ReviewsPlastic Hose Barbs
ACE GLASS 9250-08 Cold Finger Condenser for Distillation Head and System, 19/22 Joint Size
Acrylic Waste Container with Lid
- Quick-connect cap adapters for quick and easy port changes.
- Two-piece open cap and adapter design prevents tube twisting when opening.
Justrite 12808 VaporTrap Carboy with Filter Kit, 83mm, 20L, 7 Ports
- Quick-connect cap adapters for quick and easy port changes.
- Two-piece open cap and adapter design prevents tube twisting when opening.
Justrite 12813 VaporTrap Carboy with Filter Kit, 83mm, 20L, 7 Ports
- Quick-connect cap adapters for quick and easy port changes.
- Two-piece open cap and adapter design prevents tube twisting when opening.
UDP T10004006 Clear Vinyl Tubing 5/16ID X 7/16OD X 100 ft Dispenser Box
- Suitable for use with liquids, chemicals and gases.
Fuel Line 3/8 Inch ID NBR Fuel Line Hose 6AN Push on Hose for Small Engine 10 Feet
- Size: ID: 3/8" (10mm), OD: 5/8 inch (16mm), AN6 Fuel Hose, Length: 10FT..
- Material: This small engine fuel line is made of high-quality NBR, which is oil resistant..
- Working Pressure: 0.6Mpa, Burst Pressure: 1.8Mpa, Temperature Range: -40°F to 248°F..
- Application: Designed for conveying gasoline, diesel, biodiesel fuel, engine oil or water in car, truck, bus, automotive, etc. Please check the pressure of application before purchase..
- How To Use: Use hose barbs and fuel line clamps to install..
Whatman 6721-5010 Polydisc TF PTFE In-line Filter 1.0 Micron, 13 psi Maximum Pressure, 900 Flow Rate (Pack of 10)
- Materials of Construction: Inlet-Cover, Base, and Collar Cap: Anodized aluminum, Hose Barb Adapters: Polyethylene, Support Screen and Underdrain Disc: Electropolished type 316 stainless steel, O-Ring: Viton, Thrust Ring: PTFE and Effective Filtration Area 9.6 cm2.
- Dimensions: Overall Length (Excluding Hose Barbs): 5.7 cm (2.2 in.), Diameter: 5.9 cm (2.3 in.), and Inlet/Outlet Connections: 3⁄8 in. FNPT.
- hose barb adapters accept 6.4 mm (1⁄4 in.) ID tubing..
- Maximum Operating Temperature: Limited by filter type, hose barb adapters 93 °C (199 °F), or O-ring 204 ºC (399 ºF) and Maximum Operating Pressure 14 bar (1400 kPa, 200 psi)..
- Sterilization: Provided non-sterile. Autoclavable if desired at 121 - 123 ºC (250 - 253 ºF) at 1.0 bar (100 kPa, 15 psi) for 15 - 20 min..
- Pall 47 mm In-line Lab Filter Holder, Lightweight, Anodized Aluminum Filter Holder Convenient design allows opening and closing without disrupting membrane. Designed for in-line liquid or gas filtration, Durable construction for stack sampling. Type Filter Holder.
Lupulin Market LM-SANKEYD Beer Coupler, Sankey D, Stainless Steel Probe, Commercial Quality, Includes: 5/16" Barbs and Hose Clamps, D, Silver
- Commercial grade Sankey ‘D’ Keg coupler for domestic brand kegs (I. E. Bud, Coors, miller, American craft beer)..
- Nsf approved coupler that features a durable chrome plated brass body with a stainless steel Liquid probe..
- Built in safety features include a pressure relief valve that is rated up to 53 psi (3. 7 bar)..
- Comes with (2x) 5/16″ Tailpieces. Liquid and gas connections are standard beer nut threads (7/8″-14)..
- Short black lever style handle that will fit into the smaller diameter kegs (tall 1/4 Barrel kegs)..
- Threads are the standard beer nut so can use your existing beer and gas lines..
- Included Components: Sankey D Coupler, Hose Barbs, Hose Clamps.
Fuel Line 1/2 ID NBR Hose 8 AN Push on Hose 12.7mm ID 8AN Fuel Injection for Small Engines, 3 feet
- ID: 1/2" (12.7mm), OD: 0.78 inch (19.7mm), AN8 NBR liner hose, 3 feet.
- Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines.
- Working Pressure 2Mpa. Burst Pressure 5Mpa, Handles temperature ranges of -40 to +275 degrees F.
- Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc.
- The Fuel Lines for fuel injected systems, are oil resistant,cold-resistant and ethanol tolerance.
Irrigation Fittings Kit Hoomtry Drip Irrigation Barbed Connectors for 1/4-Inch Tubing Flower Pot Vegetable Garden Lawn（Straight Barbs Tees Elbows End Plug 4-Way Coupling）
- Plastic 1/4 Irrigation Fittings Kits: 208 Pcs 1/4 inch drip irrigation tubing kits total, 80 straight barbs, 68 three-way pipes, 20 elbow fittings, 20 end plugs and 20 four-way pipe joints, the number is sufficient to meet your needs for garden irrigation accessories various needs..
- No tool required: The lrrigation fittings kit secure, Easy to install without glue, tools, or clamps. Barbed ends grab tubing for a secure leak-proof connection.
- Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting..
- Confirm Drip Irrigation Tubing Size: These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. Jumpstart your drip irrigation system installation with this set of essential components for building a maintenance-free drip system.Please check the size carefully before purchasing..
- Easy to Use: This irrigation fittings kit is made of quality engineering plastics that is durable, strong, water resistant, chemical-resistant for long time using. These drip irrigation accessories work well with the tubing..
- Excellent customers service: You are not completely satisfied with Hoomtry plastic drip irrig....