ReviewsPlastic Engraver Tools

Electric Engraving Machine Mini DIY Etcher Engraving Carve Machine Tool Kit with Diamond Tip Bit to Engrave on Metal Glass Ceramic Plastic Wood Jewelry Stone

  • ▲Smooth to control. Perfect for beginners and expert technicians. This engraver makes steady, easy lines and writes like a pencil. Our engraving device permits precision cordless engraving with permanent identifying markings by everyone..
  • ▲Infinite possibilities. Its programs include engraving tools, carrying goods, toys, smartphone chargers, and the sensitive personalization of jewelry, watches, and glassware. Also practical as a timber engraver, or a part of a metal engraving package.
  • ▲Fantastic nice. This electric-powered engraving gadget has a high pace 18,000 RPM jap motor. It's far sturdy sufficient to engrave steel..
  • ▲Properly overview. 6 months guarantee..
  • ▲This is a should have device for anyone. Best present for DIY..
Check Stock

xTool D1 36w Higher Accuracy Laser Engraver with Material Box, 5w-7.5w Laser Cutter and Engraver Machine, Support LightBurn, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Paper(17'x15.98')

  • 【Finer Details by 0.08*0.08mm Ultra-fine Compression Spot】xTools D1 is the Best DIY laser cutter and engraver machine for beginners/business starter/ hobbyists/designers/home-makers/professionals. It adopts the latest high power 5-7.5W laser module with 0.08mm ultra-fine compressed spot, cutting speed up to 10000mm/min, can cut 8mm wood board and 3mm acrylic in one pass, directly engrave uncoated stainless steel.
  • 【Higher Accuracy Cutter and Engraver Machine】The all-steel wheel and shaft and synchronous belt enable motion accuracy of up to 0.01 mm and repeatable positioning accuracy of less than 0.02 mm, allowing the xTool D1 laser engraving machine to engrave and cut all details of design drawings 1-to-1 with high silence throughout. It maintains a perfect engraving effect even after long times use.
  • 【All in One Kit】These xTool D1 kit comes with the xTool D1 laser cutter and engraver machine, rotary attachment and laser material Box. With a rotary attachment, xTool D1 can engrave diameter cylinders as small as 3mm. The laser material box include 10 kinds of popular materials, including metal, wood, rubber, etc. You can start your creation quickly with xTool D1 Rotary attachment and Materail kit.
  • 【Wide Compatibility and Multiple Connection W....
Check Stock

Comgrow Z1 Laser Engraver 10W Output Power, 24V Desktop 48W Laser Cutter and Engraving Machine with Eye Protection Compressed Laser Spot 0.08mm, 10000mm/min Diode Laser Cutting for Metal Wood

  • 【DUAL Y-AXIS MOTOR】: The Y-axis of acrylic engraving machine is extremely smooth and extremely mobile. Not only provides almost unbelievable speed when engraving but also increases the stability and accuracy of the project..
  • 【Extensive software adaptability & Multiple connection methods】:Z1 laser engraver can be compatible with various mature engraving software, LightBurn for experirenced laser user and LaserGRBL for new laser user. LaserGRBL Support Win 7 / Win 8/ Win 10/Win XP,LightBurn supports window /Mac /Linux system.And you can transfer data via Wi-Fi, USB cable, and SD card and use Z1 laser cutter and engraver machine anytime and anywhere..
  • 【SUPPORT EXPANSION】: This device It can be upgraded with Comgrow rotary roller, perfect for engraving tumblers and cylindrical objects! It has a stable design for multiple diameters. Spacing between the two rotary axes ranges from 8mm(0.31in) to 86mm(3.9in). You can engrave angthing you want..
  • 【quality assurance & Easy to use】The Z1 laser engraver can usually be assembled in 10-20 minutes. The new laser head comes with a focusing plate, allowing you to quickly and easily adjust the focus without any tools. In addition, we provide customers with one-year free parts replacement ....
Check Stock

LaserPecker L1 Laser Engraver, Mini Engraving Machine Portable Laser Etcher, Compressed Spot High Precision Grabadora Laser with Protective Goggles - Black

  • The Most Useful Mini Laser Engraver: Do you want to create inspiration anytime at home? Or want to make exclusive gifts for your friends and family during the holiday season? Or want to customize your logo in small batches? LaserPecker L1 Laser Engraver meet your needs!.
  • LaserPecker L1 Laser Engraver: 0.3mm Compressed Spot, engraving range: 3.9″*3.9″. Focal length: 7.5″(the distance from laser unit to the surface of engraved item). Support power supply through 5V 2A mobile power supply. COULD ENGRAVEING: Wood, Kraft paper, Leather, Fruit, Felt etc. COULDN’T ENGRAVEING: Metal, Glass, plastic, stone..
  • Compact Design: LaserPecker L1 Engraving Machine is very small size, only 2.6″ * 2.4″ * 2.1″, Weight 6 oz, can be mastered in one hand, it is a real handheld laser engraving machine. Perfect for entry-level creators, you can do a lot of inspiration without expensive prices and taking up less space..
  • Durable and Safe: Laser etching machine with high quality 1.6W laser head make durablity, better stability and long working time. Multiple safety features such as Working warning alert, Displacement automatically stops when engraving, Overheat shutdown, Enter password before work will keep you safe from accidents. Safe Certification: CE, FCC, FDA, R....
Check Stock

SCULPFUN Laser Engraver Enclosure with Vent, Fireproof Laser Cutter Protective Cover, Smoke & Odor Insulation, Noise Reduction, Eye Protection, Suitable for Most Laser Engraving Machine, 700x700x460mm

  • 【High Strength Fireproof Material】The laser engraver enclosure is made of high-quality double-sided silicone coated Plexiglas fiber that can withstand temperatures up to 1832°F (1000°C) and is resistant to instantaneous high temperatures. Please watch the video, we tested with fire for a few minutes without any problem..
  • 【Large Size & Wide Applicability】Extra large space for laser engraving machine protection cover (700*700*460mm/27.5*27.5*18in). Higher than other laser enclosure, can be used for laser rotary roller engraving taller objects. Compatible with most engraving machines on the market, such as fiber/co2/k40 laser engraver, as long as the size is within this range..
  • 【Eyes Protection & Slanted Viewing Design】Laser cutter enclosure viewing window size 53x60mm (20.8*23.6inch), made of double-layer dark PVC material, which can reduce the blue light produced by laser engraving and protect your eyes. The beveled design of the laser enclosure allows you to better observe the machine operation, giving you a good laser engraving experience..
  • 【Noise Reduction, Smoke & Odor Insulation】The laser enclosure isolates 99% of dust particles, smoke, odors, and noise during the cutting and engraving process. Ensuring your safe and healthy laser ....
Check Stock

USB Cordless Electric Engraving Pen Kit, Mini 3-Speed Rotary Etching Machine Engraving Jewelry Leather Wood Glass,42pcs Engraver Tools for Metal with 30 Bits&Stencil

  • Portable USB Engraver:These engraving tool powered by USB interface. Cordless using will be up to 60 minutes idling after full charge. Easy to help you finish better engraved craft and outdoor working..
  • 3-Speed&High Quality:3 position adjust rotation speed from 5000-25000 r/min to apply different requirements. The lowest speed will let you polishing your nail in safe, the highest speed are also working on metal carving.Metal engraver pen equips with excellent motor,heat dissipation design,qualify circuit chip to allow long time using..
  • Various Bits for Beginner:these engraving rotary tools kit include 30 grinding bits, 2 drill bits, 3 saw blades,1 tungsten steel bit,4 words stencil. The tungsten steel bit own 91HRA hardness,which special sharp on metal and glass.all these are easy for beginner to work on engraving, carving, sanding, polishing, etching, routing, grinding, drilling, cutting..
  • Start Engraving Now:Our metal engraving machine fit for almost all material surface as long as you choose right bits,on metal, glass, ceramic, leather, wood,jewelry,stone ,jade or statue.they are convenience to take anywhere and....
Check Stock

The Original Easy Etcher - Includes 10 Stencils - Portable Precision Engraving Pen - DIY Engraving Tool - Electric Engraver Etching Craft Scribe - Jewelry, Metal, Glass, Leather, Wood Carving Tools

  • The Easy Etcher is a portable engraver that lets you customize and create one-of-a-kind items!.
  • Works on nearly any surface - including glass, metal, wood, plastic, ceramic, leather, jewelry, and more!.
  • Make your work stand out! You get specialty tips for new line styles. A sandpaper kit to fix mistakes. And stencils to get you started..
  • No cord. No bulky engraver. No hand-strain. Our lightweight, aluminum frame & ergonomic tri-lobal grip means comfortable engraving, anywhere..
  • Improved high performance motor & stability mechanics give you better control & precision over competing brands. Includes a 6-month warranty..
Check Stock

Ebamaz 304 Stainless Steel Thick 0.5mm Metal Business Cards Blank Tablet 86X54mm Pack of 10PCS Silver Brushed Finishing Blank

  • 1. Blank Cards, thick & firm, thickness 0.5mm,not easy to bend. 304 stainless steel material, brushed finishing silver surface.10PCS single color per....
  • 2. High class metal business card design, blank /round corner/edge not rough. Suitable as VIP card or gift metal card for company or organization to....
  • 3. It is a good choice as Promotion Metal Business VIP Cards / Promotion Gift Card / Metal Plaque / Nameplate / Desk Tag / Lable tag / Name Card /....
  • 4. Make sure your engraver is powerful enough to engrave metal, ours is fiber laser machine 15W for your reference. These metal business cards can NOT....
  • 5. These cards mainly for engraving, please Notice: CO2 engraver CAN NOT engrave metal material, it mainly engraves wood, Acrylic, leather, plastic,....
Check Stock

LaserPecker 3(Basic) Laser Engraving Machine, Fiber Laser Engraver 1064nm Cold Red Light 0.01mm Compressed Spot, 48000mm/min High Speed Handheld Fiber Laser Marking Machine for Metal Jewelry Plastic

  • Fiber Laser Engraver for Metal and Plastic: LaserPecker 3 laser engraver with 1064nm fiber laser for metal and plastic materials. e.g: stainless steel, gold, silver, aluminum, titanium, copper, coated metal plate.
  • acrylic, plastic, etc. Can be directly engraved without any preprocessing..
  • Much Smaller Compression Spot: LaserPecker 3 laser engraving machine adopts a 0.01mm*0.01mm ultra-fine compression spot, achieving detailed and vivid engraving images. Present pixels with 4K level perfectly..
  • Ultra Fast Engraving: LaserPecker 3 fiber laser marking machine with innovative galvo technology achieves high-speed engraving at 48000mm/min. Comparable Industrial-grade engraving speed brings a subversive experience..
  • Easy To Focus, Quick To Start: LaserPecker 3 laser engraving machine adopts dual infrared light positioning design (When the two red light spots are coincident, the focus is correct), which can accurately locate the marking position without offset and good position.
  • Quickly and accurately control the lifting of electric stand, can be realised easy focus on objects of different heights..
  • Versatile Base, Create With Easy: With the help ot the positioning plate on the base, the position of the engraving objects can be fixed/adjusted, making batch engra....
Check Stock

TUNTROL 780W Flex Shaft Rotary Tool, Thicken 1/4' Shaft Foot Pedal Control Hanging Grinder Carver Electric Multi-function Metalworking Tools Repair Kit

  • 【Thicken Shaft】Our 1/4" Shaft is double stronger than 5/32" shaft, which give you more confidience on cutting or drilling bigger work pieces..
  • 【Powerful Motor】Our flexible shaft rotary tool is equipped with a powerful and stable 110V 780W motor, which can provide the speed of 500-24000 RPM. This rotary engraver machine is ideal for large-scale work that cannot be completed by mold grinder or rotary tool. Which can enough for limitless purposes from your DIY furniture remodeling to intricate automobile repairs and expert jewelry making..
  • 【Comfortable Stepless Speed Foot Pedal】 The foot pedal adds a lot comfort during work. The ABS plastic foot pedal for flex shaft rotary tool is sturdy and more secured for preventing heat production or transfer..
  • 【1/4" 3-Jaw Chuck】The stable and convenient 3-jaw chuck for the jewelers tools accepts accessories from 1/64", 1/32", 1/16", 3/32", 1/8", 5/32", 3/16", 1/4"to enhance versatility. Attachments are easy to replace and strong clamping force holds them firmly on the flex shaft drill under high pressure..
  • 【105+30pcs Tool Accessories】This high-performance rotary tool kit is extremely useful for cutting, drilling, sanding and polishing in small and delicate areas. These sanding power tools are sensit....
Check Stock

Atomstack A5 pro Laser Cutter and Engraver Machine by UESUIKA, 40w Diode Laser Engraving Machine, 5-5.5W Optical Power, Easy Assembly, Eye Protection Fixed Focus Compressed Spot

  • 【Get a free Laser Engraving and Cutting Materials】 Please click the "Promotion Available" button ,then click "Add both to Cart".
  • you will get a free Laser Engraving and Cutting Materials as you order Atomstack A5 pro laser cutter.
  • 【Reason for Choice】The A5 pro laser engraver has a large engraving range of 15.74 x 16.1inch. 5.5W Optical output power of laser. Fixed Focus Compressed Spot, higher accuracy, and more refined engraving products. It can not only engrave but also cut 1/5" of the wood and acrylic..
  • 【Create Your Own Logo】The A5 pro 40W laser engraver for home can meet your daily needs. It can engrave on wood, bamboo, paper, plastic, leather, PCB board, aluminum oxide, non-reflective plating and lacquered metal, ceramics. You can engrave your own logo for your favorite items..
  • 【Assembly is quite easy】Everything is neatly packaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The entire setup was about 30 minutes..
  • 【Perfectly compatible system】The laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Window....
Check Stock