ReviewsPlansifter

CC3D Silk PLA Pro Silk Red PLA Filament 1.75mm 1KG 3D Printer Filament Printing Material Shiny Metallic Red Silky PLA Plus Filament (Silk Pro Red)

  • 1. New Arrival:Silk PLA Pro filament. This ia an upgrade version of Silk PLA filament series from CC3D..
  • 2.Silk PLA Pro can be used under almost all FDM 3D printers on market..
  • 3.The surface of the Silk PLA Pro filaments itself looks matte,but the surface of prints finished have the same shiny metallic luster as Silk PLA..
  • 4.The advantage of Silk PLA Pro filament is that you can print more exquisite products. It reduces the probability of clogging when 3D printer of bowden drive extruder use with ordinary silk PLA..
  • 5.100% Satisfy Warranty: Within 24 hours reply,100% satisfaction guarantee.If you're not completely satisfied for any reason, contact us and we'll help you to sent it back and refunded.
Check Stock

PLA 3D Printer Filament 1.75mm, SUNLU PLA Filament 1.75, Dimensional Accuracy +/- 0.02mm, Reusable MasterSpool, PLA 2kg, 1kg Spool, 2 Pack, Black+Transparent

  • ①【SUNLU PLA 3D Filament】PLA 3D filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, easy to use..
  • ②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ③【2KG PLA 3D Filament】SUNLU 2KG PLA filament MasterSpool includes 1 reusable spool(MasterSpool) and 2 rolls PLA 3D printer filament 1.75mm refills, '1+2' combination..
  • ④【Reusable MasterSpool】SUNLU MasterSpool is reusable, it's compatible with many brands of 3D printing filament refills(spool-less filament), which is a good idea to reduce waste and cost..
  • ⑤【Recommend Settings】We recommend print the PLA filament at a nozzle temperature of 215-230°C, bed temperature of 60-80°C, printing speed of 40-80mm/s..
Check Stock

ANYCUBIC Mega X FDM 3D Printer and ANYCUBIC PLA 3D Printer Filament(Grey + Black) Bundle

  • ① ANYCUBIC MEGA X 3D Printer, Large Metal FDM 3D Printer with Patented Heatbed and 1kg PLA Filament, Build Size 11.81in(L) X 11.81in(W) X 12in(H).
  • ② ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey.
  • ③ ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Black.
Check Stock

iSANMATE Wood Filament 1.75mm, PLA+ Wood Filament 1.75mm, 3D Printer Filament 1kg/Spool (20% Wood Powder+80% PLA)

  • 【Parameter】-iSANMATE Wood PLA+ Filament Print Temperature：190℃-225℃. iSANMATE PLA+ filament dimensional: 1.75mm,accuracy +/- 0.03mm, 1KG (2.2LBS)..
  • 【Wood PLA+】- iSANMATE Wood Filament is made up of 20% wood flour and 80% PLA+ with wood color and texture.Able to make products with woody touch.
  • 【High Quality】- iSANMATE Wood PLA + filament has superb layer bonding, and strength and toughness are greater than conventional PLA filament. Easy to use.
  • 【Spool Size】- Spool Diameter:197mm(7.76").
  • 64mm( 2.52") - Spool Hub Hole Diameter: 57mm(2.24")..
  • 【100% Satisfactory Service】-1 year warranty. Provide fast and efficient technical solutions when you have any printing problems. With 24 hours guaranteed reply..
Check Stock

3D Printer Filament Bundle, PLA Filament Silk Shiny PLA Filament 1.75mm +/- 0.02mm, 3D Printing Filament 200g x 4 Spools

  • PLA FILAMENT SILK SHINY 4 PACK – Pack of Gold Black Red, Gold Red, Silver Blue, Green Blue filament. New design pla filament come with silk and shiny, excellent gloss. Color change very fast, so you can get both colors in a small object..
  • SMOOTHLY PRINTING – With greater toughness, 3d printer filament feeding will be smoother and will not break in the tube. The dimensional accuracy of the PLA filament 1.75mm is +/-0.02mm, so that print will be smoother without jamming nozzles..
  • EASY TO PRINT FOR BEGINNERS – High Purity PLA filament with good viscosity between layers and no warping, 100% no bubble, less stringing filament, good shape, easy to remove support..
  • HIGH PURITY PLA FILAMENT – PLA raw material is made of corn starch and safe for kids. Perfectly 3d printing with 99% FDM 3d printer and 3d pen..
  • PROFESSIONAL PACKAGE – Vacuumed sealed with high quality desiccant to keep the PLA filament dry and keep out dust. 【In case of any quality problem, please feel free to contact us for after-sales service – return or refund fully.】.
Check Stock

Inland Clear PLA/PLA PRO (PLA+) 3D Printer Filament Reusable Spool, for Inland PLA/PLA PRO (PLA+) Refill only

  • 1.75mm 2.85mm filament PLA PRO PLA+ spooless refill 3d printer 1kg 2.2lbs spool+P3:U6.
  • Outer diameter 200mm, bore diameter 52mm, hub diameter 92mm, width diameter 54mm.
  • Does not come with Filament. Works with Inland 1KG 1.75MM PLA/PLA PRO (PLA+) Filament.
Check Stock

PLA 3D Printer Filament 1.75mm SUNLU PLA Filament Dimensional Accuracy +/- 0.02 mm 1 kg Spool PLA 1.75 Black

  • 【1KG(2.2 lbs) Spool】Spool Diameter: 8.00"-Spool Width: 2.50"-Spool Hub Hole Diameter: 2.20". SUNLU Strong Coils Design Help Your 3D Printing More....
  • 【1.75mm PLA Filament】SUNLU PLA 3D Printer Filament 1.75mm, PLA 1.75 Dimensional Accuracy +/- 0.02mm. No Pungent Smell in Printing, No Harm to User....
  • 【Tangle Less & Clog-free & Bubble-Free】Full Mechanical Winding and Strict Manual Examination, Which Guarantee the SUNLU PLA filaments tidy and....
  • 【High Compatibility】SUNLU PLA Filament Works Perfectly with Most FDM 3D Printers on the Market, Such as Ender 3, CR 6, A 8, CR 10, Maker Bot, Mono....
  • 【Recommend Settings】PLA Filament Extrusion/Nozzle Temperature 215-230℃, Bed 70℃-80℃. SUNLU 3D Filament are the Most Common Used Filaments....
Check Stock

3D Printer Filament PLA-Meta 1.75mm, SUNLU Upgraded 3D Filament for 3D Pen&3D Printer PLA Meta, High Fluidity, No Clogging, High-Speed Printing, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, Black

  • 【Good printing effect, 100% Bubble-Free】- New upgraded Universe series 3D printing filament PLA-Meta strictly guarantees neat lineup, no knotting, strictly guarantees ±0.02mm wire diameter difference, 100% zero bubbles. Ensure high efficiency printing, say goodbye to plugging..
  • 【Good fluidity, Strong resistance】- SUNLU 3D filament PLA-Meta is 1.5 times more fluid than ordinary PLA, About 1 times stronger than ordinary PLA and PLA+ in terms of impact resistance. The smoothness of the material discharge is excellent, reducing plugging, and the printed models are resistant to dropping..
  • 【Lower printing temperature, lower consumption】 - PLA meta filament melting point is 155℃-170℃, Recommended printing temperature is 180℃-200℃, lower than PLA 3D printing filament. Lower melting point and printing temperature, means more energy saving, reduce printer loss and extend the life of 3D printer. It can also greatly reduce clogging, drawing, and ensure stable feeding and stable printing..
  • 【New hue, Good Glossiness】- SUNLU upgraded 3D filament has a new hue to give you a new visual effect. PLA-Meta filament has good adhesion and super strong interlayer bonding, and the surface of the consumable has good glossiness, soft color and warm color,....
Check Stock

AMOLEN 3D Printer Filament Bundle,Wood PLA Filament 1.75mm Bundle,Wood Filament,Marble PLA,Sparkles Gold,Bronze,3D Printing Filament Bundle,225g X 4 Spools

  • ✔PLA FILAMENT BUNDLE - 225g Wood Filament,contacts 20% real Bamboo fiber,225g Marble PLA,225g Sparkles Gold,225g Bronze PLA Filament..
  • ✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
  • ✔PREMIUM QUALITY - The pla have good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. Amolen filament, which have premium quality, print Much More Smoothly..
  • ✔VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage.
  • ✔HASSLE FREE - AMOLEN is focus of special and better quality PLA filament. We provide professional 3D printing technical guidance and perfect customer service. Defective filament can be reissued or refunded fully. Why not choose AMOLEN 3D Printer Filament？.
Check Stock

SainSmart Light Weight Filament 1.75mm, LW-PLA Low-Density Active Foaming 3D Printer Filament for RC Planes Drone Parts and Cosplay, White PLA Filament, 1KG

  • [Reduced Weight]: Designed with active foaming technology, the SainSmart LW PLA Filament density of 0.54g/cm³ compared to 1.2 g/cm³ for regular PLA, means a huge weight reduction to your printed parts, perfect for stuff like RC planes and drones. The reduced weight enables lower wing loads and stall speed, allowing for overall better performance..
  • [2X 3D Prints with One Spool]: The foaming expansion of this LW PLA filament makes it possible for you to print at up to 2X Material flow so that you can print more with less material. One LW PLA roll equals up to 2.2 ordinary PLA rolls..
  • [Unlimited Customization]: The LW PLA filament will start expanding with certain printing temperatures above 210 ℃. By adjusting the printing temperature, speed, and flow during your print, you can customize the expansion effect by using different temperatures and speeds in a section on a model for varied density..
  • [Smooth Finish & Paint Friendly]: Models printed with this LW PLA filament has a smooth matte surface with minimum layer lines. The improved paint adhesion also sets no limit on your creativity..
  • [Perfect Materials for RC Planes]: The expanding property of this PLA Filament allows for excellent layer bonding, better drop resistance and repairability. In combinat....
Check Stock

IEMAI Carbon Fiber PLA 3D Printer Filament, Carbon Fiber Filament 1.75mm, PLA Filament Spool 1KG, Dimensional Accuracy +/- 0.02mm Black Filament for 3D Printer

  • IEMAI CARBON FIBER PLA 3D PRINTER FILAMENT - 100% virgin material without cheap plastic fillers, Vacuumed Sealed With Desiccant. Carbon Fiber (containing 20% carbon fiber , in weight) is combined with PLA to form a strong plastic which is ideal for printing items requiring added strength, more abrasive than standard PLA..
  • PLA Filament -- Material : 80% PLA filled with 20% Carbon fiber . Weight: 1 KG (approximately 2.20 lbs) . Color: Matte Black . PLA filament is made of high-strength, high-modulus fiber material, full mechanical winding and strict manual examination, which guarantee the filaments tidy and easy to be fed. Works perfectly with most FDM 3d printers on the market, such as MK3, Ender 3, Monoprice FlashForge and etc..
  • PLA 1.75 mm - High Dimensional accuracy - 1.75 mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing. Recommend Printing Temperature: 190℃-220℃/374°F-428°F( dependent on printer model). Recommended Print Speed: 50-100mm/s. Heat Bed temperature: 50 – 60°C/122°F-140°F..
  • Carbon fiber filament is a tough material with a nice matte finish. The increased strength provided by the carbon fiber particles contributes to greater dimensional stability, helping to avoid warping and....
Check Stock