ReviewsPlastic Angle Measurement Tool

PREXISO Angle Gauge Magnetic, Angle Finder - Digital Level Electronic, Protractor Angle Cube Inclinometer for Woodworking, Table Saw, Construction, Masonry, Machinery, 0-360° Bright Backlit Display

  • 2 Measurement Modes & 4 Units – Turn on the equipment to directly enter the ABSOLUTE measurement mode, and press the ZERO button to switch to the RELATIVE measurement mode.
  • This equipment fast measurement displays angles in degrees, %, mm/m and IN/FT.
  • Magnetic V Groove Base & Auto Reversible Display – The pocket angle finder features sturdy V groove edges, a strong magnetic base.
  • When upside down, the LCD display with backlight auto rotates, ensure fast and clear reading.
  • TIPS: If the angle gauge is used in an incorrect position (tilts diagonally over 30 degree), screen display ERROR to remind users to use correctly.
  • Accurate Angle – This angle finder tool measures, sets angles, and if a surface is level.
  • PREXISO angle gauge has higher resolution of 0.05°and higher accuracy of ±0.1°at 0°and 90 °, and ±0.2°at other angles.
  • The measuring range is 0 to 360° (4×90°), buzzer will alert when it’s within ± 1° to the horizontal or vertical position.
  • Compact Design & Calibration Function – Mini angle gauge fits in your pocket or the storage bag that comes included to protect the equipment surface from wear.
  • The equipment has been calibrated in the factory. In order to ensure lasting accuracy, the equipment also has calibration function, so ....
Check Stock

Stair Tread Template Tool, Stainless Stair Tread Gauge Tool Shelf Stair Jig Layout Tool Box, Measuring Gauge Range 10.2in to 53.3in, Suitable for Complex Stair Treads by AnoleX

  • ...mplate tool provides the greatest help when you install the stairs, it can measure the length and width of the stair treads, and it can also measure the rotation angle of the spiral staircase. In addition, this stair gauge can also be used for deck floors, wall frames, window sills, shelves, closets, partitions for measurement and angle placement..
  • 【Flexible Use】Stair tread gauge tool with three sizes of 8&12&16 inches extension rod, can slide and adjust in the range of 10.2 to 53.3 inches. The 10 inch stainless steel plates on both sides with scale and angle measurement (0° to 360°) can be combined and stretched arbitrarily according to your needs to meet the measurement of different corners. The stair ruler is easily adjusted and securely locked in place with four knobs..
  • 【Sturdy Material】The stair measurement tool is made of 304 stainless steel scale plate and is covered with chemical-resistant environmentally friendly coating materials, which can effectively prevent moisture or rust, and it will not wear for a long time, and it is strong and durable..
  • 【Precise and clear scale】The clear radium engraving on the surface of the stair tread and shelf gauge will not fade after long-term use. All scales are strictly inspected and calibrated b....
Check Stock

Mecurate Miter Saw Protractor, Inch/Metric Miter Protractor with Bobble Level, Miter Cut and Single Cut for Crown Molding

  • 【Accurate & Durable 6" Angle Finder】Made by durable ABS plastic, the protractor with accurate laser engraved scales and level bubble. Reliable to measure accurate angles for crown molding and a variety of other carpentry applications..
  • 【Two Measures, One-glance Conversion】The angle finder is featured with inside & outside scales to measure angle for single cut and miter cut. The angle conversion table on instruction converts right angle to your miter saw..
  • 【O-ring Design, Make Right Angle】The O-ring mechanism is full 360 degrees rotation, easliy to adjust and capture angle measuring. 6" angle measuring tool, Easy to carry and store..
  • 【Combination for Functions】Integrated with spirit level, ensure to hold the protractor on same plane to get accurate angle. Inch / CM combination enables quick measurement.
  • 【Versitility, Won't Miss Out】No matter trim widow & door, or cut tight-fitting joints, this carpenter tools measure angles to get right joint surface. It's essential for carpentry, molding, plumbing and metalworking..
Check Stock

RISEPRO 10-Inch Digital Torpedo Level and Protractor IP54 Protected Electronic Bubble Inclinometer, Angle Finder, Gauge w/Large VA Display & V-Groove Base DL135N

  • RELATIVE OR ABSOLUTE ANGLE MEASUREMENT - The regular absolute measurement mode can measure the angle against horizontal plane. This tool also features with relative measurement mode for quickly measuring angle between two measured surfaces..
  • EASY READABLE VA DISPLAY & SWITCHABLE UNITS – Clear and bright VA display allows you to use this device in the dark without light. Display modes can be converted from degrees (') to percent (%), to (mm/m), to pitch (IN/FT)..
  • STRONG MAGNETIC V GROOVE BASE & HOLD FUNCTION - The V Groove base with strong magnets enables strong attachment over a curve or cylindrical magnetic surfaces such as metal pipeline or shafts. Hold function helps save the current angle on the display..
  • SMART AUDIBLE BUZZER - This inclinometer has beeper sounds feature at horizontal position (0°) or vertical position (90°) which makes you more convenient and easier when it is in use. You can also listen it where you are unable to see the display..
  • WIDE APPLICATIONS – Great tool for automotive, wood & mechanical industries, machinery, medical fields....
Check Stock

Multi Angle Tool,Multi Angle Measuring Ruler,6-Sided Angle Measurement Tool,Multi Angle Aluminum Alloy Measuring Ruler,Multifunctional Measuring Ruler,Layout Tool for Handymen, Builders, Craftsmen.

  • ✎Laser engraving: This angle measuring instrument is scaled with special laser engraving technology. It is very wear-resistant and can be used for a long time without worrying about corrosion. There are two displays in metric and imperial systems, which are very suitable for precise angle measurement. Other rulers are different. , They will not wear out and disappear due to the use of too long scale, and the digital scale will remain on the ruler forever..
  • ✎Easy to carry: The six-fold angle measuring ruler is an excellent portable tool, easy to fold, save space and easy to store, you can even put them in your clothes pocket and carry them at any time, or put them in your backpack, a small one Pockets can hold them..
  • ✎Multiple uses: Super convenient precision tools make difficult tasks easier, multi-angle aluminum measuring rule general layout tool is convenient to create bull's eye, arch, plumb cutting and any project you can think of, very suitable Carpentry, brick, tile, wood, glass, stone, laminate, construction and engineering projects and more! It is an ideal template tool for carpenters, bricklayers, craftsmen, handymen, and DIY..
Check Stock

Upgraded woodworkers Edge Ruler Thickness 1.5mm Approximately 15in .0-70 Degrees Adjustable Protractor ,Multifunctional Construction Ruler JXHONG

  • Ruler thickness 1.5mm approximately, much stronger than others(0.8mm typically).The ruler dial is made of plastic with good hardness. it has a long service life..
  • woodworking ruler is a multifunctional device for length measurement and angle drawing.this tool for every woodworkers and mechanics..
  • The protractor can be adjustable from 0 degree to 70 degrees and firmly locked every 5 degrees..
  • Loosen the nut first , adjust it to a suitable angle , and then tighten the nut to fix it at this angle . Pick up the stroke line , and then go to the next step ..
  • Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store..
Check Stock

General Tools 102 0-Inch to 1-Inch .001-Inch Graduation Micrometer

  • 【Material】- This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Parameter】- 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles..
  • 【Comprehensive Angle Range】- This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °..
  • 【Suitable Utilization】- Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills..
  • 【Professional Measurement Tool】- This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection..
Check Stock

Woodworking Edge Ruler, 0-70 Degrees Adjustable Protractor ,Multifunctional Construction Ruler, Angle Measuring Ruler,Thickness 1.5mm Approximately .(20in)

  • Ruler thickness 1.5mm approximately, much stronger than others(0.8mm typically).The ruler dial is made of plastic with good hardness. it has a long service life..
  • woodworking ruler is a multifunctional device for length measurement and angle drawing.this tool for every woodworkers and mechanics..
  • The protractor can be adjustable from 0 degree to 70 degrees and firmly locked every 5 degrees..
  • Loosen the nut first , adjust it to a suitable angle , and then tighten the nut to fix it at this angle . Pick up the stroke line , and then go to the next step ..
  • Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store..
Check Stock

Stainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)

  • FUNCTION:woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work.
  • PRECISION:The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 18in, and the smallest scale is accurate to 1/32in. There are 144 serrated notches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • MATERIAL:The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
  • T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index ....
Check Stock

MiLESEEY Laser Measurement Tool 200ft, Curved Surface Measurement with Wheel, Digital Tape Measure, Pythagorean, Distance, Area and Volume Point to Point Measurement with Laser Line Marking Function

  • 3 IN 1 LASER MEASURE: Not only a laser tape measure, but also built-in smooth wheel to measure curve surface & columnar items, measure arc length easily without complicated calculate, save your time. With a built-in Gyroscope Chip, R2B laser tape measure has advanced Point-to-Point (P2P) measurement technology. It will compute the distance between two points, regardless of height or angle..
  • LASER LINE MARKING & ANGLE SENSOR: Long press to enter the laser line marking function, mark the red laser line on the target, the real-time angle of laser line is displayed on the screen, and it varies with the angle of device. It can provide us with collimated indicator lines for manufacturing, industry, construction. It can also automatically measures the angle due to the built-in electronic angle sensor. It will help you complete measurements quickly and accurately..
  • 50 GROUPS DATA MEMORY & LARGE LCD COLORED BACKLIGHT: This laser measure provides accuracy up to ±1/16 In., and remembers the last 50 measurements taken. With backlight LCD Colored screen, it provides you better visibility in dark areas. MiLESEEY laser measurement tool is safe, laser class 2 and laser tape 635nm .
Check Stock

Digital Angle Finder Protractor 2-in-1 Digital Miter Saw Protractor 7 Inch/200mm ABS Angle Ruler High Accuracy Miter Angle Measuring Tool for Woodworking Metalworking Carpenter Construction

  • ...le ruler and a protractor makes it easy to measure internal and external angles. Great gift for those who work in woodworking, construction, and engineering..
  • 【Premium ABS Miter Saw Protractor】The ABS material is lightweight, hard & durable, which can prolong the service time of this protractor. Laser etched measurements offer clear readings and years' usage. It comes with a CR2032 button battery inside, you can use it directly when you receive it. We also give you an additional battery as a spare..
  • 【High Accuracy Measure Angles Tool】Digital protractor is equipped with a large LCD display for easy reading. The accuracy is ±0.3°. The digital angle gauge supports measurement between metric(mm) and imperial(inch), making it can measure the length (0~200 mm/0~7 inch) conveniently and accurately. This angle rule allows a full range of 0~999° to measure..
  • 【Angle Finder with Locking Function】 To read it easily, this woodworking tool could be locked at any angle, and pressing the HOLD function button will hold the reading. Zeroing button to reset the angle finder tool at any time. It also comes with a Reverse Function Button, When you measure a large angle and do a reverse measurement, long press the Rev button, and the display could read up-....
Check Stock