ReviewsPlastic Cooling Fan

Winncon PWM Fan Splitter Cable 1 to 2 Converter, Black Case Fan Splitter Cable, Case Fan Power Duplicator Converter, Dual Case Fan Power Adapter, 10.6 inch (1 Pack)

❤One Divinded into Two: one 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
and one 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans.
❤Keep Same Speed: 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
Fans can spin at the same speed using software from a motherboard equipped with PWM control.The fan adapter is compatible with 3-pin and 4-pin PC fans..
❤Increase Airflow: This PWM fan splitter cable connects 2 computer case fans to a single motherboard fan header to increase airflow in your computer case, adding ventilation and regulating the fan speed in a computer case ..
❤High quality: The cooling fan cable is covered with fine plastic for long-term years’ use. High quality high density black sleeved able, 24AWG, and the length is about 10.6 inch (27cm)..
❤This Dual Case Fan Power Adapter is compatible with popular brands of computer case cooling fans, and can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..

Check Stock

Comfort Zone CZST180BK PowrCurve Pedestal Fan, 6 Blades, Tri-Curve Grill, 180-Degree Adjustable Tilt, 3-Speed, 18-inch, Black

...lt it will cut off electric current to the fan, preventing a potential safety hazard..
Simple No Tools Assembly - means you'll have your fan assembled in no time. Simply follow the included instructions to assemble the base mount to the extension pipe, fan blades and grill and you're done. This fan is both metal and plastic. The motor and other parts are metal, while other parts are plastic.

Check Stock

620-022 Radiator Cooling Fan CH3115118 Fit For 2001 2002 2003 2004 2005 Chrysler PT Cruiser 5017407AB

【Fitment】: Fit for 2003-2005 Chrysler PT Cruiser Radiator Cooling Fan Assembly Excluding Turbo Models,2001-2002 Chrysler PT Cruiser Radiator Cooling Fan Assembly( Excluding Turbocharged Engines).
【Manufacturer Part Number】:CH3115118,5017407AB,5017407AA 【Interchange Part Number】:620440,620-022.
【Specification】: Fan Diameter: 16.14″ / 41cm.
【Application】: Keep your engine at the right temperature under a variety of conditions,Maximum cooling efficiency.Easy to install and use..
【Kindly Noted】: Please verify that the above number is consistent with your old product.All units are test-fitted onto the corresponding radiators prior to release to ensure precise, consistent fit.Perfect Match for the Original Car..

Check Stock

UCTRONICS for Raspberry Pi 4 Dual Fan, Pi 4 Cooling Fan with Heatsink, Dual Fan Kit for Raspberry Pi 4 Model B

Specially suitable for the Raspberry Pi 4 Model B --- One dual cooling fan(50*25*13mm), one thermal tape(50*25*1mm) and two heatsinks(9*9*5mm), perfectly fit to the CPU and the other chips of the Raspberry Pi 4 Model B..
High speed and low noise --- The DC 5V dual cooling fan run quietly at high speed, effectively get rid of the noise..
Efficient heat dissipation --- The dual fan can be close to the heating chips for efficient heat dissipation with the thermal tape (It can stick the cooling fan with Raspberry Pi stably)..
Aluminum alloy material --- High quality aluminum material improves efficient heat dissipation, tough and durable..
Easy to install --- Remove the plastic film on the upper layer of the thermal tape and then stick the thermal tape to the bottom of the dual fan. Put the dual fan on the Raspberry Pi 4 Model B motherboard, then connect the red cable to the second pin, connect the black cable to the third pin. Stick the two heatsinks to the capacitance chip and the LAN chip..

Check Stock

Laptop Cooling Pad, Laptop Cooler with Temperature Display, Rapid Cooling, Auto-Temp Detection, 13 Wind Speed(2600-5000RPM), Perfect for Gaming Laptop, Nintendo Switch

...t to choose. You can adjust the suitable angle by your needs to relieve the fatigue of the back and neck effectively . The phone holder is stored on the left side of the laptop cooling fan, you can expand it and place your phone to view information easily..
【Craft Upgrade】The base and shell made of thermosetting plastic have better texture and are stronger at the same time. The computer cooling pad is compatible with 11-17.3 inch laptop. The two USB ports are reinforced and matched with the braided wire USB cable, which will not loose or fall off easily. The 2 silicone sleeves are used to heighten the anti-skid buckle, which is suitable for large and heavy laptop..

Check Stock

DNA Motoring OEM-RF-0052 Factory Style Radiator Cooling Fan Shroud Cooling Efficiency Improved Direct Replacement [Compatible with Toyota Tacoma 1995-2004 / 4runner 1996-2001 Fits 2. 7L]

【Fitment】Compatible with Toyota Tacoma 1995-2004 / 4runner 1996-2001 Fits 2. 7L Models Fits 2wd Prerunner Fits 4wd With Automatic Transmission.
【Design】High Quality ABS Plastic Housing OEM Factory Style Radiator Cooling Fan Shroud Design for Direct Replacement with the Original Part.
【Function】 Continuously Improves the Cooling efficiency, Set the Performance of Your Vehicle to a Higher Level.
【This Item Includes】1 X Radiator Cooling Fan Shroud with High Quality ABS Plastic Housing.
【Note】Professional Installation is Highly Recommended.
Installation Instruction is NOT Included.

Check Stock

DNA MOTORING OEM-RF-0061 Factory Style Radiator Cooling Fan Assembly Cooling Efficiency Improved Direct Replacement [Compatible with C300 / Challenger/Charger/Magnum/Viper]

【Fitment】Compatible with Chrysler 300 2005-2009.
Compatible with Dodge Challenger 2008-2011 / Charger 2006-2009 / Magnum 2005-2008 / Viper 2008-2010 Fits 2. 7L 3. 5L 5. 7L 6. 1L 8. 4L Models.
【Design】Long Lasting Performance Sealed Motor, High Quality ABS Plastic Housing OEM Factory Style Radiator Cooling Fan Design for Direct Replacement with the Original Part.
【Function】 Continuously Improves the Cooling efficiency, Set the Performance of Your Vehicle to a Higher Level.
【This Item Includes】1 X Radiator Cooling Fan Assembly with Sealed Motor and High Quality ABS Plastic Housing.
【Note】Professional Installation is Highly Recommended.
Installation Instruction is NOT Included.

Check Stock

3 Speed Portable Outdoor Cooling Misting Fan Blue Plastic Tilt Head

3 Speed Portable Outdoor Cooling Misting Fan Blue Plastic Tilt Head.
DUAL-PURPOSE: Use with misting function to cool the environment, or without misting as a professional utility fan to dry and ventilate!. Features a sealed motor to protect it from contaminants and water damage. Lightweight, compact and durable polypropylene (PP) plastic housing design. A portable cooling solution that creates a comfortable outdoor environment. Reduce ambient temperature up to 30 degrees. 3 adjustable speeds with 135 rotational positions. Material : Plastic.
Measures 6.75 inches long x 3.82 inches wide x 7.22 inches high. 7 ft. power cord with wrap-around cord design. Low 1.2 Amps draw with 600 CFM maximum airflow capacity. Assembly : Assembled. Color : Blue. Number of motor speed : 3. Misting, Outdoor, Tilt Head. Use : Commercial Use, Home Use. Dimensions : 13.3 In. X 12.3 In. X 15.2 In..

Check Stock

XPOWER P-430AT Pro 1/3 HP 2000 CFM Centrifugal Air Mover, Carpet Dryer, Floor Fan, Blower, Daisy Chain, for Water Damage Restoration, Janitorial, Plumbing, Home Use

3 powerful speeds -it makes this fan ideal for the bedroom, kitchen, living room, or anywhere else you need a high velocity fan. the powerful motor and plastic fan blades provide a cooling breeze through out the room..
customize your desired airflow: Tilt angle allows you to direct air up, down, or anywhere in between making this fan great for cooling or ventilation of your room..
built in handle-this fan built-in handle for easy carry, handle will help you move this floor fan anywhere easily..
easy assemble-you'll have your fan assembled in 5 minutes. simply follow the included instructions to assemble the fan with the fan stand and you're done.

Check Stock

COSTWAY Metal Pedestal Fan, 18-Inch Quiet Oscillating Standing Fan with Height Adjustable, 3 Wind Speed, 4 Blades, Widespread Stand Floor Fan for Bedroom, Room, Home, Office, Shop (Black bronze)

...lt it will cut off electric current to the fan, preventing a potential safety hazard..
Simple No Tools Assembly - means you'll have your fan assembled in no time. Simply follow the included instructions to assemble the base mount to the extension pipe, fan blades and grill and you're done. This fan is both metal and plastic. The motor and other parts are metal, while other parts are plastic.

Check Stock

Phanteks Enthoo Pro Full Tower Chassis with Window Cases PH-ES614P_BK,Black

Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks’ new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port.
Appearance: Brushed plastic with an aluminum appearance.
Stealth interior: hidden PSU / hidden HDD.
The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations.
Innovative liquid cooling mounting systems.Closed HDD panel strengthens the chassis’ rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.).

Check Stock