ReviewsPla Container

PLA Filament 1.75mm, Dovov 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1kg Spool

  • 【Strengthen Toughness PLA Filament】 3D printer filament with high strength and better toughness. Ensure no clogging. Every print with high quality finish. Fit for complex structure 3D work with high toughness requirement and make sure no brittle during 3D printing jobs..
  • 【Eco-Friendly Materials and Vacuum Packaging】 The raw material for making pla 1.75 mm filament is CE certified. 1.75mm PLA printer filaments are made of degradable materials. PLA printer filament vacuum packaging with desiccant to keep it dry and prevent dust and foreign matter from entering, ensuring packaging to effectively protect the filament from moisture, no stringing and bubble-free..
  • 【High Accuracy & Consistency】30-40 times laser scan per second during production, ensure these PLA filaments of 1.75 mm diameter,Dimensional Accuracy +/- 0.02 mm.1kg spool (2.2lbs).
  • 【High Compatibility】The standard 1.75mm PLA printer filament is suitable for both 3D printers and 3D printing pens. pla filament recommended extrusion/nozzle temperature is 190-230 °(374°F-446°F).
  • 【No Winding & No Plugging】 Fully automated production, strict manual inspection, to ensure the PLA wire is neat and easy to feed.perfect roundness and tight diameter tolerance, does not overlap or tangle. ....
Check Stock

SUNLU PLA Meta 3D Printer Filament, High Toughness PLA Meta Filament 1.75mm , No Clogging, Highly Fluid, Fast Printing for 3D Printer,Dimensional Accuracy +/- 0.02 mm,1 KG Spool,Blue

  • ①【High Speed Printing & No Clogging】Smooth Squeeze.SUNLU 1.75mm PLA Meta 3D filament(Tolerance Level : ± 0.02mm).1 kg spool (2.2lbs),330m each spool.Minimum tolerance and low warping to ensure consistent feeding and fast prints,say goodbye to clogging.The perfect dimensional accuracy +/-0.02mm provide optimum flow through the extruder nozzle.PLA Meta is 1.5 times more fluid than regular PLA..
  • ②【Avoid Knotting & No Odour】SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure neat lines with few kinks, avoiding possible breaks.PLA Meta is a biological material, purified from corn grain, eco-friendly, odourless and harmless to humans..
  • ③【Impact Resistance & Energy Efficiency】High toughness and non-brittle PLA Meta printed parts can be sanded, drilled and painted.The PLA Meta filament is very tough and not easily brittle, the model does not break easily when dropped from a height to the ground.PLA Meta printing temperature: 180-200℃,low printing temperature printing for greater energy efficiency..
  • ④【Glossy Surface & Good Adhesion】Brightly coloured PLA Meta filaments bring glossy surface prints to....
Check Stock

SUNLU PLA Filament 1.75mm, 3D Printing Filament PLA Refill, Dimensional Accuracy +/- 0.02mm, 1kg (2.2lbs), Spool-Less Filament, Black PLA 1.75

  • ① 【SUNLU PLA 3D Filament】PLA 3D filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, easy to use..
  • ②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ③【High Compatibility Refill】SUNLU PLA 1.75mm filament refill is compatible with many brands of MasterSpool, MasterSpool is re-usable, a good idea in reducing waste and cost..
  • ④【1KG PLA 3D Filament】SUNLU 1KG PLA filament refill only includes 1 roll PLA 3D printer filament 1.75mm refill, no spool(spool-less). Please use with reusable spool(MasterSpool)..
  • ⑤【Recommend Settings】We recommend print the PLA filament at a nozzle temperature of 215-230°C, bed temperature of 60-80°C, printing speed of 40-80mm/s..
  • ⑥【SUNLU Professional Team】SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D filament, 3D printer, 3D pen, filament dryer, 3D resin and resin UV light curing box..
Check Stock

Zume Premium Compostable, Eco Friendly, Leak Proof, Disposable, 24 oz/750ml Medium Snap-Fit Lid, Natural (Pack of 100)

  • Karat 8-32oz PP Deli Container Flat Lids.
  • Matching Containers: FP-DC8-PP, FP-DC12-PP, FP-DC16-PP and FP-DC32-PP.
  • Units Sold By: Case 500 lids (50pcs per sleeve / 10 sleeves per case).
Check Stock

Creality PLA Matte Filament 1.75mm,Ender Upgrade CR Matte PLA, 2.2lbs(1kg)/Spool, Dimensional Accuracy +/- 0.03 mm,Fit Most 3D Printer,Strawberry Red

  • 【Creality Matte PLA】Creality CR matte PLA is Creality Official newly launched filaments can output prints with shine-free color and frosted texture, which make it perfect for creation needing low-key, rich and enigmatic appearance.Neat printing..
  • 【Easy Printing & More Convenient】Creality matte PLA Easy to print just like normal PLA, more likely to get quality prints with sharp details. Excellent threshold overhang angle. Raft and support are very easy to remove.
  • Larger spool inner diameter design makes feeding smoother.
  • 【Odorless & No Bubble】Creality matte PLA Developed based on PLA, this matte PLA filaments deliver excellent printing quality with no odor and low warpage during printing.
  • Dry vacuum packaging to effectively protect the filament from moisture, no stringing and bubble-free.
  • 【Dimensional Accuracy & Consistency】More reliable raw material supply chain manufacturing factory ensures that the diameter of these Creality matte PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm.
  • 【After Sale Worry-Free】Whenever or why, when encountering any Creality matte filament questions you can contact our shop seller, We will provide you with more satisfactory solution..
Check Stock

3D Printer Silk Filament SUNLU Shiny Silk PLA Filament 1.75mm，Smooth Silky Surface，Great Easy to Print for 3D Printers，Dimensional Accuracy +/- 0.02mm Silk Silver 1KG

  • ①【 Shiny SILK PLA Filament】Compared to regular PLA 3D printer filament, SUNLU SILK PLA filament has a glossy, smooth silky surface that does not....
  • ②【 Great Easy to Print】Feed smoothly and constantly without clogging the nozzle or extrude.Smooth SUNLU 1.75mm SILK PLA 3D filament(Tolerance....
  • ③【Avoid Knotting】SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely....
  • ④【Good Adhesion】SUNLU SILK PLA filament has the advantages of high purity with good adhesion and superb layer bonding.With SUNLU SILK PLA....
  • ⑤【Vacuum Packed & No Bubbles】SUNLU SILK PLA filament 3D printer filaments are all vacuumed sealed along with a desiccant pack.Vacuum packaging....
Check Stock

Inland PLA PRO (PLA+) 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Natural

  • PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA PLUS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA PLUS FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
  • EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, a....
Check Stock

Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - White

  • PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
  • EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Check Stock

Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Olive Green

  • PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
  • EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Check Stock

Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Black

  • PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
  • EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Check Stock

CC3D Silk PLA Pro Silk Red PLA Filament 1.75mm 1KG 3D Printer Filament Printing Material Shiny Metallic Red Silky PLA Plus Filament (Silk Pro Red)

  • 1. New Arrival:Silk PLA Pro filament. This ia an upgrade version of Silk PLA filament series from CC3D..
  • 2.Silk PLA Pro can be used under almost all FDM 3D printers on market..
  • 3.The surface of the Silk PLA Pro filaments itself looks matte,but the surface of prints finished have the same shiny metallic luster as Silk PLA..
  • 4.The advantage of Silk PLA Pro filament is that you can print more exquisite products. It reduces the probability of clogging when 3D printer of bowden drive extruder use with ordinary silk PLA..
  • 5.100% Satisfy Warranty: Within 24 hours reply,100% satisfaction guarantee.If you're not completely satisfied for any reason, contact us and we'll help you to sent it back and refunded.
Check Stock