATOR+GENSET EX120 4BG1 4BG1T cylinder liner kit.
  • piston ring set made in Japan 1set=4cylinders.
Check Stock

Piston Kit Fits Husqvarna K760/K770 Concrete Saws 51mm Replaces Husqvarna Part # 506372403, 506372402 Two Day Standard Shipping to all 50 States

  • REPLACEMENT FOR OEM Part # 5HP-11631-00-A0, 4LS-11603-00-00.
  • REPLACEMENT FOR YAMAHA TTR 125 PISTON RINGS HEAD GASKET SET KIT TTR125 TTR-125 2000-2007.
  • THIS BRAND NEW AFTERMARKET PISTON KIT HAS BEEN INSPECTED FOR THE HIGHEST QUALITY & THE HIGHEST GRADE MATERIALS HAVE BEEN USED IN THE MANUFACTURE OF THIS KIT.
  • PURCHASE INCLUDES: STANDARD SIZE PISTON. PISTON RING KIT. PISTON PIN. CIRCLIPS. CYLINDER HEAD GASKET. CYLINDER BLOCK GASKET..
Check Stock

ABN Adjustable Ratchet Piston Installer Tool, 3in Piston Ring Compressor – Installation Compressing 2.1in to 6.9in

  • EASY PISTON RING INSTALLATION: The ABN 3” Inch Piston Ring Compressor is a ratchet-type lock mechanism with fingertip easy release thumb switch lever, hex spanner, and adjustable safety screws to allow for safe and quick install of piston rings by simple ring compression.
  • DAMAGE-FREE: Perform engine rebuilds and use this compressor for proper installation of the piston and rings in the cylinder without twisting or damaging parts.
  • Perfect fit on the piston and a positive locking action to compress rings and allow installation of pistons into cylinders.
  • WORKS ON VARIOUS PISTONS: Designed for use on the most common automotive piston and ring diameters ranging in thickness from 2.1-inch to 6.9-inch (53mm to 175mm).
  • Small enough to use on small engines such as push mowers and riding mowers.
  • Large enough to use on machine tractor pistons.
  • EASY TO USE: Use an oil lubrication (not included) on ring and piston before compressing.
  • Place piston inside the cylinder, tighten the compressor, lightly tap the piston into the bore with a rubber mallet (not included) while holding downward pressure on compressor.
  • BUILT TO LAST: Constructed from spring steel for maximum strength and longevity that resists corrosion.
Check Stock

TOP NOTCH PARTS REPLACEMENT FOR YAMAHA BANSHEE 350 CARBURETOR CYLINDER HEAD PISTON GASKET TOP END KIT 1987-2006

  • REPLACEMENT FOR OEM Part # 2GU-11311-00-00 2GU-11181-00-00 2GU-11111-00-00 2GU-11181-00-00 3GG-11351-02-00 2GU-11631-00-94 2GU-11610-01-00....
  • NEW REPLACEMENT FOR YAMAHA BANSHEE 350 CARBURETOR CYLINDER PISTON GASKET TOP END KIT 1987-2006.
  • THIS BRAND NEW AFTERMARKET KIT HAS BEEN INSPECTED FOR THE HIGHEST QUALITY & THE HIGHEST GRADE MATERIALS HAVE BEEN USED IN THE MANUFACTURE OF THIS KIT.
  • PURCHASE INCLUDES: 2x CYLINDER BLOCK. 2x CARBURETOR. 2x NGK SPARK PLUG. 10x CYLINDER BLOCK STUD. 4x GUIDE 2x PISTON. 2x RING SET. 2x PISTON PIN. 2x....
Check Stock

FICMAX Big and Tall Office Chair Ergonomic Executive Chair PU Leather Chair Lumbar Support Modern Computer Desk Chair Comfy Work Chair - with Flip-up Armrests Spring Cushion (H1-Black)

  • REVIVE YOUR CHAIR FOR SAVING MONEY: If your chair or stool starts sinking, leaking gas or failing, replace a gas lift cylinder instead of spending money on a brand new computer chair. You need a chair that supports you while you're at work, or at home, our replacement chair cylinder is built to last a lifetime, without any unwanted sinking..
  • STANDARD CYLINDER THAT FITS MOST CHAIRS: This office chair piston will fit almost every office chair on the market included salon chairs, executive chairs, work chairs, rolling stools. Stop worrying about disturbing anyone, they can freely lift and rotate your office chair smoothly and quietly. ( Please measure the dimensions before purchasing).
  • HEAVY DUTY CLASS 4 PISTON - STRONGEST ON THE MARKET: Our office chair cylinder passed the top-level test of BIFMA and TUV certification, the highest End Class 4 chair piston on market, which are known as the most durable, longest lasting, and highest quality gas lift cylinders, they can lift up and down 120,000 times without fail and can be support up to 1000lbs..
  • 5.5’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This desk chair cylinder extends from 285mm to 425mm ( 11.22 - 16.7"), minimum length: 11.22 inches.
  • maximum length when fully extended: 16.7 inches, allows ....
Check Stock

901901 Piston Bumper fit for Porter Cable FR350 FC350

  • 901901 Piston Bumper fit for Porter Cable FR350 FC350..
  • This part acts as a cushion when the piston/driver retracts back into the cylinder after being fired..
  • This Piston Bumper is located Cylinder Cap of nail guns..
  • Fit For FC350 Type 1, FC350 Type 2, FC350 Type 3, Fit For FR350 Type 1, FR350 Type 2, FR350 Type 3, Does NOT WORK for the FR350A model..
Check Stock

901901 Piston Bumper fit for Porter Cable FR350 FC350 (2 Pack)

  • 901901 Piston Bumper fit for Porter Cable FR350 FC350..
  • This part acts as a cushion when the piston/driver retracts back into the cylinder after being fired..
  • This Piston Bumper is located Cylinder Cap of nail guns..
  • Fit For FC350 Type 1, FC350 Type 2, FC350 Type 3, Fit For FR350 Type 1, FR350 Type 2, FR350 Type 3, Does NOT WORK for the FR350A model..
Check Stock

TOP NOTCH PARTS 440cc BIG BORE CYLINDER PISTON RINGS TOP END KIT FITS HONDA TRX400EX TRX 400EX 99 00 01 02 03 04 05 06 07 08

  • REPLACES OEM NUMBER 12100-KCY-670 12191-KCY-672 13011-KCY-670 13101-KCY-670 90601-KA5-000 13111-KCY-670 12251-HN1-003 12391-KCY-671 14560-KCW-851.
  • HONDA TRX 400EX 440cc BIG BORE CYLINDER PISTON TOP END KIT.
  • PISTON TOP HAS A CERAMIC COATING PROVIDING SUPERIOR HEAT RESISTANCE WHICH WILL EXTEND THE LIFE SPAN OF THE PISTON. * THIS IS THE BEST QUALITY KIT ON....
  • PURCHASE INCLUDES: 1X CYLINDER 1X PISTON. 1X PISTON PIN. 2X CIRCLIPS. 1X COMPLETE SET OF RINGS. 1X HEAD GASKET. 1X BASE GASKET. 1X HEAD COVER GASKET.....
Check Stock