ReviewsPiston Ring Compressor

7040 Piston Ring Compressor 5.4' Bore Kit For Cummins ISX, Caterpillar (CAT) 3400, C-15, Direct replacement of the PT-7040

  • Use on ISX, Caterpillar 3400 & C-15 5.4" bore Piston Ring Compressor..
  • Assures proper piston installation, reducing the possibility of broken rings..
  • Heavy duty cast steel coated with red finish, ensures an unparalleled long lifespan..
  • If you're not 100% satisfied with your items, simply return it for a full refund in 30 days. Premium Support & 12 Months’ Warranty..
Check Stock

Makita MAC5200R 3.0 HP Air Compressor (Renewed)

  • Quiet Series compressor design at only 58 dB for operator and crew comfort.
  • Compressor runs at a lower RPM (1,750) resulting in longer motor and pump life.
  • Complete roll-cage construction provides the compressor with protection to withstand a variety of job-site, transporting, and storage environments.
  • Oil-free dual-piston pump designed for maintenance-free operation.
  • Compressor features a lightweight design for increased job site portability, an oil-free dual-piston pump designed for maintenance-free operation, and a cord wrap for convenient AC power cord storage.
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • ...ke Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about your brake caliper piston tool getting mismatched and lost in a draw....
Check Stock

Makita MAC100QK1 Quiet Series 1/2 HP, 1 Gallon Compact, Oil-Free, Electric Air Compressor, and 18 Gauge Brad Nailer Combo Kit

  • Quiet Series compressor design at only 58 dB for operator and crew comfort.
  • Compressor runs at a lower RPM (1,750) resulting in longer motor and pump life.
  • Complete roll-cage construction provides the compressor with protection to withstand a variety of job-site, transporting, and storage environments.
  • Oil-free dual-piston pump designed for maintenance-free operation.
  • Compressor features a lightweight design for increased job site portability, an oil-free dual-piston pump designed for maintenance-free operation, and a cord wrap for convenient AC power cord storage.
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

Basic Colors Acrylic 16 Airbrush Paint Set for Model & Hobby Vallejo 71178

  • Professional Cool Running High Performance Single-Piston Airbrush Air Compressor with Air Storage Tank and Air Pressure Regulator with Gauge & Water....
  • Designed for the serious airbrusher, as it runs much longer without overheating.
  • Advanced technology single-piston compressor with built-in cooling fan and a longer duty cycle.
  • Provides "air-on-demand" and the air storage tank allows it to be delivered with constant pressure & zero pulsation.
  • Guaranteed quality and reliability with 5 year warranty.
Check Stock

ACDelco GM Original Equipment 24202583 Automatic Transmission Low and Reverse Band Servo Piston Pin

  • ㋡ Function: The piston pin used to connect the piston and the connecting rod, and transfer the force of the piston to the connecting rod or vice versa..
  • ㋡ Premium Quality: The piston pin made of excellent alloy steel material, reliable quality, high hardness, and durable..
  • ㋡ Application: The piston pin is used to directly replace old or damaged parts to improve performance and efficiency. Such as air compressor..
  • ㋡ Exquisite Craftsmanship: The piston pin smooth surface without burrs, corrosion resistance, not easy to rust, and has strong anti‑oxidation ability in humid environment..
  • ㋡ Specification: Length is approx.80mm / 3.1in, diameter is approx. 20mm / 0.8in..
Check Stock

XDovet Airbrush Dual Fan Air Storage Tank Compressor System Kit, Professional Airbrushing Paint System with 1/5 HP Air Compressor and 1 Airbrush Kits for Tattoo Makeup Shoes Cake Decoration

  • 【POWERFUL COMPRESSOR 】1/5HP high-performance, oil-free piston air compressor delivers 23-25L/min air flow.
  • 【CONSISTENT PERFORMANCE】XDovet Airbrush Model AF18 Cool Runner II superior performance powerful 1/5 hp single-piston compressor with two cooling....
  • 【AIRBRUSH 】Gravity feed, equipped with 20ml and 40ml paint cups for use in different scenarios, is the most common 0.3mm nozzle on the market. The....
  • 【MULTIPLE FUNCTIONS 】This airbrush covers a wide range of uses from commercial art, Hobbies, Crafts, Auto-Graphics, Temporary Tattoos, Cake....
  • 【BUY WITH CONFIDENCE】If you are not satisfied with this airbrush system at any time within the First Year of Purchase Or The Compressor At any....
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Blue

  • ... designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake caliper compression automotive tool is made of alloy steel, high strength, not easy to deform, which has corrosion resistance, the blue rivet handle is made of rubber, it conforms to ergonomic design, which is non-slip, comfortable grip, uniform force, will not hurt your hands during use..
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

  • ... designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake caliper compression automotive tool is made of alloy steel, high strength, not easy to deform, which has corrosion resistance, the red rivet handle is made of rubber, it conforms to ergonomic design, which is non-slip, comfortable grip, uniform force, will not hurt your hands during use..
Check Stock