ReviewsPlastic Bar Stock

1' X 6' ALUMINUM 6061 FLAT BAR 6' long T6511 Solid Extruded Mill Bar Stock

Easy to machine or weld aluminum rod for milling or lathe work in a variety of applications and industries.
All aluminum bars are sourced from 100% domestic products and mill certifications are available upon request.
6061 commercial grade aluminum stock is known for its exceptional toughness and high strength-to-weight ratios.
General purpose aluminum round bar for prototyping or production runs including machining and finish coatings such as anodizing.
Aluminum bar stock is an exceptional building and project material that will not rust and will last for years to come.

Check Stock

Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers

...plied On Both Sides, Bar And Pipe Clamps Will Almost Certainly Bow, Buckle Or Rack Your Panel Glue Up Project.
Let’S Make Racked Panel Glue Ups A Thing Of The Past. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time.
Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock.
Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clamp Every 12” To 18” For Best Results..

Check Stock

Brass Flat Bar 10mm Thickness x 25mm Width x 152mm Length C360 Brass Flat Bar Stock 6 Long Solid Plate Mill Stock

✿ If you are a lover of DIY crafts, you should prepare this brass flat bar, because it is indeed widely used and multifunctional, you will definitely use it..
✿ Brass bar stock is made of brass material,has nice bend-ability and good processability, you can use it according to your requirement..
✿ Brass bar has high strength, high hardness and good plasticity. It can still work well under hot condition and has good corrosion resistance..
✿ Our brass stock is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use..
✿ Widely used in knife, jewelry, DIY craft making, maintenance, electrical, architectural decoration, milling, lathe, etc.

Check Stock

1/4' Beadlock® Tenon Stock, (25) 1-1/2' Pieces

So Fast, So Easy, So Accurate. The arms of self centering dowel jig jig are an always-reliable parallelogram that never fails to find dead center. Simply align the precision-machined notch on the jig's center bar with the dowel location mark on your board, hold the jig and drill..
The second alignment feature lets you drill a series of equally spaced holes along the edge of a board. Just attach the supplied pin in the center bar, insert the pin in a hole and drill more holes..
Attach the jig's adjustable center bar end-stop for drilling two or three precisely spaced end grain holes. This feature allows perfect alignment of face frame stiles and top and bottom rails. The handy inch scale lets you accurately set the stop..
Adjustable width for different thick，For stock from 5/8" to a full 1” thick and more. The parallel arms open to accommodate stock up to 2.4” thick..
High quality aluminum (drill guide) and die steel(bushing),high hardness and strength,good wear-resistant and durable to use,the drill bushings is in imperial (inch) sizes,1/4" 3/8" 5/16" ,not metric..

Check Stock

C360 Brass Square Bar 25mm Thickness x 25mm Width x 130mm Length Brass Square Bar Stock 1 x 1 x 5 Solid Flat Mill Stock

✿---- If you are a lover of DIY crafts, you should prepare this brass square bar, because it is indeed widely used and multifunctional, you will definitely use it..
✿---- Brass bar stock is made of brass material,has nice bend-ability and good processability, you can use it according to your requirement..
✿---- Brass bar has high strength, high hardness and good plasticity. It can still work well under hot condition and has good corrosion resistance..
✿---- Our brass stock is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use..
✿---- Widely used in knife, jewelry, DIY craft making, maintenance, electrical, architectural decoration, milling, lathe, etc..

Check Stock

OTC Tools 7177 Heavy Duty Extendable Indexing Pry bar

Heavy Duty 13/16 inch hex stock bar graduated for extension has 31 preset positions in 5/8 inch increments.
Pry bar head pivots a full 180 degrees and can be locked in 14 positions.
Heavy Duty - spring loaded pins adjusts and secures bar length and head angle.

Check Stock

C360 Brass Flat Bar Stock 1/8 x 1 x 6 Knife Making Brass Bar Stock

✔ Ideal brass stock for knife making, no matter you are a professional or amateur knife maker, this is your best choice, you will never be disappointed..
✔ Brass bar is made of solid brass material,has nice bend-ability and good processability, you can use it according to your requirement..
✔ Brass bar has high strength, high hardness and good plasticity. It can still work well under hot condition and has good corrosion resistance..
✔ Our brass stock is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use..
✔ Widely used in knife, jewelry, DIY craft making, maintenance, electrical, architectural decoration, milling, lathe, etc..

Check Stock

Air Venturi Avenger, 0.25-Caliber Regulated PCP Air Rifle, Synthetic Stock

POWERFUL AIR RIFLE: The Avenger air rifle is lightweight, highly adjustable, and extremely capable, all at an affordable price. This high-powered PCP rifle weighs about 6 lbs., has a fully shrouded barrel, and has either a synthetic or wooden stock..
AIR-GUN ACCESSORIES: Our high-powered air rifle has an 11-millimeter dovetail/weaver combo rail to fit most scope mounts. It also has a Picatinny rail section on the fore-end of the stock for mounting accessories like bipods, lights, and lasers..
REPEATING AIR RIFLE: This PCP has an externally adjustable regulator up to 3,000 psi/210 bar and a max-fill pressure of 4,351 psi/300 bar. This pneumatic pellet gun features a two-stage adjustable trigger and a manual safety..
SUPERIOR EXPERIENCE: When you are hunting, you don't want to fumble with your air gun. This PCP repeater air rifle has holes in the front and rear of the stock for mounting swivel studs for a sling, making it great for carrying through the woods..
AIR VENTURI: Since 2010, we've been an innovator in the air guns and accessories industry. Our quality air gun equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..

Check Stock

2 pieces 1/4\ X 2\ ALUMINUM 6061 FLAT BAR 24\ long T6511 .250\ Plate Mill Stock

【Size】4"（100mm）X4"（100mm）X1/2"（12mm）【1Pcs】.
【Material】6061 Aluminum，This is a thoughtful piece of aluminum bar.
【Feature】 Lightweight, General-Purpose Aluminum，Easy to Machine or Weld.
【Wide Application】6061 aluminum stock is known for its exceptional toughness and Lightweight.General purpose aluminum bar for prototyping or production runs including machining and finish coatings such as anodizing,Aluminum stock is also an exceptional project material that will not rust and will last for years.
【100% Good Quality】We have all kinds of specifications here. If you need other specifications or a large number, you can contact us and we will give you a specification suitable for you and an affordable price. Thank you!.

Check Stock

BESPORTBLE Dumbbells Set Durable Training Equipment 66LB Adjustable Weights Dumbbells Set for Bodybuilding Training

FAST DELIVERY: US Stock Delivery within 3-5 Working Days ! ! !.
NON-SLIP GRIP: Adjustable fitness dumbbells set comes with connecting rod which is covered with non-slip nuts ensure a firm grip can provide you a....
MULTI-FUNCTION DESIGN: Dumbbells is connected by a connector rod to become a barbell to meet the needs of upper and lower body workouts, which helps....
ADJUSTABLE WEIGHT DUMBELLS: The weights dumbbells set including 4 different weights plates, you can adjust the weight of the dumbbell according to....
STRONG AND DURABLE: This high quality dumbbell set is made of cement weight plates and plating iron bar, weight plates covered with plastic to avoid....

Check Stock

DYWISHKEY Aluminum Round Rods Assortment Kit, Lathe Bar Stock, Diameter 1.0-8.0mm, Length 100mm for DIY Craft Making (27 Pieces)

√ Product type: High quality aluminum solid round rod lathe bar stock..
√ Package: Total 27 pieces aluminum rods, silver, smooth, easy to shape, no cracks formed..
√ Material: Premium high quality aluminum, corrosion resistance, light weight, easily be machined or welded..
√ Diameter: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, length: 100mm, total 9 different sizes 27 pieces..
√ Applications: DYWISHKEY 27 pieces 9 sizes aluminum rod lathe bar stock assorted are widely used in DIY craft making, model making, handle pin, making pins..

Check Stock