ReviewsPlain Shank Roofing Nails

STINGER CN100B Pneumatic Cap Nailer 1 Cap Diameter 1 Nail Length Collated Cap Nails for Roofing Underlayment & House Wrap 0136252

  • FASTER INSTALLATION - Install roofing underlayment up to 50% faster with the 4.9 lb (2.22kg) pneumatic cap nailer.
  • FEWER RELOADS - Tool holds 200 caps and 200 nails for fewer reloads on the job site.
  • VERSATILE - Features bumpfire and sequential firing modes, 360° tool-free exhaust, tool-free depth of drive.
  • ACCESSORIES - The CN100B comes with a belt hook, air fitting, and a carrying case.
  • STINGER NAILS & CAPS - Use exclusively with STINGER 1” (25mm) NailPac, plastic collated caps and ring shank nails - part #s 0136260 and 0136264.
Check Stock

STINGER 0136260 NailPac Cap Nails - 1 Electro Galvanized Nails with 1 Plastic Collated Caps 0136260 for use with CN100B & CN100 Cap Nailers

  • SUPERIOR HOLDING POWER - 1” (25mm) plastic collated caps and 1”x.083” (25mmx2.1mm) full round head ring shank nails holds underlayment securely.
  • EASY RELOADS - Contains 10 reels of 200 collated plastic caps and 10 coils of 200 nails which covers 25 square.
  • WHERe TO USE - Use corrosion-resistant electro galvanized nails in areas more than 3,000 ft (914m) from saltwater.
  • MEETS ASTM REQUIREMENTS - Cap nails meet ASTM F1667 requirements and exceed ASTM D3161 and D7869-17 for wind and UV resistance.
  • BEST PRACTICE UNDERLAYMENT FASTENER - Use exclusively with STINGER CN100B for the best practice installation of roofing underlayment.
Check Stock

BOSTITCH CR2DGAL 1-Inch 15 Degree Smooth Shank Coil Roofing Nails (7,200 per Box)

  • For Use in the Bostitch RN46-1 Industrial Roofing Nailer.
Check Stock

Solid Copper Nails - 1.5 Inch Smooth Shank Roofing Nails - Slating Spikes - Perfect For Copper Flashing Install - Wide Flat Head Design - Decorative Finishing (5 oz)

  • Solid 1.5 Inch Copper Nails - Used For Roofing, Slating, Flashing, Decor.
  • Flashing Kings Corrosion Resistant Copper Nails Are Perfect For Mounting Our Flashing Products.
  • Order With Confidence Our Products Are Covered By The Amazon A To Z Guarantee.
Check Stock

findmall 3600 Count Coil Roofing Nails 7/8-Inch x .120-Inch 15-Degree Round Head Wire Weld Collated Smooth Shank Electro Galvanized Coil Roofing Nails for Roofs Lathing and Sheathing Materials

  • Material - The roll nails are made of galvanized materials and are not easy to rust..
  • Structural Features - 15-Degree Ring Shank..
  • Size - Measures 7/8 inch in length by 0.120 inch in diameter..
  • Application - Wire collated nails are used for both new roofs and reroofing, also for attaching waterproof tar paper, roofing felt, metal drip edges, insulation board, cementitious fiber board products and vinyl siding..
  • Package - You will receive 3600 pieces Siding Nails in a pack..
Check Stock

findmall 7200 Count Coil Roofing Nails 1-3/4-Inch x .120-Inch 15-Degree Round Head Wire Weld Collated Smooth Shank Electro Galvanized Coil Roofing Nails for Roofs Lathing and Sheathing Materials

  • Material - The roll nails are made of galvanized materials and are not easy to rust..
  • Structural Features - 15-Degree Ring Shank..
  • Size - Measures 1-3/4 inch in length by 0.120 inch in diameter..
  • Application - Wire collated nails are used for both new roofs and reroofing, also for attaching waterproof tar paper, roofing felt, metal drip edges, insulation board, cementitious fiber board products and vinyl siding..
  • Package - You will receive 7200 pieces Siding Nails in a pack..
Check Stock

Akord Nails Flat & Concrete Assortment Kit 420pc 1 to 2-1/2 Bright Steel Flat Head Nails Zinc Plated Hardened Concrete Nails,

  • MORE SIZES AND CHOICES: Selected 2 Types & 9 Sizes of Flat Nails & Concrete Nails to meet different needs. These bright steel flat head nails with plain shank, of which the longest length is 2-1/2", are suited to internal, general purpose timber to timber connections. These concrete nails use when fixing timber into concrete or brick, helical shank for greater holding power, with a zinc plated finish for protection against corrosion, internal use..
  • PRODUCT FEATURES: Bright & Zinc Plated surface treatment significantly improves their protective properties. Very strong and sharp, can keep the shape and not bend easily..
  • MULTI PURPOSE: Generally used in furniture, hanging photos, repairing or woodworking craftsmanship, these nails will be your best choice..
  • HANDY BOX: All of the Flat & Concrete Nails will be packed in a sturdy plastic box, can be used as a storage box. Not only give you the best Nails, but also the best storage system..
  • 30 DAYS REFUND WARRANTY: AKORD offers a free replacement or refund against any manufacturer defects. Please feel free to contact us if you have any questions about our products..
Check Stock

Grip-Rite GRCR3DGAL 1-1/4-Inch-by-15-Degree Galvanized Coil Roofing Nail (7,200 per Box)

  • 1-1/4-by-.120-by-3/8-inch diameter thin flat head.
  • "High Wire" collation compatible with most tools.
Check Stock

Grip-Rite GRCR2DCGAL 7/8-Inch by 15-Degree Wire Collated Galvanized Coil Roofing Nail (7,200 per Box)

  • 7/8" x .120" x 3/8" Diameter Thin Flat Head.
  • "High Wire" Collation Compatible with Most Tools.
  • Use with Grip-Rite GRTCR175 Coil Roofing Nailer.
Check Stock

Dubbs Hardware - 1.5 Inch Copper Nails Roofing Finish - Solid Pure Copper Slate Spikes Flashing Furniture Boat - Package Includes 10 oz of The Highest Quality Nails

  • PURE COPPER NAILS - Pure copper 1.5 inch roofing nails with a 3/8" head.
  • ROOFING NAILS - Great for roofing, boat building, or any other decorative projects.
  • INSTALLATION - To ensure no bending when hammering in, drill a 3/32" pilot hole for best results.
  • PACKAGE INCLUDES - Approximately 100 nails per 10 ounce pack of premium copper nail.
  • USA MADE - Proudly Made in the United States.
Check Stock

1\ Smooth Shank Solid Copper Roofing Nails 10 Gauge USA Made - Qty 100

  • Copper Roofing Nails are used in various roof installations, notably in slate roofs for their ease of removal if the slate needs to be replaced as well as their corrosion resistance and malleability..
  • They are also used for straps, gutters, and leaders as part of rain gutter systems, fascia installations, furniture restoration, and planked wooden boat construction. While designed for roofing, copper nails have other uses as well such as flashing and decorative finishing applications..
  • Copper roofing nails feature wide, flat heads for an increased bearing surface with diamond points and smooth shanks for ease of penetration. They are made entirely of solid copper and their corrosion resistance and malleability make them a good alternative to galvanized nails..
Check Stock