ReviewsPlastic Hose Fitting

Shoreline Marine Bilge Pump Plumbing Kit | Plastic Bilge Pump Hose | 2 Stainless Steel Hose Clamps | Easy Installation | Heavy-Duty Marine Accessory

BILGE PUMPS & PLUMBING: The kit is among the functional boat accessories that allow you to remove the accumulated water from the bilge. This kit consists of a plastic bilge pump hose, thru-hull fitting, and 2 stainless-steel hose clamps..
HIGH COMPATIBILITY: Irrespective of the size of the boat, this high utility water pump works in accordance with 3/4" x 5" of the plastic bilge hose. This kit contains everything you need for bilge pump installation..
EASY TO USE: With a pack of all the essential parts and equipment required to perform the pumping task, this kit makes it one of the best marine boat accessories. It is fast and easy to use..
DIMENSIONS: The kit consists of 3/4 inches and 5 inches of plastic bilge pump hose, along with a thru-hull fitting and 2 stainless-steel hose clamps that work efficiently to remove the excess water from the hull. It works wonders with a bilge pump float switch..
CALCUTTA OUTDOORS: A leading manufacturer of consumer products for the outdoor sports and recreation market providing performance-driven products, including fishing rods, ta....

Check Stock

Anderson Metals - 57002-0604 Brass Hose Fitting, Connector, 3/8\ Barb x 1/4\ Female Pipe

Adapter for connecting pipes or fittings of different types.
Fitting connects to hose on one end and has an NPT female connector on the other.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Joywayus 1/4'(6mm) ID Hose Barb 4 Way Union Fitting Pipe Cross Intersection/Split Brass Water/Fuel/Air

1/4" barb tee to connect 1/4" I.D. hose,we can provide customized orders,including oem..
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).For use with plastic or rubber hose.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Check Stock

F-AL-3/8, 3/8″ Threaded Female Tank Filter for Mosquito Misting Systems

... Specifications} 110 Volt Kit Includes: – 200PSI Booster Pump with Plug (110v) – 50ft Flexible Tubing – Calcium Inhibitor Filter – 12 Brass/Stainless Steel Mist Orifice Nozzles – 0.012” – 11 – Push Lock Mist Tees – 1 – Push Lock End Mist Elbow – 6ft Feed line with 3/4 Garden hose connector – Plastic Clamps.
{Installation} – Push Lock Fittings – Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
{Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
{Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock. MC12020.

Check Stock

Brass Hose Barb Tee 1/4 x 1/4 x 1/4 Barbed T -Fitting 3 Ways Air Hose Fittings Pack of 5

1/4" barb tee to connect 1/4" I.D. hose,we can provide customized orders,including oem..
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).For use with plastic or rubber hose.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Check Stock

10 Foot Long Dust Collection Power Tool Hose Kit for Multiple Types/Brands of Power Tools and Work Shop Vacuums with Threaded Fittings

...s kit will also work with popular tools like the K4 and the K5 Pocket Hole Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage.
The large thread-on rubber fitting has a 1-1/2 inch I.D. with a 1-13/16 inch O.D. which works on many other power tools. The rigid plastic vacuum Plug-in Adaptor has a 2-1/4 inch taper up to 2-5/16 inch O.D. The adaptor is designed to plug into most standard workshop vacuum ports. The Plug-in Adaptor conveniently threads onto the power tool hose so it will never slip off!.
Included inside the box: 1 each ten foot long 1-3/16 inch O.D. small diameter flexible hose, 1 each small flexible rubber thread-on fitting, 1 each large flexible rubber thread-on fitting and 1 each Plug-in Adaptor shop vacuum that will allow you to connect the hose to most commercial or residential workshop vacuum ports..
IMPORTANT! CHECK YOUR POWER TOOL PORT DIMENSIONS: Before placing an order, please check the inner and outer (I.D. and O.D.) diameter of your workshop vacuum ports and power tool ports to make sure the hose and fittings will properly fit and work for your needs. THE I.D. AND O.D. ON THE RUBBER END FITTINGS AND HOSE ARE APPROXIMATE SIZES AND MAY SLIGHTLY VARY..

Check Stock

M MINGLE Pressure Washer Adapter for Gun and Power Washer, Only Compatible Karcher Hose, to M22 14mm Female Fitting

Pressure washer adapter with karcher plug, only fits karcher hose. Easy to connect and disconnect..
Pressure washer karcher hose adapter converts to M22 14mm female fitting. It connects to pressure washer or power washer gun..
Power washer adapter with Karcher hose also can connects to pressure washer hose (M22 fitting), it can extend your hose..
Karcher pressure washer accessories made of aluminum and tough plastic housing..
M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..

Check Stock

10 Foot Long Dust Collection Power Tool Hose Kit with 6 Threaded Fittings/Attachments for Multiple Types/Brands of Power Tools and Work Shop Vacuums

...s kit will also work with popular tools like the K4 and the K5 Pocket Hole Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage.
The large thread-on rubber fitting has a 1-1/2 inch I.D. with a 1-13/16 inch O.D. which works on many other power tools. The rigid plastic vacuum Plug-in Adaptor has a 2-1/4 inch taper up to 2-5/16 inch O.D. The adaptor is designed to plug into most standard workshop vacuum ports. The Plug-in Adaptor conveniently threads onto the power tool hose so it will never slip off!.
Included inside the box: 1 each ten foot long 1-3/16 inch O.D. small diameter flexible hose, 2 each small flexible rubber thread-on fitting, 2 each large flexible rubber thread-on fitting and 2 each Plug-in Adaptor shop vacuum that will allow you to connect the hose to most commercial or residential workshop vacuum ports..
IMPORTANT! CHECK YOUR POWER TOOL PORT DIMENSIONS: Before placing an order, please check the inner and outer (I.D. and O.D.) diameter of your workshop vacuum ports and power tool ports to make sure the hose and fittings will properly fit and work for your needs. THE I.D. AND O.D. ON THE RUBBER END FITTINGS AND HOSE ARE APPROXIMATE SIZES AND MAY SLIGHTLY VARY..

Check Stock

DERNORD 2 Pack 1.5\ Tri Clamp to 0.5\ Hose Barbed Adapter SUS304 Sanitary Hose Barb Pipe Fitting

Adapter for connecting pipes or fittings of different types.
Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
For use with rubber hoses: Barb: 1/2" Barb For Rubber, Plastic, TPU, or other hose.
Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.

Check Stock

DERNORD 1.5\ Tri Clamp to 1\ Hose Barbed Adapter SUS304 Sanitary Hose Pipe Fitting (1 Inch Barb Hose)

Adapter for connecting pipes or fittings of different types.
Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.
Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.

Check Stock

Keg Kit with 5 Gallon Ball Lock Keg, 5 lb Aluminum CO2 Cylinder, Regulator, and All Accessories

...s hose can withstand the co2 gas pressure value that can be up to 70 psi, you can attach this hose to ball lock quick disconnect fittings to transfer brewing gas co2 for carbonating beer, kombucha and other beverage at outdoor picnic, party, etc, you also can use this hose at garden activities..
Reliable Durable PVC Plastic: this 15 feet keg draft co2 gas line is made of healthy plastic, will not rot, swell, dry out, no ordors and unaffected by normal cleaning compounds, strong oil resistance, smooth surface makes cleaning easy, keeps pure beverage carbonation gas..

Check Stock