ReviewsPlasterboard Anchors

T.K.Excellent Heavy Duty Zinc Plated Steel Molly Bolt Hollow Drive Wall Anchor Screw Set for Drywall,Multiple Sizes Assortment Kit, 68 Pcs

  • Hollow wall anchors are designed for use in thin or hollow walls such as drywall, plasterboard, and other board materials..
  • They're heavy duty and can be used on internal & external locations..
  • Constructed of high-quality materials for long-lasting durability..
  • This pack can be use for radiator brackets & kitchen/bathroom cabinets..
Check Stock

T K Excellent Heavy Duty Zinc Plated Steel Molly Bolt Hollow Drive Wall Anchor Screws Set for Drywall,Multiple Sizes Assortment Kit 68 Pieces

  • Hollow wall anchors are designed for use in thin or hollow walls such as drywall, plasterboard, and other board materials..
  • They're heavy duty and can be used on internal & external locations..
  • Constructed of high-quality materials for long-lasting durability..
  • This pack can be use for radiator brackets & kitchen/bathroom cabinets..
Check Stock

Elephant Anchors [50 Sets+ Drill Bit] - TV mounting Bolts for TV Mount into Drywall & TV Mount into Metal Studs Dual Use Drywall Anchors When no Studs or anchoring into Metal Studs

  • ...s , washer and drill bit are included..
  • A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board..
  • Heavy Duty Mounting - Perfect for TV mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!.
  • Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel.
  • plastic straps attached to the channel that position it into place.
  • and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material..
  • A Hold You Can Trust - The CondoMounts anchor channel will not rotate when installing the bolt, whether installing by hand or with a drill driver, and will stay in place if the bolt is removed to facilitate fixture and screw changes..
Check Stock

WETNFIX 20 Discs - Fixing Wall Anchors Fast! Ideal for Loose Wall fixtures Such as Curtain Rails Toilet roll Holders Ideal for Drywall and Masonry.

  • Specifically created to solve the commonest DIY problem - securing wall plugs/anchors in weak crumbly masonry or oversized holes or fittings which have come loose with repeated use..
  • It is ideal for fittings such as curtain rails, shelves, toilet roll holders, towel rails, hooks etc..
  • Suitable for most materials, including masonry, wood, ceramics and plasterboard.
  • If you have a wall in your home or office, you need WETNFIX in your tool box..
Check Stock

Heavy Duty Metal Setting Tool, Paick Hollow Wall Metal Cavity Anchor Plasterboard Fixing

  • HIGH GRADED SETTING TOOL - This hollow wall anchors gun has a high strength steel body with drop forged carbon steel upper handle. Thicker steel & chromium alloy wrench ensure greater durability and longer lifetime..
  • ONE-HANDED OPERATION - Heavy duty metal setting tool size: approx. 6.88" x 2.75" x 0.98". Small but powerful, it can work perfectly in one-handed operation. With ergonomic type shape non-slip grips, protects you from getting hurt when using it..
  • HOW IT WORK - For setting cavity wall fixings into hollow stud walls accurately and quickly. Place Anchor into pre-drilled hole, attach setting tool and squeeze trigger..
  • WIDELY APPLICATIONS - Perfectly works with M3/M4/M5/M6 Molly Bolts for cavity anchor plasterboard fixing, widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
  • PACKAGE CONTENT - In this kit, it include a heavy duty gun with 5 size of 4x32mm, 4x60mm, 5x52mm, 5x65mm, 6x52mm total 18pcs molly bolts, convenient for your use and storage..
Check Stock

Saurka Horizontal Bike Wall Mount Rack Folding Bicycle Mount Hanger Hook Holder Storage Rack for Indoor Storage 360 Degree Adjustable Angle to Keep Your Bike Level

  • The wall hanger's angle (360¡ã) can adjust to keep your bike level.Folds up when not in use to save space.
  • Suitable for most conventional bike frames. Hanger beam length is adjustable 9.8-14 inches and Movable hook width adjustable from 11.8-15.7 inches to....
  • Solid Steel Construction for maximum durability makes this hanger safe for bikes to hang on the wall,110 lbs/50 kg weight Limit.The double arm hanger....
  • Suitable for All Kinds of Bikes. Such as Mountain Bikes, Folding Bikes, Road Bikes, Beach Bikes, etc. You can also use it as a Bike Repair Stand. A....
  • Mount hanger on masonry or concrete wall with anchors. Do not mount hanger on plasterboard wall or dry wall unless there is a wood stud behind. If you....
Check Stock

Ibera Horizontal Bike Wall Mount Hanger, Indoor Bicycle Hook Holder Storage Rack for Home or Garage, 45 Degree Adjustable Angle to Keep Bike Level

  • The wall hanger's angle (45°) can adjust to keep your bike level. Correct height for hanger tyres should sit atleast 4 inch off floor or ground. Bracket must be mounted 2 hole side up.
  • Designed as a horizontal mounting wall hanger for a single bike to save floor space. Weight limit- 39.6 pounds.
  • The sturdy and durable construction made out of aluminum makes this hanger safe for bikes to hang on the wall.
  • The double arm hanger has padded ABS arms to keep the bike secure and protects against paint damage.
  • Suitable for most conventional bike frames. Hanger beam length is adjustable to fit narrow or wide handlebars.
  • Mount hanger on masonry or concrete wall with anchors. Do not mount hanger on plasterboard wall or dry wall unless there is a wood stud behind. If you have any questions about the installation, seek for professional help..
Check Stock

KURUI Heavy Duty Garage Hooks for Hanging 6Pcs Large Garage Storage Hooks for Extension Cord Tool Cable Black Wall Mount J Utility Hooks with Wall Anchors and Screws

  • ... - Installing these garage storage hangers is as simple as turning the screw end against the wood and then tightening it until it is snug on the board. This makes installing garage storage hangers a breeze. It is necessary to pre-drill holes and use anchors when installing shelves on brick walls, concrete walls, or plasterboard walls..
  • WHAT YOU GET - You will receive 6 Heavy Duty Garage Hooks, 12 wall Anchors, and 12 wood screws. KURUI is committed to the quality of our products and places a high value on the satisfaction of each and every one of our customers. Please don't hesitate to contact us if you have any inquiries regarding this garage hooks set.
Check Stock

ISPINNER Wall Anchor Setting Tool with 18pcs Molly Bolt Hollow Drive Wall Anchor Screws Assortment Kit, Heavy Duty Anchor Gun for Cavity Anchor Plasterboard Fixing

  • ★High Quanlity :Power tool is made of solid metal with non-slip rubber grips. Hollow wall anchor are made of stainless steel with high quality zinc plated..
  • ★WALL ANCHOR BOLTS – multiple sizes to deal with all manner of requirements..
  • ★Hollow wall anchor expansion when installing, providing strong bearing capacity and safety.The strength of the anchor is relative to the size of its spread..
  • ★Including:4x32mm 5pcs,4x38mm 5pcs ,5*37mm 5pcs ,5*52mm 5pcs ,6*52mm 5pcs ,6*65m 5pcs,Hollow Anchor Gun 1pc.Total 31pcs ,packed in a durable box, convenient for your use and storage..
  • ★Application:Hollow wall anchors are designed for use in thin or hollow walls such as drywall, plasterboard, and other board materials.Perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
Check Stock

Zinc Self-Drilling Drywall Anchors with Stainless Steel Screw Kit Heavy Duty Metal Wall Anchors and #8 x 1-1/4 Inches Screws 80 Pieces in Total

  • High strength, easier to start than other self-driving anchors. No need to prepare holes when used on drywall/hollow walls. It can hang up to 50 pounds..
  • They are easy to take out and convenient to store when in use..
  • High-quality and environmentally friendly zinc materials: Zinc materials are more durable than nylon or plastic materials. The gypsum board adopts the principle of thread anchoring to achieve firm bonding on the gypsum wallboard and bear a larger load..
  • Scope of application: only suitable for manual or electric tools to screw into gypsum board/gypsum board at low speed. It can also be used for lightweight concrete, hollow bricks, porous bricks, lime sand bricks and other soft substrates. If the substrate is thick or hard, please drill a 6mm hole in it in advance..
  • Note: When screwing the screw to the end of the tube, the screw will penetrate the tube and push to open the tip of the tail. This is normal so that it can be more closely embedded in the plasterboard..
Check Stock

LAOSGE 2 Pack Garage Storage Utility Hooks Garage Garden Tool Organizer Hanging Utility Wall Mount Hooks Heavy Duty U-Hooks Tool Storage Organizer

  • [Great Garage Organizer]: This hooks are designed for heavy duty tools storage, especially in where like garage, shed, basement. You can use it for holding ladder, chairs, blast blower, cart, bicycles, garden hoses, sports equipments and other power tools and bulk items..
  • [DURABLE AND STURDY]: Made of high quality materials and heavy duty solid steel, this Garage Hooks is aim to endure heavy weights and prevent slips for years of use! Ideal for organizing your home!.
  • [Heavy Duty]: With the double-L style design and thick steel material and thick screws, it make the hooks firm enough, the maximum weight upto 55lbs. Such hooks can be mounted on drywall, concerte wall, stud wall, joist, plasterboard..
  • [ANTI-SLIP AND WATER RESISTANT]: These garage hanger are anti-slip PVC coated to help grab on to items and keep them securely in place..
  • [EASY TO INSTALL]: To install the U-hooks, just place the tip of plastic anchors on the spot you marked and fasten the screw by using screwdriver.Our wall hooks fit on drywall, wall stud and other wall types neatly and quickly. You can choose different screws included according to different wall structure..
Check Stock