ReviewsPlastic Bushings

Quadratec Delrin Replacement Door Hinge Bushing Set - Fits Jeep Wrangler JK, JL 2-Door 2007-2022 - Synthetic Replacement Bushings - Lasts Longer than Factory Metal Bushings

  • SMOOTHS DOOR OPERATION - Over time your factory doors may not open and close as smoothly as they used to because the factory bushings are metal and wear out over time. Replace corroded and worn out door hinge pin bushings with our replacements.
  • LONG LASTING - Made from genuine DuPont Delrin, our synthetic door hinge bushings will never rust and will outlast the faulty factory metal bushings.
  • SNUG FIT - Our improved door hinge bushing design provide a snug fit while allowing your doors to open and shut smoothly.
  • EASY INSTALLATION - Door removal will never be any easier. Simply tap out your corroded factory bushings using the included aluminum removal punch. Our new bushings are precision machined to press into place by hand or a gentle tap.
  • INCLUDES - The Replacement Door Hinge Bushing include replacement bushings for the door hinges, removal tool and detailed installation instructions. The option with the EZ-ON Door Pin Guides helps to get your doors back on quickly & cleanly.
Check Stock

Bushing Kit fits Honda FourTrax TRX300FW 1988-2000 Front Upper and Lower A Arm Both Sides

  • Front Upper and Lower A Arm Bushing Kit - Both Sides - Heavy Duty Poly Bushings: includes 16-Poly Bushings, 8-Bearing Shafts..
  • Replace your worn rubber OEM bushings with upgraded Race-Driven Poly Bushings for more longevity and easier installation..
  • Bushings necessary to replace both sides of your quad..
  • Fits: 1988 - 2000 Honda TRX 300 FW Fourtrax 4x4, 1993 - 2000 Honda TRX 300 Fourtrax 2x4 (Does not fit 300EX).
Check Stock

Morris 21753 Anti Short Bushing, 1 Size, 14/4, 12/3, 6/1, 4/1 Cable Sizes (Pack of 35)

  • Electrical Bushings Anti-Short Bushings - Anti Short Bushings keep wires safe from sharp edges..
  • Anti short bushings insulates conductor from cut armor ends on flexible BX or Greenfield conduit.
  • Overlapping horizontal flange protects against sharp metal edges.
Check Stock

DASBET 17PCS Auto Bearing Race Seal Driver Disc Tool Master Set Wheel Axle Bushing

  • 【Direct use of】：Pneumatic bushing driver set removes and installs truck and trailer 1-3/8" anchor pin bushings and stuck anchor pins. Includes an 11-1/2" long driver that allows bushings to be driven straight without removing the hub assembly. Double-sided cone snaps onto driver to drive out and install bushings. Use flanged end to install and tapered end to remove. Also removes truck leaf spring bushings..
  • 【High quality】 : The use of high quality reinforced materials, wear and corrosion resistance, long service life, so that it has a longer peak work rate, I believe it can make your work more relaxed.
  • [Scope of application] : Truck bushing removal, which also includes removing pins and inserting bushings.
  • 【Buy With Confidence】: Lifetime warranty service, once there is a problem with the product, contact us here to solve it perfectly for you, without worrying about quality problems.
Check Stock

THE CIMPLE CO Single Feed Thru Bushing - (White) RG6 Feed Through Bushing (Grommet) Replaces Wallplates (Wall Plates) for Coax Coaxial Cable, Network Cable, CCTV - Indoor/Outdoor Rated - 10 Pack

  • Includes: 10 pieces WHITE single feed-thru bushings (available in BLACK sold separately).
  • Perfect For: Feed through bushings (also known as grommets) are used to seal wall openings and protect coaxial cables from damage as they pass through wall openings.
  • Protection: Weatherproof, UV resistant, and can provide a water tight seal (indoor and outdoor).
  • Quality: Constructed of high impact, UV stabilized, ABS plastic that provides a durable solution to running low voltage cables through walls.
  • Quality Assurance: UL Listed and Includes a US manufacturers warranty.
Check Stock

8 Pack Hood Roller Bushings for Peterbilt 357, 375, 379, Reference Part 13-04391, 13-03593, 377 with J Style Hinges, Polyurethane Hood Roller Bushing for Kenworth ATRO, Blue

  • 【Compatibility】 The set of Hood Roller Bushings include: 4 pcs Big Bushings fit for Peterbilt Models 357, 375, 379 # 13-03593.
  • ATRO # HM75-64593. 4 pcs Small Bushings fit for Peterbilt # 13-04391.
  • ATRO # PL1062. These Hood Roller Bushings fit Peterbilt 377 with the "J" style hinges. Measures 1.5", ID 0.5", OD 1.1"..
  • 【Direct Replacement】 Directly replaces your old broken or worn bushings, makes your hood roller work as normal. The hood roller bushing set is manufactured in accordance with original specifications. Save your charge and provide you with the performance, durability and long service time you expect from the original seal set..
  • 【Premium Quality】 Made of heavy duty polyurethane, which is tougher, stronger and could last 4 times longer than original rubber. Durable, ready to handle tough environments..
  • 【What You Get】 Package included: Premium Hood Roller Bushings x 8. Size / Dimensions: Larger Bushing (1-1/2" outer diameter, 1-5/8" long, 5/8" hole), Smaller Bushing (1-1/8" outer diameter, 1-9/16" long, 11/16" hole)..
  • 【100% Satisfaction Guarantee】 Your satisfaction is our priority. We strive to give our customers excellent service. All Sixcow products support 30-Day money-back guarantee, 12-Month ....
Check Stock

VMS RACING FRONT and Articulated Stainless Steel REAR LOWERING KIT Bolts and Bushings Compatible with Chevy Chevrolet Corvette C5 97-04 1997-2004 Complete Set

  • [ IMPORTANT ] VMS RACING Brand (NOT generic). Comes in VMS RACING Branded BOX. Brand New in Box / Never Used / Never Installed..
  • VMS Racing 14-piece Kit includes PREMIUM QUALITY, Grade-8 Bolts, Heavy-Duty Polyurethane Bushings, heavy-duty washers and Nylock nuts for the REAR. The FRONT is made of 100% CNC-machined STAINLESS STEEL with DELRIN BUSHINGS, WRENCH FLATS and ARTICULATING BALL STUD FOOT PADS for perfect alignment and smooth suspension travel..
  • Designed to lower your Corvette C5 up to 1.0 inch in the REAR and up to 1.5 inches in the FRONT. This is a DIRECT FIT. NO MODIFICATION to the STOCK COMPONENTS is required..
  • This kit has all you need to lower your front and rear end suspension on your Corvette C5. YOU NEED TO REPLACE THE BUSHINGS TO DO THIS JOB CORRECTLY. This set includes FOUR BRAND NEW POLYURETHANE BUSHINGS. The factory bushings on your C5 are close to 20-years old, DRY-ROTTED and NO LONGER SERVICEABLE. Do not buy any kit that does not include new bushings because you will end up having to source them elsewhere..
  • Compatible with Corvette C5 model vehicles 97 98 99 00 01 02 03 04 1997 1998 1999 2000 2001 2002 2003 2004 (does NOT fit F45, Selective Real-Time Dampening equipped Corvettes)..
Check Stock

Dime Bag Hardware Skateboard Truck Bushings 20-Pack for Venture Independent Thunder Soft Med Hard

  • 20 Bushings: 5 Sets of 4 / Enough for 10 Skateboard trucks.
  • 5 Different Hardnesses - Each color represents a different hardness. 88A/Blue, 94A/Yellow, 95A/White, 96A/Red, 98A/Black.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks. Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • These bushings are designed to be used in all modern skateboard trucks including Venture, Independent, Thunder, Royal, and more.
Check Stock

Hornady Match Grade 2 Die Set, 6.5 Creedmoor (.264) (544655) - Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die with Roll Crimp, Sure-Loc Rings, & Storage

  • ...655) give you total control over neck tension when resizing. Tight tolerances at the press translate into tighter groups at the range..
  • Find the Match Grade Bushing Dies You Need - these precision dies give the handloader more control over the loading process. They feature self-centering, interchangeable neck sizing bushings, that are held to strict tolerances to provide superior accuracy to eliminate the chance of over-sizing your case necks and overworking the brass (not included with die).
  • Full Length Sizer Die - features precision-polished elliptical expander to reduce friction and case-neck stretch. The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.
  • Seating Die - features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and seating stem, which pre-aligns the bullet and case before seating occurs. Hornady Bushings work in both the neck and full length Match Grade dies. The bushings are available in .001" increments..
  • Precise Machining for Accurate Reloading - Hornady reloading dies are designed for a true match to your chamber. Keep several appropriate Hornady die sets for each caliber size at your reloading ben....
Check Stock

Hornady Match Grade 2 Die Set, 338 LAPUA MAG (.338) (544399) - Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die with Roll Crimp, Sure-Loc Rings, & Storage

  • ...4399) give you total control over neck tension when resizing. Tight tolerances at the press translate into tighter groups at the range.
  • Find the Match Grade Bushing Dies You Need - these precision dies give the handloader more control over the loading process. They feature self-centering, interchangeable neck sizing bushings, that are held to strict tolerances to provide superior accuracy to eliminate the chance of over-sizing your case necks and overworking the brass (not included with die).
  • Full Length Sizer Die - features precision-polished elliptical expander to reduce friction and case-neck stretch. The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.
  • Seating Die - features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and seating stem, which pre-aligns the bullet and case before seating occurs. Hornady Bushings work in both the neck and full length Match Grade dies. The bushings are available in .001" increments..
  • Precise Machining for Accurate Reloading - Hornady reloading dies are designed for a true match to your chamber. Keep several appropriate Hornady die sets for each caliber size at your reloading ben....
Check Stock

Skateboard Bushings Washers Pivot Cups Nuts Truck Rebuild Kit for 2 Trucks Blue

  • Contains everything you need to completely rebuild your thrashed skate trucks!.
  • 2 Conical Bushings (Upper), 2 Cylinder Bushings (Lower), 2 Pivot Cups.
  • 2 Upper Bushings Washers and 2 Lower Bushing Washers.
Check Stock